Nanoimprinted polymer solar cell.

Among the various organic photovoltaic devices, the conjugated polymer/fullerene approach has drawn the most research interest. The performance of these types of solar cells is greatly determined by the nanoscale morphology of the two components (donor/acceptor) and the molecular orientation/crystallinity in the photoactive layer. A vertically bicontinuous and interdigitized heterojunction between donor and acceptor has been regarded as one of the ideal structures to enable both efficient charge separation and transport. Synergistic control of polymer orientation in the nanostructured heterojunction is also critical to improve the performance of polymer solar cells. Nanoimprint lithography has emerged as a new approach to simultaneously control both the heterojunction morphology and polymer chains in organic photovoltaics. Currently, in the area of nanoimprinted polymer solar cells, much progress has been achieved in the fabrication of nanostructured morphology, control of molecular orientation/crystallinity, deposition of acceptor materials, patterned electrodes, understanding of structure-property correlations, and device performance. This review article summarizes the recent studies on nanoimprinted polymer solar cells and discusses the outstanding challenges and opportunities for future work.

[1]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[2]  L. Schmidt‐Mende.  Nanostructured Hybrid Solar Cells , 2014 .

[3]  A. Yee,et al.  Imprinting of polymer at low temperature and pressure , 2004 .

[4]  Hui Joon Park,et al.  A Facile Route to Polymer Solar Cells with Optimum Morphology Readily Applicable to a Roll‐to‐Roll Process without Sacrificing High Device Performances , 2010, Advanced materials.

[5]  C. Shih,et al.  Efficiency improvement of blended poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6)C61 solar cells by nanoimprinting , 2009 .

[6]  Wei Zhang,et al.  Sub-10 nm imprint lithography and applications , 1997, 1997 55th Annual Device Research Conference Digest.

[7]  R. Friend,et al.  Uniaxial alignment of liquid-crystalline conjugated polymers by nanoconfinement. , 2007, Nano letters.

[8]  A. Zakhidov,et al.  Nanoimprinted P3HT/C60 solar cells optimized by oblique deposition of C60 , 2010 .

[9]  V. Studer,et al.  Room-temperature and low-pressure nanoimprint lithography , 2002 .

[10]  Christophe Vieu,et al.  Electron beam lithography: resolution limits and applications , 2000 .

[11]  L Jay Guo,et al.  Organic thin film transistors and polymer light-emitting diodes patterned by polymer inking and stamping , 2008 .

[12]  Eva Harth,et al.  EXCITON DIFFUSION AND DISSOCIATION IN CONJUGATED POLYMER/FULLERENE BLENDS AND HETEROSTRUCTURES , 1999 .

[13]  Tomi Haatainen,et al.  Continuous roll to roll nanoimprinting of inherently conducting polyaniline , 2007 .

[14]  A. Jonas,et al.  Nanoscale control of polymer crystallization by nanoimprint lithography. , 2005, Nano letters.

[15]  Valentin D. Mihailetchi,et al.  Hole Transport in Poly(phenylene vinylene)/Methanofullerene Bulk‐Heterojunction Solar Cells , 2004 .

[16]  P. Heremans,et al.  Nanoimprinted semiconducting polymer films with 50 nm features and their application to organic heterojunction solar cells , 2008, Nanotechnology.

[17]  T. Yoon,et al.  Hybrid inverted bulk heterojunction solar cells with nanoimprinted TiO2 nanopores , 2009 .

[18]  Rene Lopez,et al.  Light-trapping nano-structures in organic photovoltaic cells , 2011 .

[19]  Hole mobility enhancement by chain alignment in nanoimprinted poly(3-hexylthiophene) nanogratings for organic electronics , 2010 .

[20]  Mukti Aryal,et al.  Imprinted large-scale high density polymer nanopillars for organic solar cells , 2008 .

[21]  E. W. Meijer,et al.  Two-dimensional charge transport in self-organized, high-mobility conjugated polymers , 1999, Nature.

[22]  C. Brabec,et al.  Plastic Solar Cells , 2001 .

[23]  C. Frisbie,et al.  Enhancement of the Morphology and Open Circuit Voltage in Bilayer Polymer/Fullerene Solar Cells , 2009 .

[24]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[25]  L. Guo,et al.  Large area high density sub-20 nm SiO(2) nanostructures fabricated by block copolymer template for nanoimprint lithography. , 2009, ACS nano.

[26]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[27]  Harald Hoppe,et al.  Effect of annealing of poly(3-hexylthiophene)/fullerene bulk heterojunction composites on structural and optical properties , 2006 .

[28]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[29]  P. Lugli,et al.  Nanostructured interfaces in polymer solar cells , 2010 .

[30]  Donal D. C. Bradley,et al.  Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phase , 2000 .

[31]  Gang Li,et al.  Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene) , 2005 .

[32]  F. Castro,et al.  Poly(3-hexylthiophene)/C60 heterojunction solar cells: Implication of morphology on performance and ambipolar charge collection , 2008 .

[33]  Xiangang Luo,et al.  Efficiency Enhancement of Organic Solar Cells Using Transparent Plasmonic Ag Nanowire Electrodes , 2010, Advanced materials.

[34]  Chain-Shu Hsu,et al.  Conjugated polymer nanostructures for organic solar cell applications , 2011 .

[35]  D. Carroll,et al.  Thermal diffusion processes in bulk heterojunction formation for poly-3-hexylthiophene/C60 single heterojunction photovoltaics , 2006 .

[36]  Huifeng Li,et al.  Improving organic thin-film transistor performance by nanoimprint-induced chain ordering , 2008 .

[37]  Stephen R. Forrest,et al.  Small molecular weight organic thin-film photodetectors and solar cells , 2003 .

[38]  R. Friend,et al.  Polarization anisotropy dynamics for thin films of a conjugated polymer aligned by nanoimprinting , 2008 .

[39]  R. Cingolani,et al.  Multilevel, room-temperature nanoimprint lithography for conjugated polymer-based photonics. , 2005, Nano letters.

[40]  Y. Hirai,et al.  Fine pattern transfer of functional organic polymers by nanoimprint , 2011 .

[41]  Jessica E. Kroeze,et al.  Contactless Determination of the Photoconductivity Action Spectrum, Exciton Diffusion Length, and Charge Separation Efficiency in Polythiophene-Sensitized TiO2 Bilayers , 2003 .

[42]  Chi Jung Kang,et al.  Hybrid photovoltaic cell with well-ordered nanoporous titania–P3HT by nanoimprinting lithography , 2008 .

[43]  A. Zakhidov,et al.  Nanoimprint of dehydrated PEDOT:PSS for organic photovoltaics , 2011, Nanotechnology.

[44]  Ole Hagemann,et al.  A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration , 2009 .

[45]  R. Curry,et al.  Low cost patterning of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) films to increase organic photovoltaic device efficiency , 2008 .

[46]  J. Hummelen,et al.  Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.

[47]  Jung-Won Kim,et al.  Optimum design of ordered bulk heterojunction organic photovoltaics , 2011 .

[48]  R. Service,et al.  Solar energy. Outlook brightens for plastic solar cells. , 2011, Science.

[49]  Li Tao,et al.  Characterizing nanoimprint profile shape and polymer flow behavior using visible light angular scatterometry , 2007 .

[50]  P. Blom,et al.  Electric-field and temperature dependence of the hole mobility in poly(p-phenylene vinylene) , 1997 .

[51]  Christoph J. Brabec,et al.  Correlation Between Structural and Optical Properties of Composite Polymer/Fullerene Films for Organic Solar Cells , 2005 .

[52]  Albert Rose,et al.  Double Extraction of Uniformly Generated Electron‐Hole Pairs from Insulators with Noninjecting Contacts , 1971 .

[53]  Toh-Ming Lu,et al.  Enhanced step coverage by oblique angle physical vapor deposition , 2005 .

[54]  Frederik C. Krebs,et al.  A brief history of the development of organic and polymeric photovoltaics , 2004 .

[55]  X. Zhao,et al.  Lithographically defined uniform worm-shaped polymeric nanoparticles , 2010, Nanotechnology.

[56]  N. Lewis.  Toward Cost-Effective Solar Energy Use , 2007, Science.

[57]  S. Shaheen,et al.  Hydrostatic pressure effects on poly(3-hexylthiophene) thin film transistors , 2008 .

[58]  C. Brabec,et al.  2.5% efficient organic plastic solar cells , 2001 .

[59]  Nir Tessler,et al.  Low cost, nanometer scale nanoimprinting - Application to organic solar cells optimization , 2011 .

[60]  Joseph L. Keddie,et al.  Size-Dependent Depression of the Glass Transition Temperature in Polymer Films , 1994 .

[61]  Harry D. Rowland,et al.  Molecular Confinement Accelerates Deformation of Entangled Polymers During Squeeze Flow , 2008, Science.

[62]  Younan Xia,et al.  Nanofabrication at high throughput and low cost. , 2010, ACS nano.

[63]  Heon Lee,et al.  Direct indium tin oxide patterning using thermal nanoimprint lithography for highly efficient optoelectronic devices , 2009 .

[64]  L. Guo,et al.  Room‐Temperature, Low‐Pressure Nanoimprinting Based on Cationic Photopolymerization of Novel Epoxysilicone Monomers , 2005, Advanced materials.

[65]  Michael James,et al.  Morphology of All‐Solution‐Processed “Bilayer” Organic Solar Cells , 2011, Advanced materials.

[66]  Yong Chen,et al.  Roll in and roll out: a path to high-throughput nanoimprint lithography. , 2009, ACS nano.

[67]  Russell Gaudiana.  Third-Generation Photovoltaic Technology − The Potential for Low-Cost Solar Energy Conversion , 2010 .

[68]  J. Dual,et al.  Mechanical characterization of PEDOT : PSS thin films , 2009 .

[69]  Wolfgang Brütting,et al.  Exciton diffusion and optical interference in organic donor–acceptor photovoltaic cells , 2001 .

[70]  L Jay Guo.  Recent progress in nanoimprint technology and its applications , 2004 .

[71]  A. J. Heeger,et al.  Photoinduced Electron Transfer from a Conducting Polymer to Buckminsterfullerene , 1992, Science.

[72]  Donal D. C. Bradley,et al.  Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene , 2005 .

[73]  R. Friend,et al.  Formation of nanopatterned polymer blends in photovoltaic devices. , 2010, Nano letters.

[74]  Z. Cui,et al.  Room temperature nanoimprint lithography using a bilayer of HSQ/PMMA resist stack , 2005 .

[75]  J. Y. Park,et al.  Solvent-assisted soft nanoimprint lithography for structured bilayer heterojunction organic solar cells. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[76]  P. Paul Ruden,et al.  Hydrostatic-pressure dependence of organic thin-film transistor current versus voltage characteristics , 2004 .

[77]  Jan Fyenbo,et al.  Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing , 2010 .

[78]  W. Huck,et al.  Formation of Well‐Ordered Heterojunctions in Polymer:PCBM Photovoltaic Devices , 2011 .

[79]  H. Low,et al.  The use of nanoimprint lithography to improve efficiencies of bilayer organic solar cells based on P3HT and a small molecule acceptor , 2009 .

[80]  A. Yee,et al.  Stability of functional polymers after plasticizer-assisted imprint lithography , 2004 .

[81]  C. McNeill,et al.  Influence of Annealing and Interfacial Roughness on the Performance of Bilayer Donor/Acceptor Polymer Photovoltaic Devices , 2010 .

[82]  Hee‐Tae Jung,et al.  Enhanced solar-cell efficiency in bulk-heterojunction polymer systems obtained by nanoimprinting with commercially available AAO membrane filters. , 2009, Small.

[83]  Tian-An Chen,et al.  Regiocontrolled Synthesis of Poly(3-alkylthiophenes) Mediated by Rieke Zinc: Their Characterization and Solid-State Properties , 1995 .

[84]  Hui Joon Park,et al.  Photonic color filters integrated with organic solar cells for energy harvesting. , 2011, ACS nano.

[85]  Zhijun Hu,et al.  Control of crystal orientation in soft nanostructures by nanoimprint lithography , 2010 .

[86]  C. Hawker,et al.  Nanostructured Hybrid Solar Cells: Dependence of the Open Circuit Voltage on the Interfacial Composition , 2010, Advanced materials.

[87]  Ifor D. W. Samuel,et al.  Increased Efficiency and Controlled Light Output from a Microstructured Light-Emitting Diode , 2001 .

[88]  Max Shtein,et al.  Flexible conjugated polymer photovoltaic cells with controlled heterojunctions fabricated using nanoimprint lithography , 2007 .

[89]  C. A. Walsh,et al.  Efficient photodiodes from interpenetrating polymer networks , 1995, Nature.

[90]  P. Nealey,et al.  Molecular transfer printing using block copolymers. , 2009, ACS nano.

[91]  Jonathan M. Ziebarth,et al.  Enhanced Hole Mobility in Regioregular Polythiophene Infiltrated in Straight Nanopores , 2005 .

[92]  L Jay Guo,et al.  Dynamic nanoinscribing for continuous and seamless metal and polymer nanogratings. , 2009, Nano letters.

[93]  S. Chou,et al.  Imprint Lithography with 25-Nanometer Resolution , 1996, Science.

[94]  Joseph M. DeSimone,et al.  Nanostructured Titania−Polymer Photovoltaic Devices Made Using PFPE-Based Nanomolding Techniques , 2008 .

[95]  Benjamin J. Schwartz,et al.  Reappraising the Need for Bulk Heterojunctions in Polymer−Fullerene Photovoltaics: The Role of Carrier Transport in All-Solution-Processed P3HT/PCBM Bilayer Solar Cells , 2009 .

[96]  L. Jay Guo,et al.  Organic Solar Cells Using Nanoimprinted Transparent Metal Electrodes , 2008 .

[97]  L. Guo,et al.  Large-area roll-to-roll and roll-to-plate nanoimprint lithography: a step toward high-throughput application of continuous nanoimprinting. , 2009, ACS nano.

[98]  Li-Jing Cheng,et al.  Nanoscale protein patterning by imprint lithography , 2004 .

[99]  Fan Yang,et al.  Photocurrent generation in nanostructured organic solar cells. , 2008, ACS nano.

[100]  Martin Brinkmann,et al.  Orientation of Regioregular Poly(3‐hexylthiophene) by Directional Solidification: A Simple Method to Reveal the Semicrystalline Structure of a Conjugated Polymer , 2006 .

[101]  Ximin He,et al.  Controlling nanoscale morphology in polymer photovoltaic devices , 2010 .

[102]  Mukti Aryal,et al.  Nano-confinement Induced Chain Alignment in Ordered P3ht Nanostructures Defined by Nanoimprint Lithography High-density, and Ordered Nanostructures in Conjugated Polymer Poly(3-hexylthiophene) or P3ht, and Also to Simultaneously Control 3d Chain Alignment within These P3ht Nanostructures. Out-of-pla , 2022 .

[103]  Lukas Schmidt-Mende,et al.  Nanostructured Organic and Hybrid Solar Cells , 2011, Advanced materials.

[104]  K. Yager,et al.  Nanoimprint-induced molecular orientation in semiconducting polymer nanostructures. , 2011, ACS nano.

[105]  Thuc‐Quyen Nguyen,et al.  Effects of thin film processing on pentacene/C60 bilayer solar cell performance , 2007 .

[106]  G. Dennler,et al.  Bulk heterojunction solar cells with thick active layers and high fill factors enabled by a bithiophene-co-thiazolothiazole push-pull copolymer , 2011 .

[107]  Paolo Lugli,et al.  Design and fabrication of organic solar cells structured via nanoimprint lithography , 2009 .

[108]  A. Walker,et al.  Dynamical Monte Carlo modelling of organic solar cells: the dependence of internal quantum efficiency on morphology. , 2005, Nano letters.

[109]  The direct nano-patterning of ZnO using nanoimprint lithography with ZnO-sol and thermal annealing , 2009 .

[110]  Christoph J. Brabec,et al.  Production Aspects of Organic Photovoltaics and Their Impact on the Commercialization of Devices , 2005 .

[111]  M. Toney,et al.  Highly oriented crystals at the buried interface in polythiophene thin-film transistors , 2006 .

[112]  Bernard Geffroy,et al.  Implementation of submicrometric periodic surface structures toward improvement of organic-solar-cell performances , 2006 .

[113]  Dieter Meissner,et al.  Nanoscale Morphology of Conjugated Polymer/Fullerene‐Based Bulk‐ Heterojunction Solar Cells , 2004 .

[114]  Frederik C. Krebs,et al.  Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing , 2009 .

[115]  Hyewon Kang,et al.  Low-Pressure Nanoimprint Lithography , 2004 .

[116]  Hui Joon Park,et al.  Transparent Cu nanowire mesh electrode on flexible substrates fabricated by transfer printing and its application in organic solar cells , 2010 .