Equivalent plate structural modeling for wing shape optimization including transverse shear

A new technique for structural modeling of airplane wings is presented taking transverse shear effects into account. The kinematic assumptions of first-order shear deformation plate theory in combination with numerical analysis, where simple polynomials are used to define geometry, construction, and displacement approximations, lead to analytical expressions for elements of the stiffness and mass matrices and load vector. Contributions from the cover skins, spar and rib caps, and spar and rib webs are included as well as concentrated springs and concentrated masses. Limitations of wing modeling techniques based on classical plate theory are discussed, and the improved accuracy of the new equivalent plate technique is demonstrated through comparison with finite element analysis and test results. Expressions for analytical derivatives of stiffness, mass, and load terms with respect to wing shape are given. Based on these, it is possible to obtain analytic sensitivities of displacements , stresses, and natural frequencies with respect to planform shape and depth distribution. This makes the new capability an effective structural tool for wing shape optimization.

[1]  L. A. Mccullers,et al.  AUTOMATED DESIGN OF ADVANCED COMPOSITE STRUCTURES , 1974 .

[2]  Gary L. Giles.  Further Generalization of an Equivalent Plate Representation for Aircraft Structural Analysis , 1989 .

[3]  Kwan J. Chang,et al.  Sensitivity-based scaling for correlating structural response from different analytical models , 1991 .

[4]  R. D. Gibson.  Theory and problems of heat transfer, (schaum's outline series): McGraw-Hill, New York (1978) , 1979 .

[5]  G. Lecina,et al.  Advances in optimal design with composite materials , 1987 .

[6]  I. Lottati,et al.  Flutter and divergence aeroelastic characteristics for composite forward swept cantilevered wing , 1985 .

[7]  J. Reddy.  Energy and variational methods in applied mechanics : with an introduction to the finite element method , 1984 .

[8]  L. Librescu,et al.  General formulation for the aeroelastic divergence of composite swept-forward wing structures , 1988 .

[9]  E. Livne,et al.  Aeroservoelastic aspects of wing/control surface planform shape optimization , 1995 .

[10]  Pi-Jen Kao,et al.  Coupled Rayleigh-Ritz/finite element structural analysis using penalty function method , 1992 .

[11]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[12]  Eli Livne,et al.  Analytic Sensitivity and Approximation of Skin Buckling Constraints in Wing-Shape Synthesis , 1995 .

[13]  C. Hong,et al.  Bending of tapered anisotropic sandwich plates with arbitrary edge conditions , 1992 .

[14]  Alfred G. Striz,et al.  Influence of Structural and Aerodynamic Modeling on Flutter Analysis , 1994 .

[15]  William E. Triplett.  Aeroelastic Tailoring Studies in Fighter Aircraft Design , 1980 .

[16]  Eli Livne,et al.  Analytic sensitivities for shape optimization in equivalent plate structural wing models , 1994 .

[17]  Gary L. Giles,et al.  Equivalent plate analysis of aircraft wing box structures with general planform geometry , 1986 .