Universal MEMS platforms for passive RF components: suspended inductors and variable capacitors

We propose a universal MEMS technology platform for fabricating integrable passive components for radio frequency (RF) integrated circuits. This platform is based on a novel surface-micromachined Micro-Elevator by Self-Assembly (MESA) technique. Both high-Q inductors and variable capacitors can be realized by the MESA technology. A surface-micromachined spiral inductor that is raised by 250 /spl mu/m above the Si substrate has been experimentally demonstrated. The suspended inductor has less parasitic capacitance and substrate loss, and higher quality (Q) value and resonant frequency. The inductance of a 12.5-turn inductor is measured to be 24 nH. The results show that the self-assembled passive RF elements are suitable for monolithic integration.

[1]  R. Meyer,et al.  Si IC-compatible inductors and LC passive filters , 1990 .

[2]  A. Abidi,et al.  Large suspended inductors on silicon and their use in a 2- mu m CMOS RF amplifier , 1993, IEEE Electron Device Letters.

[3]  M. Kimura,et al.  Characteristics and simulations of the planar multi-layer spiral coil and the miniature opto-electric transformer , 1993 .

[4]  A. Abidi,et al.  Inductors on Silicon and Their Use in a 2-pm CMOS RF Amplifier , 1993 .

[5]  Charles R. Sullivan,et al.  Microfabrication of transformers and inductors for high frequency power conversion , 1993, Proceedings of IEEE Power Electronics Specialist Conference - PESC '93.

[6]  Mark G. Allen,et al.  A comparison of two micromachined inductors (bar-type and meander-type) for fully integrated boost DC/DC power converters , 1994, Proceedings of 1994 IEEE Applied Power Electronics Conference and Exposition - ASPEC'94.

[7]  N. C. MacDonald,et al.  SCREAM I: A single mask, single-crystal silicon, reactive ion etching process for microelectromechanical structures , 1994 .

[8]  Chen-Yu Chi,et al.  Planar microwave and millimeter-wave lumped elements and coupled-line filters using micro-machining techniques , 1995 .

[9]  N. C. MacDonald,et al.  Tunable, micromachined parallel-plate transmission lines , 1995, Proceedings IEEE/Cornell Conference on Advanced Concepts in High Speed Semiconductor Devices and Circuits.

[10]  H. Fujita,et al.  A quantitative analysis of Scratch Drive Actuator using buckling motion , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[11]  M. Allen,et al.  A comparison of micromachined inductors with different magnetic core materials , 1996, 1996 Proceedings 46th Electronic Components and Technology Conference.

[12]  R. Baets,et al.  Suspended membrane inductors and capacitors for application in silicon MMIC's , 1996, IEEE 1996 Microwave and Millimeter-Wave Monolithic Circuits Symposium. Digest of Papers.

[13]  D. Hisamoto,et al.  Silicon RF devices fabricated by ULSI processes featuring 0.1-/spl mu/m SOI-CMOS and suspended inductors , 1996, 1996 Symposium on VLSI Technology. Digest of Technical Papers.

[14]  Mark G. Allen,et al.  A comparison of two micromachined inductors (bar- and meander-type) for fully integrated boost DC/DC , 1996 .

[15]  Li Fan,et al.  Self-assembled microactuated XYZ stages for optical scanning and alignment , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[16]  George M. Whitesides,et al.  Constructing single- and multiple-helical microcoils and characterizing their performance as components of microinductors and microelectromagnets , 1997 .

[17]  D. Sadler,et al.  Micromachined Semi-encapsulated Spiral Inductors For Microelectromechanical Systems (MEMS) Applications , 1997, 1997 IEEE International Magnetics Conference (INTERMAG'97).

[18]  J.A. Von Arx,et al.  On-chip coils with integrated cores for remote inductive powering of integrated microsystems , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).