Numerical Studies on Heat Release Rate in Room Fire on Liquid Fuel under Different Ventilation Factors

Heat release rate (HRR) of the design fire is the most important parameter in assessing building fire hazards. However, HRR in room fire was only studied by computational fluid dynamics (CFD) in most of the projects determining fire safety provisions by performance-based design. In contrast to ten years ago, officers in the Far East are now having better knowledge of CFD. Two common questions are raised on CFD-predicted results on describing free boundaries; and on computing grid size. In this work, predicting HRR by the CFD model was justified with experimental room pool fire data reported earlier. The software fire dynamics simulator (FDS) version 5 was selected as the CFD simulation tool. Prescribed input heating rate based on the experimental results was used with the liquid fuel model in FDS. Five different free boundary conditions were investigated to predict HRR. Grid sensitivity study was carried out using one stretched mesh and multiple uniform meshes with different grid sizes. As it is difficult to have the entire set of CFD predicted results agreed with experiments, macroscopic flow parameters on the mass flow rate through door opening predicted by CFD were also justified by another four conditions with different ventilation factors.

[1]  Wan Ki Chow,et al.  Building Fire Simulation with a Field Model Based on Large Eddy Simulation , 2002 .

[2]  Wan Ki Chow.  On the "Cabins" Fire Safety Design Concept in the New Hong Kong Airport Terminal Buildings , 1997 .

[3]  David W. Stroup,et al.  Flammability Hazard of Materials , 2008 .

[4]  Wan Ki Chow,et al.  FULL-SCALE BURNING TESTS ON HEAT RELEASE RATE OF GASOLINE FIRE WITH WATER MIST , 2002 .

[5]  Kevin B. McGrattan,et al.  Fire Dynamics Simulator (Version 5): User's Guide , 2007 .

[6]  Khalid Moinuddin,et al.  The Effect of Fuel Quantity and Location on Small Enclosure Fires , 2007 .

[7]  R. B. Williamson,et al.  Post‐flashover compartment fires: Basis of a theoretical model , 1978 .

[8]  Edwin R. Galea,et al.  The mathematical modelling and computer simulation of fire development in aircraft , 1991 .

[9]  Wan Ki Chow,et al.  A brief review on applying computational fluid dynamics in building fire hazard assessment , 2009 .

[10]  J. Hietaniemi,et al.  FDS simulation of fire spread - comparison of model results with experimental data , 2004 .

[11]  W. Chow,et al.  Numerical simulation of pressure changes in closed chamber fires , 2009 .

[12]  Wan Ki Chow,et al.  Simulating Smoke Filling in Big Halls by Computational Fluid Dynamics , 2011 .

[13]  J. Quintiere.  Principles of Fire Behavior , 1997 .

[14]  H. Baum,et al.  Large eddy simulations of smoke movement , 1998 .

[15]  Kevin B. McGrattan,et al.  Fire dynamics simulator (ver-sion 3) technical reference guide , 2001 .

[16]  William D. Davis,et al.  Quantifying fire model evaluation using functional analysis , 1999 .

[17]  Wan Ki Chow,et al.  Evaluation of the Field Model, Fire Dynamics Simulator, for a Specific Experimental Scenario: , 2005 .

[18]  Cheuk Lun Chow,et al.  AIR FLOW RATE ACROSS VERTICAL OPENING INDUCED BY ROOM HEAT SOURCES , 2011 .

[19]  Glenn P. Forney,et al.  Fire Dynamics Simulator (Version 2) -- Technical Reference Guide | NIST , 2001 .

[20]  N. C. Markatos,et al.  Mathematical modelling of buoyancy-induced smoke flow in enclosures , 1982 .

[21]  K. V. Maele,et al.  Numerical simulations of full-scale enclosure fires in a small compartment with natural roof ventilation , 2008 .

[22]  Richard D. Peacock,et al.  Heat release rate: The single most important variable in fire hazard☆ , 1990 .

[23]  J. C. Jones.  COMMENT ON FIRE LOAD DENSITIES , 2011 .

[24]  Wan Ki Chow,et al.  Experimental Studies on Minimum Heat Release Rates for Flashover with Oxygen Consumption Calorimetry , 2003 .

[25]  John H. Klote,et al.  Computer modeling for smoke control design , 1985 .