3D printing from MRI Data: Harnessing strengths and minimizing weaknesses
暂无分享,去创建一个
Tatiana Kelil | Dmitry Levin | Beth Ripley | Joshua L Hermsen | Sooah Kim | Jeffrey H Maki | Gregory J Wilson | Tatiana Kelil | Beth Ripley | Sooah Kim | J. Hermsen | G. Wilson | J. Maki | Dmitry B Levin
[1] S. Garekar,et al. Clinical Application and Multidisciplinary Assessment of Three Dimensional Printing in Double Outlet Right Ventricle With Remote Ventricular Septal Defect , 2016, World journal for pediatric & congenital heart surgery.
[2] Simon K. Warfield,et al. Robust Super-Resolution Volume Reconstruction From Slice Acquisitions: Application to Fetal Brain MRI , 2010, IEEE Transactions on Medical Imaging.
[3] Jean M Peck,et al. The development of a low-cost three-dimensional printed shoulder, arm, and hand prostheses for children , 2017, Prosthetics and orthotics international.
[4] Benjamin R. Lee,et al. Three-dimensional printing of surgical anatomy , 2016, Current opinion in urology.
[5] Q. Lan,et al. Development of Three-Dimensional Printed Craniocerebral Models for Simulated Neurosurgery. , 2016, World neurosurgery.
[6] C. Solares,et al. A Novel Temporal Bone Simulation Model Using 3D Printing Techniques , 2015, Otology & neurotology : official publication of the American Otological Society, American Neurotology Society [and] European Academy of Otology and Neurotology.
[7] Scott J. Hollister,et al. Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients , 2015, Science Translational Medicine.
[8] Erik-Jan Rijkhorst,et al. The accuracy of ultrashort echo time MRI sequences for medical additive manufacturing. , 2016, Dento maxillo facial radiology.
[9] Marc E. Nelson,et al. Bioresorbable airway splint created with a three-dimensional printer. , 2013, The New England journal of medicine.
[10] Peter Kessler,et al. Additive manufacturing for microvascular reconstruction of the mandible in 20 patients. , 2012, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[11] M. Biase,et al. Left Atrial Appendage Closure Guided by 3D Printed Cardiac Reconstruction: Emerging Directions and Future Trends , 2016, Journal of cardiovascular electrophysiology.
[12] Beat Schmutz,et al. Quantification of the accuracy of MRI generated 3D models of long bones compared to CT generated 3D models. , 2012, Medical engineering & physics.
[13] Medical biomodelling in surgical applications: results of a multicentric European validation of 466 cases. , 2003, Studies in health technology and informatics.
[14] Michael M. Maddox,et al. Individualized Physical 3-dimensional Kidney Tumor Models Constructed From 3-dimensional Printers Result in Improved Trainee Anatomic Understanding. , 2015, Urology.
[15] Kanwal M. Farooqi,et al. 3D Printing to Guide Ventricular Assist Device Placement in Adults With Congenital Heart Disease and Heart Failure. , 2016, JACC. Heart failure.
[16] Hidenori Ono,et al. Rapid prototyping of temporal bone for surgical training and medical education. , 2004, Acta oto-laryngologica.
[17] Sungheon Kim,et al. Golden‐angle radial sparse parallel MRI: Combination of compressed sensing, parallel imaging, and golden‐angle radial sampling for fast and flexible dynamic volumetric MRI , 2014, Magnetic resonance in medicine.
[18] S. Patel,et al. A novel method for soft tissue retraction during periapical surgery using 3D technology: a case report , 2017, International endodontic journal.
[19] F. Rybicki,et al. 3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement. , 2016, Journal of cardiovascular computed tomography.
[20] Debiao Li,et al. Coronary arteries at 3.0 T: Contrast‐enhanced magnetization‐prepared three‐dimensional breathhold MR angiography , 2005, Journal of magnetic resonance imaging : JMRI.
[21] J. Leong,et al. Design and fabrication of 3D-printed anatomically shaped lumbar cage for intervertebral disc (IVD) degeneration treatment , 2016, Biofabrication.
[22] S. Seslar,et al. Scan, plan, print, practice, perform: Development and use of a patient‐specific 3‐dimensional printed model in adult cardiac surgery , 2017, The Journal of thoracic and cardiovascular surgery.
[23] Yu Zhang,et al. 3D-printed guiding templates for improved osteosarcoma resection , 2016, Scientific Reports.
[24] G. Biglino,et al. Rapid prototyping compliant arterial phantoms for in-vitro studies and device testing , 2013, Journal of Cardiovascular Magnetic Resonance.
[25] Gonzalo Varela,et al. Tridimensional titanium-printed custom-made prosthesis for sternocostal reconstruction. , 2015, European journal of cardio-thoracic surgery : official journal of the European Association for Cardio-thoracic Surgery.
[26] Sanjay P. Prabhu,et al. Antenatal Three-Dimensional Printing of Aberrant Facial Anatomy , 2015, Pediatrics.
[27] Raju Thomas,et al. Physical models of renal malignancies using standard cross-sectional imaging and 3-dimensional printers: a pilot study. , 2014, Urology.
[28] Kari Tanderup,et al. Individualised 3D printed vaginal template for MRI guided brachytherapy in locally advanced cervical cancer. , 2016, Radiotherapy and oncology : journal of the European Society for Therapeutic Radiology and Oncology.
[29] Heron Werner,et al. Physical model from 3D ultrasound and magnetic resonance imaging scan data reconstruction of lumbosacral myelomeningocele in a fetus with Chiari II malformation , 2015, Child's Nervous System.
[30] F. Rybicki,et al. Medical 3D Printing for the Radiologist. , 2015, Radiographics : a review publication of the Radiological Society of North America, Inc.
[31] B. Baek,et al. Superior Branch Palsy of the Oculomotor Nerve Caused by Frontal Sinusitis. , 2016, The Journal of craniofacial surgery (Print).
[32] Marija Vukicevic,et al. 3D Printed Modeling of the Mitral Valve for Catheter-Based Structural Interventions , 2017, Annals of Biomedical Engineering.
[33] K. Mori,et al. Surgical Simulation of Extradural Anterior Clinoidectomy through the Trans-superior Orbital Fissure Approach Using a Dissectable Three-dimensional Skull Base Model with Artificial Cavernous Sinus. , 2010, Skull base : official journal of North American Skull Base Society ... [et al.].
[34] R. S. Hinks,et al. A multispectral three‐dimensional acquisition technique for imaging near metal implants , 2009, Magnetic resonance in medicine.
[35] John M Pauly,et al. Metal-induced artifacts in MRI. , 2011, AJR. American journal of roentgenology.
[36] O. Emodi,et al. Three-dimensional planning and printing of guides and templates for reconstruction of the mandibular ramus and condyle using autogenous costochondral grafts. , 2017, The British journal of oral & maxillofacial surgery.
[37] B. Seedhom,et al. Accuracy of MRI vs CT imaging with particular reference to patient specific templates for total knee replacement surgery , 2008, The international journal of medical robotics + computer assisted surgery : MRCAS.
[38] Xiaofei Li,et al. Three-dimensional printing titanium ribs for complex reconstruction after extensive posterolateral chest wall resection in lung cancer. , 2016, The Journal of thoracic and cardiovascular surgery.
[39] J. Leijten,et al. Organ Engineering : Design , Technology , and Integration , 2016 .
[40] W. Nitz,et al. MP RAGE: a three-dimensional, T1-weighted, gradient-echo sequence--initial experience in the brain. , 1992, Radiology.
[41] D.J. van den Heever,et al. Preoperative Three-Dimensional Model Creation of Magnetic Resonance Brain Images as a Tool to Assist Neurosurgical Planning , 2013, Stereotactic and Functional Neurosurgery.
[42] Stephan E Maier,et al. Three‐dimensional printing of MRI‐visible phantoms and MR image‐guided therapy simulation , 2017, Magnetic resonance in medicine.
[43] Huifang Zhou,et al. Recent advances in bioprinting techniques: approaches, applications and future prospects , 2016, Journal of Translational Medicine.
[44] Shuai Leng,et al. Three-dimensional Physical Modeling: Applications and Experience at Mayo Clinic. , 2015, Radiographics : a review publication of the Radiological Society of North America, Inc.
[45] John M Pauly,et al. SEMAC: Slice encoding for metal artifact correction in MRI , 2009, Magnetic resonance in medicine.
[46] Yanzhao Ma,et al. Use of rapid prototyping drill template for the expansive open door laminoplasty: A cadaveric study , 2016, Clinical Neurology and Neurosurgery.
[47] Raj Satkunasivam,et al. Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education , 2016, World Journal of Urology.
[48] Shin-Hyuk Kang,et al. Customized Cranioplasty Implants Using Three-Dimensional Printers and Polymethyl-Methacrylate Casting , 2012, Journal of Korean Neurosurgical Society.
[49] I. Valverde,et al. A systematic review of image segmentation methodology, used in the additive manufacture of patient-specific 3D printed models of the cardiovascular system , 2016, JRSM cardiovascular disease.
[50] R. Shayan,et al. Adipose-Derived Stem Cells in Radiotherapy Injury: A New Frontier , 2014, Front. Surg..
[51] Jianyi Li,et al. Do 3D Printing Models Improve Anatomical Teaching About Hepatic Segments to Medical Students? A Randomized Controlled Study , 2016, World Journal of Surgery.
[52] Jos Vander Sloten,et al. Segmentation accuracy of long bones. , 2014, Medical engineering & physics.
[53] Moongu Jeon,et al. Anatomical evaluation of CT-MRI combined femoral model , 2008, Biomedical engineering online.
[54] Alastair J. Martin,et al. Whole‐heart steady‐state free precession coronary artery magnetic resonance angiography , 2003, Magnetic resonance in medicine.
[55] F. Migliavacca,et al. Percutaneous pulmonary valve implantation based on rapid prototyping of right ventricular outflow tract and pulmonary trunk from MR data. , 2007, Radiology.
[56] Uwe Gbureck,et al. Multi-directional Le Fort III midfacial distraction using an individual prefabricated device. , 2009, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.
[57] Adir Cohen,et al. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. , 2009, Oral surgery, oral medicine, oral pathology, oral radiology, and endodontics.
[58] Yi-xiong Zheng,et al. 3D Printout Models vs. 3D-Rendered Images: Which Is Better for Preoperative Planning? , 2016, Journal of surgical education.
[59] Bulent Sacak,et al. Use of Rapid Prototyping in Prosthetic Auricular Restoration , 2009, The Journal of craniofacial surgery (Print).
[60] Shyam Natarajan,et al. A system for evaluating magnetic resonance imaging of prostate cancer using patient-specific 3D printed molds. , 2014, American journal of clinical and experimental urology.
[61] H Jara,et al. Motion artifact control in body MR imaging. , 1999, Magnetic resonance imaging clinics of North America.
[62] Deming Wang,et al. Geometric distortion in clinical MRI systems Part II: correction using a 3D phantom. , 2004, Magnetic resonance imaging.
[63] S. Hollister,et al. Regulatory Considerations in the Design and Manufacturing of Implantable 3D‐Printed Medical Devices , 2015, Clinical and translational science.
[64] A. Kane,et al. Liquid Latex Molding: A Novel Application of 3D Printing to Facilitate Flap Design , 2017, The Cleft palate-craniofacial journal : official publication of the American Cleft Palate-Craniofacial Association.
[65] Kanwal M. Farooqi,et al. Blood Pool Segmentation Results in Superior Virtual Cardiac Models than Myocardial Segmentation for 3D Printing , 2016, Pediatric Cardiology.
[66] Mika Salmi,et al. Imaging requirements for medical applications of additive manufacturing , 2014, Acta radiologica.
[67] F. Tomasello,et al. 3D-Printing of Arteriovenous Malformations for Radiosurgical Treatment: Pushing Anatomy Understanding to Real Boundaries , 2016, Cureus.
[68] Paul G. McMenamin,et al. Emerging Applications of Bedside 3D Printing in Plastic Surgery , 2015, Front. Surg..