Transient heat transfer and crust evolution during debris bed melting process in the hypothetical severe accident of HPR1000

[1]  Gen Li,et al.  An axisymmetric multiphase moving particle semi-implicit method for simulation of 3D axisymmetric flow , 2022, Progress in Nuclear Energy.

[2]  Gen Li,et al.  Numerical study of hydraulic fragmentation of melt jet in coolant: Breakup length and melt-coolant contact area , 2022, Progress in Nuclear Energy.

[3]  Gen Li,et al.  Numerical study on melt drop collision and hydraulic fragmentation during FCI of a nuclear reactor severe accident , 2020 .

[4]  Gen Li,et al.  A review on MPS method developments and applications in nuclear engineering , 2020 .

[5]  Jun Zhang,et al.  2D MPS analysis of hydrodynamic fine fragmentation of melt drop with initial steam film during fuel–coolant interaction , 2020 .

[6]  Jun Zhang,et al.  Study on melt stratification and migration in debris bed using the moving particle semi-implicit method , 2020 .

[7]  L. Pan,et al.  Large eddy simulation for the thermal behavior of one-layer and two-layer corium pool configurations in HPR1000 reactor , 2018, Applied Thermal Engineering.

[8]  G. Su,et al.  COPRA experiment and numerical research on the behavior of internally-heated melt pool with eutectic salt , 2018, Applied Thermal Engineering.

[9]  F. Duan,et al.  Non-uniform heat transfer suppression to enhance PCM melting by angled fins , 2018 .

[10]  N. Kharoua,et al.  LES study of the combined effects of groups of vortices generated by a pulsating turbulent plane jet impinging on a semi-cylinder , 2017 .

[11]  B. Sehgal,et al.  In-Vessel Melt Retention of Pressurized Water Reactors: Historical Review and Future Research Needs , 2016 .

[12]  Marc Barrachin,et al.  Late phase fuel degradation in the Phébus FP tests , 2013 .

[13]  Pavel Kudinov,et al.  An approach to numerical simulation and analysis of molten corium coolability in a boiling water reactor lower head , 2010 .

[14]  Chi-Thanh Tran,et al.  SIMULATION OF CORE MELT POOL FORMATION IN A REACTOR PRESSURE VESSEL LOWER HEAD USING AN EFFECTIVE CONVECTIVITY MODEL , 2009 .

[15]  P. Spalart,et al.  A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilities , 2008 .

[16]  Bal Raj Sehgal,et al.  Stabilization and termination of severe accidents in LWRs , 2006 .

[17]  P. Carman.  Fluid flow through granular beds , 1997 .

[18]  G. W. Parker,et al.  Small scale BWR core debris eutectics formation and melting experiment , 1990 .

[19]  S. Qiu,et al.  Transient behavior and maximum heat flux ratios of two-layer corium pool , 2022, International Journal of Thermal Sciences.

[20]  G. Su,et al.  Large eddy simulation on turbulent heat transfer in reactor vessel lower head corium pools , 2018 .

[21]  Daniel Dupleac,et al.  Numerical analysis of debris melting phenomena during late phase CANDU 6 severe accident , 2013 .

[22]  W. Villanueva,et al.  A Study on the Integral Effect of Corium Material Properties on Melt Pool Heat Transfer in a Boiling Water Reactor , 2011 .