Drying uniformity analysis of an indirect solar dryer based on computational fluid dynamics and image processing

[1]  Azim Doğuş Tuncer,et al.  Energy-exergy and sustainability analysis of a PV-driven quadruple-flow solar drying system , 2021 .

[2]  N. Abdenouri,et al.  3E analysis and mathematical modelling of garlic drying process in a hybrid solar-electric dryer , 2021 .

[3]  M. R. Elkadeem,et al.  Performance analysis of a modified solar still using reduced graphene oxide coated absorber plate with activated carbon pellet , 2021, Sustainable Energy Technologies and Assessments.

[4]  A. Boubekri,et al.  Economic analysis and drying kinetics of geothermal-assisted solar dryer for tomato paste drying. , 2021, Journal of the science of food and agriculture.

[5]  M. Arıcı,et al.  Multi-objective design optimization of solar air heater for food drying based on energy, exergy and improvement potential , 2021 .

[6]  Azim Doğuş Tuncer,et al.  Thermal performance improvement of an indirect solar dryer with tube-type absorber packed with aluminum wool , 2021 .

[7]  A. Hoang,et al.  Thermal constant analysis of phase change nanocomposites and discussion on selection strategies with respect to economic constraints , 2021 .

[8]  Weilin Zhuge,et al.  Qualitative assessment and global mapping of supercritical CO2 power cycle technology , 2021 .

[9]  Belkhir Negrou,et al.  A high-resolution geographic information system-analytical hierarchy process-based method for solar PV power plant site selection: a case study Algeria , 2020, Clean Technologies and Environmental Policy.

[10]  V. Chandramohan,et al.  Energy and exergy analysis of forced and natural convection indirect solar dryers: Estimation of exergy inflow, outflow, losses, exergy efficiencies and sustainability indicators from drying experiments , 2020 .

[11]  S. Vijayan,et al.  Experimental and thermal performance investigations on sensible storage based solar air heater , 2020 .

[12]  V. Antony Aroul Raj,et al.  CFD studies on different configurations of drying chamber for thin-layer drying of leaves , 2020, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[13]  J. Poveda.  Marchantia polymorpha subsp. ruderalis (Bischl. & Boissel.-Dub.)-arbuscular mycorrhizal fungi interaction: beneficial or harmful? , 2020, Symbiosis.

[14]  Pushpendra Singh,et al.  Review on development, recent advancement and applications of various types of solar dryers , 2020 .

[15]  Ridha Cherraye.  Experimental Investigation of the Effects of Preheating on Still Productivity , 2020 .

[16]  Shiva Kumar,et al.  Review on the design modifications of a solar air heater for improvement in the thermal performance , 2020, Sustainable Energy Technologies and Assessments.

[17]  H. S. Akhijahani,et al.  Thermal analysis of a solar dryer equipped with PTSC and PCM using experimental and numerical methods , 2020 .

[18]  V. Chandramohan,et al.  Performance comparison of thermal energy storage system for indirect solar dryer with and without finned copper tube , 2020 .

[19]  Azim Doğuş Tuncer,et al.  Experimental and CFD survey of indirect solar dryer modified with low-cost iron mesh , 2020 .

[20]  T. V. Arjunan,et al.  Exergo-environmental analysis of an indirect forced convection solar dryer for drying bitter gourd slices , 2020 .

[21]  B. Bouchekima,et al.  The effect of tilt angle on solar still productivity at different seasons in arid conditions (south Algeria) , 2020 .

[22]  V. Meda,et al.  A review on indirect type solar dryers for agricultural crops – Dryer setup, its performance, energy storage and important highlights , 2020 .

[23]  Azim Doğuş Tuncer,et al.  Drying municipal sewage sludge with v-groove triple-pass and quadruple-pass solar air heaters along with testing of a solar absorber drying chamber. , 2019, The Science of the total environment.

[24]  N. Abdenouri,et al.  Simulation, design and experimental performance evaluation of an innovative hybrid solar-gas dryer , 2019 .

[25]  Messaoud Sandali,et al.  Improvement of the Thermal Performance of Solar Drying Systems Using Different Techniques: A Review , 2019, Journal of Solar Energy Engineering.

[26]  M. G. Gebrehiwot,et al.  On the comparison between computational fluid dynamics (CFD) and lumped capacitance modeling for the simulation of transient heat transfer in solar dryers , 2019, Solar Energy.

[27]  Messaoud Sandali,et al.  Improvement of a direct solar dryer performance using a geothermal water heat exchanger as supplementary energetic supply. An experimental investigation and simulation study , 2019, Renewable Energy.

[28]  A. Sharma,et al.  Computational fluid dynamics simulation and energy analysis of domestic direct-type multi-shelf solar dryer , 2019, Journal of Thermal Analysis and Calorimetry.

[29]  Ahmed A. Serageldin,et al.  Solar chimney optimization for enhancing thermal comfort in Egypt: An experimental and numerical study , 2019, Solar Energy.

[30]  M. G. Gebrehiwot,et al.  Design, development and CFD modeling of indirect solar food dryer , 2019, Energy Procedia.

[31]  M. A. Said,et al.  Performance of the one-ended evacuated tubes as medium temperature solar air heaters at low flow rates , 2018, Sustainable Energy Technologies and Assessments.

[32]  V. Raju,et al.  Numerical analysis on solar air collector provided with artificial square shaped roughness for indirect type solar dryer , 2018, Journal of Cleaner Production.

[33]  D. Maier,et al.  CFD simulation of corn drying in a natural convection solar dryer , 2018 .

[34]  A. Heydari,et al.  Experimental analysis and numerical modeling of solar air heater with helical flow path , 2018 .

[35]  S. Abboudi,et al.  Applying CFD for Studying the Dynamic and Thermal Behavior of Solar Chimney Drying System with Reversed Absorber , 2017 .

[36]  S. Abboudi,et al.  Improving the Airflow Distribution Within an Indirect Solar Dryer by Modifications Based on Computational Fluid Dynamics , 2017 .

[37]  Belkhir Settou,et al.  A simulation study of a solar collector using phase change materials for air heating application needs , 2017 .

[38]  T. V. Arjunan,et al.  Mathematical modeling and performance analysis of thin layer drying of bitter gourd in sensible storage based indirect solar dryer , 2016 .

[39]  A. Ghaffari,et al.  Modeling and Improving the Performance of Cabinet Solar Dryer Using Computational Fluid Dynamics , 2015 .

[40]  B. Emadi,et al.  CFD Simulation of Deep-Bed Paddy Drying Process and Performance , 2014 .

[41]  M. Eswaramoorthy,et al.  An Experimental Analysis of a Solar Greenhouse Drier: Computational Fluid Dynamics (CFD) Validation , 2013 .

[42]  A. Zomorodian,et al.  Applying CFD for designing a new fruit cabinet dryer , 2010 .

[43]  Aydın Durmuş,et al.  Energy and exergy analyses of thin layer drying of mulberry in a forced solar dryer , 2010 .

[44]  Ludo Waltman,et al.  Software survey: VOSviewer, a computer program for bibliometric mapping , 2009, Scientometrics.

[45]  H. S. Akhijahani,et al.  CFD modeling and evaluation the performance of a solar cabinet dryer equipped with evacuated tube solar collector and thermal storage system , 2020 .

[46]  M. Potgieter,et al.  Experimental and CFD investigation of a hybrid solar air heater , 2020 .

[47]  A. Mezrhab,et al.  Trays Effect on the Dynamic and Thermal Behavior of an Indirect Solar Dryer Using CFD Method , 2020 .

[48]  M. H. Akbari,et al.  Design a cabinet dryer with two geometric configurations using CFD , 2013, Journal of Food Science and Technology.