Effect of tensile residual stresses on fatigue crack growth and S–N curves in tubular joints loaded in compression

The influence of welding tensile residual stresses on fatigue crack growth in bridge tubular K-joints is investigated through experimental testing of large-scale specimens. Crack development is monitored using the alternating current potential drop method. Crack shape, propagation rate, and the stress intensity factors, are analyzed based on measurements. Current CIDECT design guidelines devoted to K-joints recommend to use the fatigue strength S-N curve category 114. Based on experimental investigations, this category is shown to overestimate the fatigue life of bridge K-joints presenting a low chord slenderness gamma value (gamma < 12). CIDECT guidelines also neglect fatigue from compressive loading; however, the fatigue test results prove that cracks propagate up to a critical size for details loaded in compression. The detail category 100 is proposed to design bridge K-joints loaded in tension or compression.

[1]  Ian F. C. Smith,et al.  Defects and crack shape development in fillet welded joints , 1982 .

[2]  Alain Nussbaumer,et al.  Influence of welding residual stresses on stable crack growth in tubular K-joints under compressive fatigue loadings , 2010 .

[3]  R. A Ainsworth,et al.  Incorporation of residual stresses into the SINTAP defect assessment procedure , 2000 .

[4]  P. J. Bouchard,et al.  Validated residual stress profiles for fracture assessments of stainless steel pipe girth welds , 2007 .

[5]  Xiao Ling Zhao,et al.  Fatigue design procedure for welded hollow section joints , 2000 .

[6]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[7]  Claire Acevedo,et al.  Influence of Residual Stresses on Fatigue Response of Welded Tubular K-Joints , 2011 .

[8]  Alain Nussbaumer,et al.  Experimental study on the fatigue behaviour of welded tubular K-joints for bridges , 2006 .

[9]  F. M. Burdekin,et al.  Engineering critical analyses to BS 7910 — the UK guide on methods for assessing the acceptability of flaws in metallic structures , 2000 .

[10]  Alain Nussbaumer,et al.  Experimental determination of stress intensity factors on large-scale tubular trusses fatigue tests , 2008 .

[11]  W. D. Dover,et al.  THE MEASUREMENT OF SURFACE BREAKING CRACKS BY THE ELECTRICAL SYSTEMS ACPD/ACFM , 1994 .

[12]  Alain Nussbaumer,et al.  Fatigue design of bridges with welded circular hollow sections , 2003 .

[13]  Christoffer Astrup,et al.  Fatigue of Welded Structures , 2009 .

[14]  T R Gurney.  THE INFLUENCE OF THICKNESS ON FATIGUE OF WELDED JOINTS - 10 YEARS ON (A REVIEW OF BRITISH WORK) , 1989 .

[15]  Zuheir Barsoum.  Fatigue Assessment of Cruciform Joints Welded with Different Methods , 2005 .