A new method to determine the density and water absorption of fine recycled aggregates

The construction industry keeps on demanding huge quantities of natural resources, mainly minerals for mortars and concrete production. The depletion of many quarries and environmental concerns about reducing the dumping of construction and demolition waste in quarries have led to an increase in the procuring and use of recycled aggregates from this type of waste. If they are to be incorporated in concrete and mortars it is essential to know their properties to guarantee the adequate performance of the end products, in both mechanical and durability-related terms. Existing regulated tests were developed for natural aggregates, however, and several problems arise when they are applied to recycled aggregates, especially fine recycled aggregates (FRA). This paper describes the main problems encountered with these tests and proposes an alternative method to determine the density and water absorption of FRA that removes them. The use of sodium hexametaphosphate solutions in the water absorption test has proven to improve its efficiency, minimizing cohesion between particles and helping to release entrained air.

[1]  J. Ayuso,et al.  Limiting properties in the characterisation of mixed recycled aggregates for use in the manufacture of concrete , 2011 .

[2]  K. Rahal.  Mechanical properties of concrete with recycled coarse aggregate , 2007 .

[3]  M.Barra de Oliveira,et al.  The influence of retained moisture in aggregates from recycling on the properties of new hardened concrete , 1996 .

[4]  Valeria Corinaldesi,et al.  Behaviour of cementitious mortars containing different kinds of recycled aggregate , 2009 .

[5]  Valeria Corinaldesi,et al.  Mechanical and elastic behaviour of concretes made of recycled-concrete coarse aggregates , 2010 .

[6]  Chi Ming Tam,et al.  New approach in measuring water absorption of recycled aggregates , 2008 .

[7]  Kenn Jhun Kam,et al.  Influence of the amount of recycled coarse aggregate in concrete design and durability properties , 2011 .

[8]  L. F. Miranda,et al.  CDW recycled aggregate renderings: Part I – Analysis of the effect of materials finer than 75 μm on mortar properties , 2006 .

[9]  A. Al-Harthy,et al.  Cement Stabilization of Reclaimed Asphalt Pavement Aggregate for Road Bases and Subbases , 2002 .

[10]  Mahmoud Solyman,et al.  Classification of recycled sands and their applications as fine aggregates for concrete and bituminous mixtures , 2005 .

[11]  T. Idehara,et al.  MEMOIRS OF THE FACULTY OF ENGINEERING , 1977 .

[12]  Claudio Javier Zega,et al.  Use of recycled fine aggregate in concretes with durable requirements. , 2011, Waste management.

[13]  K. Paustian,et al.  Soil structure and organic matter: I. Distribution of aggregate-size classes and aggregate-associated carbon. , 2000 .

[14]  J. Brito,et al.  Recycled aggregate concrete (RAC) - comparative analysis of existing specifications , 2010 .

[15]  Guk-Rwang Won.  American Society for Testing and Materials , 1987 .

[16]  Anaclet Turatsinze,et al.  Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres , 2005 .

[17]  J. Brito,et al.  Mechanical behaviour of concrete made with fine recycled concrete aggregates , 2007 .

[18]  Takayuki Fumoto,et al.  Influence of Quality of Recycled Fine Aggregate on Properties of Concrete , 1999 .

[19]  J. Khatib,et al.  Properties of concrete incorporating fine recycled aggregate , 2005 .

[20]  S. Esterby.  American Society for Testing and Materials , 2006 .

[21]  A. Katz,et al.  Effect of High Levels of Fines Content on Concrete Properties , 2006 .

[22]  T. Aatheesan,et al.  Geotechnical Properties of Recycled Crushed Brick in Pavement Applications , 2011 .

[23]  K. Sagoe-Crentsil,et al.  Performance of concrete made with commercially produced coarse recycled concrete aggregate , 2001 .

[24]  J. Brito,et al.  Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties , 2011 .

[25]  J. de Brito,et al.  Durability performance of concrete made with fine recycled concrete aggregates , 2010 .

[26]  P. Bowen,et al.  Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment , 2011 .