Validation of mass transfer correlations for CO2 absorption with MEA using pilot data

[1]  J. Plaza,et al.  Modeling CO2 capture with aqueous monoethanolamine , 2003 .

[2]  Geert Versteeg,et al.  ON THE KINETICS BETWEEN CO2 AND ALKANOLAMINES BOTH IN AQUEOUS AND NON-AQUEOUS SOLUTIONS. AN OVERVIEW , 1996 .

[3]  A. F. Seibert,et al.  A dimensionless model for predicting the mass‐transfer area of structured packing , 2011 .

[4]  Hans Hasse,et al.  Sensitivity study for the rate-based simulation of the reactive absorption of CO2 , 2011 .

[5]  L. Spiegel,et al.  Hold-up of mellapak structured packings , 1992 .

[6]  Magne Hillestad,et al.  Selection of model parameter correlations in a rate-based CO2 absorber model aimed for process simulation , 2012 .

[7]  R. Idem,et al.  Kinetics of the reactive absorption of carbon dioxide in high CO2-loaded, concentrated aqueous monoethanolamine solutions , 2003 .

[8]  Hans Hasse,et al.  Post combustion CO2 capture by reactive absorption: Pilot plant description and results of systematic studies with MEA , 2012 .

[9]  Masoud Mofarahi,et al.  Comparison of rate-based and equilibrium-stage models of a packed column for post-combustion CO2 capture using 2-amino-2-methyl-1-propanol (AMP) solution , 2013 .

[10]  J. Plaza,et al.  Modeling of carbon dioxide absorption using aqueous monoethanolamine, piperazine and promoted potassium carbonate , 2012 .

[11]  R. Dugas,et al.  Carbon dioxide absorption, desorption, and diffusion in aqueous piperazine and monoethanolamine , 2009 .

[12]  Steven Pruess,et al.  A rate-based model for the design of gas absorbers for the removal of CO2 and H2S using aqueous solutions of MEA and DEA , 2001 .

[13]  Gary T. Rochelle,et al.  Absorber model for CO2 capture by monoethanolamine - application to CASTOR pilot results , 2009 .

[14]  R. E. Tsai.  Mass transfer area of structured packing , 2010 .

[15]  Tariq Mahmud,et al.  Modelling reactive absorption of CO2 in packed columns for post-combustion carbon capture applications , 2011 .

[16]  Sergio Mussati,et al.  A rate based model of a packed column for CO2 absorption using aqueous monoethanolamine solution , 2012 .

[17]  Chau-Chyun Chen,et al.  New mass-transfer correlations for packed towers , 2012 .

[18]  A. Afacan,et al.  Predicting Mass Transfer in Packed Columns Containing Structured Packings , 2000 .

[19]  Reinhard Billet,et al.  Predicting mass transfer in packed columns , 1993 .

[20]  James R. Fair,et al.  Distillation Columns Containing Structured Packings: A Comprehensive Model for Their Performance. 2. Mass-Transfer Model , 1996 .

[21]  A. Zakeri.  Characterization of packing materials for CO2 absorption , 2011 .

[22]  Alessandro Paglianti,et al.  Liquid-Film Mass-Transfer Coefficient in a Column Equipped with Structured Packings , 1997 .

[23]  S. Asai,et al.  The kinetics of reactions of carbon dioxide with monoethanolamine, diethanolamine and triethanolamine by a rapid mixing method , 1977 .

[24]  Marcus Hilliard,et al.  A predictive thermodynamic model for an aqueous blend of potassium carbonate, piperazine, and monoethanolamine for carbon dioxide capture from flue gas , 2008 .

[25]  Gary T. Rochelle,et al.  Rate-Based Process Modeling Study of CO2 Capture with Aqueous Monoethanolamine Solution , 2009 .

[26]  Xiao Luo.  Experimental and numerical study of carbon dioxide mass transfer and kinetics in amine solutions , 2012 .

[27]  O. Bolland,et al.  The Impact of Design Correlations on Rate-based Modeling of a Large Scale CO2 Capture with MEA☆ , 2013 .

[28]  G. Versteeg,et al.  CO2 capture from power plants. Part I: A parametric study of the technical performance based on monoethanolamine , 2007 .

[29]  L. A. Robbins.  Improve pressure-drop prediction with a new correlation , 1991 .

[30]  Geert Versteeg,et al.  Kinetics of CO2 with primary and secondary amines in aqueous solutions - II. Influence of temperature on zwitterion formation and deprotonation rates , 1992 .

[31]  Ying Zhang,et al.  Thermodynamic modeling for CO2 absorption in aqueous MEA solution with electrolyte NRTL model , 2011 .

[32]  J. A. Rocha,et al.  Design Method for Distillation Columns Filled with Metallic, Ceramic, or Plastic Structured Packings , 1997 .

[33]  A. Paglianti,et al.  Interfacial area of mellapak packing: Absorption of 1,1,1-trichloroethane by Genosorb 300 , 1995 .

[34]  Eugeny Y. Kenig,et al.  On the modelling and simulation of sour gas absorption by aqueous amine solutions , 2003 .

[35]  Axel Meisen,et al.  Predict amine solution properties accurately , 1996 .

[36]  Olav Bolland,et al.  Review of design correlations for CO2 absorption into MEA using structured packings , 2012 .

[37]  Hans-Jörg Bart,et al.  Experimental and CFD Simulation Study for the Wetting of a Structured Packing Element with Liquids , 2006 .

[38]  Ralph H. Weiland,et al.  Density and viscosity of some partially carbonated aqueous alkanolamine solutions and their blends , 1998 .

[39]  Gary T. Rochelle,et al.  Effects of the Temperature Bulge in CO2 Absorption from Flue Gas by Aqueous Monoethanolamine , 2008 .

[40]  James R. Fair,et al.  General model for prediction of pressure drop and capacity of countercurrent gas/liquid packed columns , 1989 .

[41]  James R. Fair,et al.  Mass transfer in gauze packings , 1985 .