Multiphysics simulation of the effect of leaflet thickness inhomogeneity and material anisotropy on the stress-strain distribution on the aortic valve.

This study developed a realistic 3D FSI computational model of the aortic valve using the fixed-grid method, which was eventually employed to investigate the effect of the leaflet thickness inhomogeneity and leaflet mechanical nonlinearity and anisotropy on the simulation results. The leaflet anisotropy and thickness inhomogeneity were found to significantly affect the valve stress-strain distribution. However, their effect on valve dynamics and fluid flow through the valve were minor. Comparison of the simulation results against in-vivo and in-vitro data indicated good agreement between the computational models and experimental data. The study highlighted the importance of simulating multi-physics phenomena (such as fluid flow and structural deformation), regional leaflet thickness inhomogeneity and anisotropic nonlinear mechanical properties, to accurately predict the stress-strain distribution on the natural aortic valve.

[1]  I. Borazjani.  Fluid–structure interaction, immersed boundary-finite element method simulations of bio-prosthetic heart valves , 2013 .

[2]  John Fisher,et al.  Tissue engineering of cardiac valve prostheses II: biomechanical characterization of decellularized porcine aortic heart valves. , 2002, The Journal of heart valve disease.

[3]  Patrick Patrick Anderson,et al.  A combined fictitious domain/adaptive meshing method for fluid–structure interaction in heart valves , 2004 .

[4]  F P T Baaijens,et al.  A three-dimensional computational analysis of fluid-structure interaction in the aortic valve. , 2003, Journal of biomechanics.

[5]  Nicolas Aquelet,et al.  Euler–Lagrange coupling with damping effects: Application to slamming problems , 2006 .

[6]  A. Redaelli,et al.  Dynamic finite element analysis of the aortic root from MRI-derived parameters. , 2010, Medical engineering & physics.

[7]  Karyn S Kunzelman,et al.  A coupled fluid-structure finite element model of the aortic valve and root. , 2003, The Journal of heart valve disease.

[8]  Y. Fung,et al.  Pseudoelasticity of arteries and the choice of its mathematical expression. , 1979, The American journal of physiology.

[9]  M. Sacks,et al.  Biaxial mechanical response of bioprosthetic heart valve biomaterials to high in-plane shear. , 2003, Journal of biomechanical engineering.

[10]  Frank P T Baaijens,et al.  Modeling the mechanics of tissue-engineered human heart valve leaflets. , 2007, Journal of biomechanics.

[11]  W. M. Swanson,et al.  Dimensions and Geometric Relationships of the Human Aortic Value as a Function of Pressure , 1974, Circulation research.

[12]  J. Fisher,et al.  Computational simulation of oxygen diffusion in aortic valve leaflet for tissue engineering applications. , 2008, The Journal of heart valve disease.

[13]  M. S. Hamid,et al.  Influence of stent height upon stresses on the cusps of closed bioprosthetic valves. , 1986, Journal of biomechanics.

[14]  Hadi Mohammadi,et al.  Advanced modeling strategy for the analysis of heart valve leaflet tissue mechanics using high-order finite element method. , 2009, Medical engineering & physics.

[15]  Jan Vierendeels,et al.  Comparison of the hemodynamic and thrombogenic performance of two bileaflet mechanical heart valves using a CFD/FSI model. , 2007, Journal of biomechanical engineering.

[16]  L. Talbot,et al.  A fluid-mechanical study of the closure of heart valves , 1979, Journal of Fluid Mechanics.

[17]  A. McCulloch,et al.  Passive material properties of intact ventricular myocardium determined from a cylindrical model. , 1991, Journal of biomechanical engineering.

[18]  J A Weiss,et al.  Finite element implementation of anisotropic quasi-linear viscoelasticity using a discrete spectrum approximation. , 1998, Journal of biomechanical engineering.

[19]  M. Souli,et al.  ALE formulation for fluid–structure interaction problems , 2000 .

[20]  Boyce E. Griffith,et al.  Simulating the fluid dynamics of natural and prosthetic heart valves using the immersed boundary method , 2009 .

[21]  Phillip L. Gould,et al.  Mathematical modelling of human aortic valve leaflets , 1976 .

[22]  Jia Lu,et al.  Fluid–structure interaction methods in biological flows with special emphasis on heart valve dynamics , 2010 .

[23]  R E Clark,et al.  Stress analysis of aortic valve leaflets with smoothed geometrical data. , 1977, Journal of biomechanics.

[24]  L. Talbot,et al.  The fluid mechanics of the aortic valve , 1969, Journal of Fluid Mechanics.

[25]  M. Thubrikar.  The Aortic Valve , 1990 .

[26]  Govinda Balan Kalyana Sundaram,et al.  Aortic valve dynamics using a fluid structure interaction model--The physiology of opening and closing. , 2015, Journal of biomechanics.

[27]  J. Weiss,et al.  Finite element implementation of incompressible, transversely isotropic hyperelasticity , 1996 .

[28]  J. Li,et al.  Geometrical stress-reducing factors in the anisotropic porcine heart valves. , 2003, Journal of biomechanical engineering.

[29]  Jia Lu,et al.  Dynamic simulation pericardial bioprosthetic heart valve function. , 2006, Journal of biomechanical engineering.

[30]  Adrian Ranga,et al.  Computational simulations of the aortic valve validated by imaging data: evaluation of valve-sparing techniques. , 2006, Interactive cardiovascular and thoracic surgery.

[31]  I. C. Howard,et al.  A comparative study of linear and nonlinear simulations of the leaflets in a bioprosthetic heart valve during the cardiac cycle. , 1996, Journal of medical engineering & technology.

[32]  R De Paulis,et al.  Opening and closing characteristics of the aortic valve after valve-sparing procedures using a new aortic root conduit. , 2001, The Annals of thoracic surgery.

[33]  I. C. Howard,et al.  Influence of anisotropy on the mechanical behaviour of bioprosthetic heart valves. , 1999, Journal of medical engineering & technology.

[34]  Krishnan B. Chandran,et al.  Flow Interactions with Cells and Tissues: Cardiovascular Flows and Fluid–Structure Interactions , 2010, Annals of Biomedical Engineering.

[35]  B. Bellhouse,et al.  Mechanism of Closure of the Aortic Valve , 1968, Nature.

[36]  Valérie Deplano,et al.  Validation of a numerical 3-D fluid-structure interaction model for a prosthetic valve based on experimental PIV measurements. , 2009, Medical engineering & physics.

[37]  Carsten J. Beller,et al.  Subject-specific finite-element modeling of normal aortic valve biomechanics from 3D+t TEE images , 2015, Medical Image Anal..

[38]  Michel R Labrosse,et al.  Structural analysis of the natural aortic valve in dynamics: from unpressurized to physiologically loaded. , 2010, Journal of biomechanics.

[39]  K. J. Grande,et al.  Stress Variations in the Human Aortic Root and Valve: The Role of Anatomic Asymmetry , 1998, Annals of Biomedical Engineering.

[40]  Umberto Morbiducci,et al.  Numerical simulation of the dynamics of a bileaflet prosthetic heart valve using a fluid-structure interaction approach. , 2008, Journal of biomechanics.

[41]  Michael S Sacks,et al.  On the biaxial mechanical properties of the layers of the aortic valve leaflet. , 2005, Journal of biomechanical engineering.

[42]  Eli J Weinberg,et al.  Transient, Three-dimensional, Multiscale Simulations of the Human Aortic Valve , 2007, Cardiovascular engineering.

[43]  Hee Sun Kim,et al.  Nonlinear multi-scale anisotropic material and structural models for prosthetic and native aortic heart valves , 2009 .

[44]  I. C. Howard,et al.  A three-dimensional analysis of a bioprosthetic heart valve. , 1991, Journal of biomechanics.

[45]  Komarakshi R Balakrishnan,et al.  Dynamic analysis of the aortic valve using a finite element model. , 2002, The Annals of thoracic surgery.

[46]  van Aa Anton Steenhoven,et al.  Model studies of the closing behaviour of the aortic valve , 1979, Journal of Fluid Mechanics.

[47]  Charles S. Peskin,et al.  Flow patterns around heart valves: a digital computer method for solving the equations of motion , 1973 .

[48]  I. C. Howard,et al.  An approach to the simulation of fluid-structure interaction in the aortic valve. , 2006, Journal of biomechanics.

[49]  Patricia V. Lawford,et al.  Analysis of a mechanical heart valve prosthesis and a native venous valve: Two distinct applications of FSI to biomedical applications , 2010 .

[50]  R. van Loon,et al.  Towards computational modelling of aortic stenosis , 2010 .

[51]  X. Luo,et al.  A nonlinear anisotropic model for porcine aortic heart valves. , 2001, Journal of biomechanics.

[52]  J. Levick,et al.  An Introduction to Cardiovascular Physiology , 2009 .