I. Etsion

发表

Discussion: “An Improved Short Bearing Analysis for the Submerged Operation of Plain Journal Bearings and Squeeze-Film Dampers” (Pan, C. H. T., 1980, ASME J. Lubr. Technol., 102, pp. 320–331)

I. Etsion, 1980 .

Closure to “Discussion of ‘Fluid Film Dynamic Coefficients in Mechanical Face Seals’” (1983, ASME J. Lubr. Technol., 105, p. 503)

I. Etsion, I. Green, 1983 .

The dual action gas thrust bearing - A new high load bearing concept

I. Etsion, 1977 .

Discussion: “A Zero-Leakage Film Riding Face Seal” (Lipschitz, A., 1985, ASME J. Tribol., 107, pp. 326–330)

I. Etsion, 1985 .

A new hybrid magnetic fluid seal for liquids

I. Etsion, Y. Zimmels, 1986 .

Feasibility study of a controlled mechanical seal

I. Etsion, Z. J. Palmor, N. Harabri, 1991 .

Enhancing Sealing and Dynamic Performance with Partially Porous Mechanical Face Seals

I. Etsion, O. Michael, I. Etsion, 1994 .

Discussion: “Hydrodynamic Lubrication of Finite Slider Bearings: Effect of One Dimensional Film Shape, and Their Computer Aided Optimum Designs” (Bagci, C., and Singh, A. P., 1983, ASME J. Lubr. Technol., 105, pp. 48–63)

I. Etsion, 1983 .

A thermohydrodynamic analysis of a misaligned mechanical face seal

I. Etsion, M. D. Pascovici, I. Etsion, 1993 .

Experimental Investigation of a New Concept Viscous Pump

I. Etsion, Itzhak Green, M. Mainland, 1991 .

A Kinematic Model for Mechanical Seals With Antirotation Locks or Positive Drive Devices

I. Etsion, I. Green, 1986 .

Discussion: “The Effects of Surface Roughness and Topography on the Contact Behavior of Elastic Bodies” (Ren, Ning, and Lee, Si C., 1994, ASME J. Tribol., 116, pp. 804–810)

I. Etsion, 1994 .

Closure to “Discussion of ‘Pressure and Squeeze Effects on the Dynamic Characteristics of Elastomer O-Rings Under Small Reciprocating Motion’” (1986, ASME J. Tribol., 108, p. 445)

I. Etsion, I. Green, 1986 .

Discussion: “A Class of Maximum Load Capacity Sector Thrust Bearings” (Gregory, E. W., and Maday, C. J., 1977, ASME J. Lubr. Technol., 99, pp. 180–184)

I. Etsion, 1977 .

Mechanical Face Seal Dynamics Update

I. Etsion, 1985 .

Closure to “Discussion of ‘An Accurate Solution of the Gas Lubricated, Flat Sector Thrust Bearing’” (1977, ASME J. Lubr. Technol., 99, p. 307)

I. Etsion, D. P. Fleming, 1977 .

Leakage-free journal bearings

I. Etsion, O. Pinkus, 1976 .

Optimum Design of Metallic Reciprocating Seals

I. Etsion, 1983 .

Discussion: “Gyroscopic and Support Effects on the Steady-State Response of a Noncontacting Flexibly Mounted Rotor Mechanical Face Seal” (Green, I., 1989, ASME J. Tribol., 111, pp. 200–206)

I. Etsion, 1989 .

Analytical Solution for a Class of Quadrilateral Stepped Slider Bearings

I. Etsion, J. J. Blech, 1984 .

Discussion: “Experimental Studies on Thermoelastic Effects in Hydrodynamically Lubricated Face Seals” (Banerjee, B N., and Burton, R. A., 1979, ASME J. Lubr. Technol., 101, pp. 275–281)

I. Etsion, 1979 .

Experimental Observation of the Dynamic Behavior of Noncontacting Coned-Face Mechanical Seals

I. Etsion, I. Constantinescu, 1984 .

Analysis of an oscillatory oil squeeze film containing a central gas bubble

I. Etsion, Shimon Haber, 1985 .

The Effect of Two-Phase Lubricant on Bearing Performances

I. Etsion, Shimon Haber, M. Shapira, 1987 .

Discussion: “Analysis and Optimization of Semicircular and Straight Lobe Viscous Pumps” (Mainland, M., and Green, I., 1992, ASME J. Tribol., 114, pp. 515–521)

I. Etsion, 1992 .

Closure to “Discussion of ‘A New Concept of Zero-Leakage Noncontacting Mechanical Face Seal’” (1984, ASME J. Tribol., 106, p. 343)

I. Etsion, 1984 .

Hydrodynamic Effects on the Boiling Interface in a Misaligned, Two-Phase, Mechanical Seal—A Qualitative Study

I. Etsion, M. D. Pascovici, 1996 .

The Boiling Interface in a Misaligned Two-Phase Mechanical Seal

I. Etsion, M. D. Pascovici, L. Burstein, 1997 .

Closure to “Discussion of ‘The Boiling Interface in a Misaligned Two-Phase Mechanical Seal’” (1997, ASME J. Tribol., 119, p. 271)

I. Etsion, M. D. Pascovici, L. Burstein, 1997 .

Parametric Study of the Dynamic Performance of Gas Lubricated Ringless Pistons

I. Etsion, K. Gommed, 1994 .

Discussion: “A Face Seal With Circumferential Pumping Grooves and Rayleigh-Steps” (Ikeuchi, K., Mori, H., and Nishida, T., 1988, ASME J. Tribol., 110, pp. 313–317)

I. Etsion, 1988 .

Discussion: “Performance Characteristics of Shrouded Rayleigh-Step and Spiral Groove Viscous Pumps” (Sato, Yuichi, and Knight, J. D., 1992, ASME J. Tribol., 114, pp. 499–503)

I. Etsion, 1992 .

Discussion: “Cavitation in a Short Bearing With Pressurized Lubricant Supply” (Pan, C. H. T., and Ibrahim, R. A., 1981, ASME J. Lubr. Technol., 103, pp. 337–346)

I. Etsion, 1981 .

Discussion: “Stiffness of Straight and Tapered Annular Gas Path Seals” (Fleming, David P., 1979, ASME J. Lubr. Technol., 101, pp. 349–354)

I. Etsion, 1979 .

An accurate solution of the gas lubricated, flat sector thrust bearing

I. Etsion, D. P. Fleming, 1977 .

Erratum: “A Kinematic Model for Mechanical Seals With Antirotation Locks or Positive Drive Devices” (Journal of Tribology, 1986, 108, pp. 42–45)

I. Etsion, I. Green, 1986 .

Mechanical face seal dynamics 1985-1989

I. Etsion, 1991 .

A Laser Surface Textured Hydrostatic Mechanical Seal

I. Etsion, G. Halperin, I. Etsion, 2002 .

Closure to “Discussions of ‘Design Charts for Arbitrarily Pivoted, Liquid-Lubricated, Flat-Sector-Pad Thrust Bearing’” (1978, ASME J. Lubr. Technol., 100, pp. 285–286)

I. Etsion, 1978 .

Elastic–plastic spherical contact under combined normal and tangential loading in full stick

I. Etsion, Victor Brizmer, Yuri Kligerman, 2006 .

The Effect of Elastomer Surface Texturing in Soft Elasto-Hydrodynamic Lubrication

I. Etsion, A. Shinkarenko, Yuri Kligerman, 2009 .

Improved Design With Noncylindrical Profiles of Gas-Lubricated Ringless Pistons

I. Etsion, K. Gommed, 1995 .

A Model for Contact and Static Friction of Nominally Flat Rough Surfaces Under Full Stick Contact Condition

I. Etsion, Yuri Kligerman, I. Etsion, 2008 .

The effect of various surface treatments on piston pin scuffing resistance

I. Etsion, G. Halperin, I. Etsion, 2006 .

Analysis of Short Journal Bearings With New Upstream Boundary Conditions

I. Etsion, O. Pinkus, 1974 .

Dynamic Analysis of Gas Lubricated Reciprocating Ringless Pistons—Basic Modeling

I. Etsion, K. Gommed, I. Etsion, 1993 .

Solutions of Finite Journal Bearings With Incomplete Films

I. Etsion, O. Pinkus, 1975 .

The effect of contact conditions and material properties on the elasticity terminus of a spherical contact

I. Etsion, Victor Brizmer, Yuri Kligerman, 2006 .

Surface texturing for in-cylinder friction reduction

I. Etsion, 2010 .

Observation of Pressure Variation in the Cavitation Region of Submerged Journal Bearings

I. Etsion, L. P. Ludwig, 1982 .

A Hydrostatic Laser Surface Textured Gas Seal

I. Etsion, Yuri Kligerman, Yuri Feldman, 2006 .

UNLOADING OF AN ELASTIC-PLASTIC LOADED SPHERICAL CONTACT

I. Etsion, Yuri Kligerman, I. Etsion, 2005 .

A Thermo-Hydrodynamic Analysis of a Mechanical Face Seal

I. Etsion, M. D. Pascovici, I. Etsion, 1992 .

A rational human joint friction test using a human cartilage-on-cartilage arrangement

I. Etsion, Sarit Sivan, Alice Maroudas, 2006 .

The Effect of Small Normal Loads on the Static Friction Coefficient for Very Smooth Surfaces

I. Etsion, M. Amit, 1993 .

Junction Growth and Energy Dissipation at the Very Early Stage of Elastic-Plastic Spherical Contact Fretting

I. Etsion, Andrey Ovcharenko, I. Etsion, 2009 .

Hydrodynamic Effects in a Misaligned Radial Face Seal

I. Etsion, 1979 .

A Model for Potential Adhesive Wear Particle at Sliding Inception of a Spherical Contact

I. Etsion, Yuri Kligerman, I. Etsion, 2008 .