Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum

[1]  I. Beyerlein,et al.  A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum–tungsten alloys , 2014 .

[2]  C. Weinberger,et al.  Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals , 2014 .

[3]  Shi-feng Liu,et al.  Texture evolution of high purity tantalum under different rolling paths , 2014 .

[4]  Shi-feng Liu,et al.  A comparative study of clock rolling and unidirectional rolling on deformation/recrystallization microstructure and texture of high purity tantalum plates , 2013 .

[5]  Romain Quey,et al.  Grain orientation fragmentation in hot-deformed aluminium: Experiment and simulation , 2012 .

[6]  K. Song,et al.  Microstructure and Texture Development in Pure Ta Sheets Processed by Conventional Rolling and Cross Roll Rolling , 2012 .

[7]  Dejan Stojakovic,et al.  Electron backscatter diffraction in materials characterization , 2012 .

[8]  S. Suwas,et al.  Evolution of texture during equal channel angular extrusion of commercially pure aluminum: Experiments and simulations , 2009 .

[9]  Raul Radovitzky,et al.  An explicit formulation for multiscale modeling of bcc metals , 2008 .

[10]  C. Sommitsch,et al.  Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations , 2006 .

[11]  D. Raabe,et al.  EBSD study of grain subdivision of a Goss grain in coarse-grained cold-rolled niobium , 2005 .

[12]  A. F. Padilha,et al.  Recrystallization of oligocrystalline tantalum deformed by cold rolling , 2005 .

[13]  Abhishek Bhattacharyya,et al.  Detailed analyses of grain–scale plastic deformation in columnar polycrystalline aluminium using orientation image mapping and crystal plasticity models , 2004, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[14]  B. Bacroix,et al.  Estimation of recrystallized volume fraction from EBSD data , 2002 .

[15]  A. F. Padilha,et al.  Orientation effects during grain subdivision and subsequent annealing in coarse-grained tantalum , 2001 .

[16]  Abhishek Bhattacharyya,et al.  Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations , 2001 .

[17]  Q. Liu,et al.  Location-dependent lattice rotation and shear strain in rolled aluminium single crystals of cube and goss orientations , 2000 .

[18]  J. Driver,et al.  Deformation banding mechanisms during plane strain compression of cube-oriented f.c.c. crystals , 2000 .

[19]  B. Duggan,et al.  Deformation banding and nucleation of recrystallisation in if steel , 1999 .

[20]  D. Kuhlmann-wilsdorf.  OVERVIEW No. 131“Regular” deformation bands (DBs) and the LEDS hypothesis , 1999 .

[21]  N. Hansen,et al.  Heterogeneous microstructures and microtextures in cube-oriented al crystals after channel die compression , 1998 .

[22]  S. Nemat-Nasser,et al.  A physically-based constitutive model for BCC crystals with application to polycrystalline tantalum , 1998 .

[23]  B. Duggan,et al.  The Effect of a Deformation Banding Criterion on Simulated b.c.c. Rolling Textures , 1998 .

[24]  Lallit Anand,et al.  Elasto-viscoplastic constitutive equations for polycrystalline metals: Application to tantalum , 1998 .

[25]  C. Maurice,et al.  Hot rolling textures of f.c.c. metals—Part I. Experimental results on Al single and polycrystals , 1997 .

[26]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[27]  D. Raabe,et al.  Textures of Cold Rolled and Annealed Tantalum , 1994 .

[28]  D. Raabe,et al.  Texture and microstructure of rolled and annealed tantalum , 1994 .

[29]  Ricardo A. Lebensohn,et al.  A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals , 1994 .

[30]  Chun‐Sing Lee,et al.  Deformation banding and copper-type rolling textures , 1993 .

[31]  Chun‐Sing Lee,et al.  A theory of deformation banding in cold rolling , 1993 .

[32]  J. B. Clark,et al.  Influence of transverse rolling on the , 1992, Metallurgical and Materials Transactions A.

[33]  C. Vold,et al.  Effect of processing variables on texture and texture gradients in tantalum , 1991 .

[34]  J. F. Butler,et al.  Channel die compression of aluminum single crystals , 1989 .