Firebrand Production from Building Components Fitted with Siding Treatments.

Firebrand production from real-scale building components under well-controlled laboratory conditions was investigated. Re-entrant corner assemblies were ignited and during the combustion process, firebrands were collected to determine the size/mass distribution generated from such real-scale building components under varying wind speed. In prior work, a unique ignition methodology was developed to generate firebrands from re-entrant corner assemblies constructed of wood studs and oriented strand board (OSB). In this study, this ignition methodology was applied to re-entrant corners constructed from wood studs/OSB but fitted with actual siding treatments (tar paper and cedar siding) to determine the influence of siding treatments on firebrand generation from wall assemblies. Firebrands were collected with pans filled with water, and then the size and mass of firebrands were measured after drying. The size and mass distributions of firebrands collected in this study were compared with the data from prior component tests as well as the limited studies available in the literature on this topic. Some firebrands were found to be lighter for a given projected area than others, likely produced from cedar siding or tar paper. The effects of applied siding treatments on firebrand production are discussed in detail.

[1]  Samuel L. Manzello,et al.  Firebrand generation from burning vegetation , 2007 .

[2]  I. K. Knight.  The Design and Construction of a Vertical Wind Tunnel for the Study of Untethered Firebrands in Flight , 2001 .

[3]  Samuel L. Manzello,et al.  Experimental investigation of firebrands: Generation and ignition of fuel beds , 2008 .

[4]  Samuel L. Manzello,et al.  Firebrand Generation Data Obtained from a Full Scale Structure Burn | NIST , 2011 .

[5]  Yuji Hasemi,et al.  Firebrand deposition and measurements of collected firebrands generated and transported from a full-Scale burn test using a large wooden building , 2014 .

[6]  Samuel L. Manzello,et al.  The size and mass distribution of firebrands collected from ignited building components exposed to wind , 2013 .

[7]  Haihui Wang.  Analysis on Downwind Distribution of Firebrands Sourced from a Wildland Fire , 2011 .

[8]  Yoshihiko Hayashi,et al.  Real-Scale Fire Wind Tunnel Experiment on Generation of Firebrands from a House on Fire , 2004 .

[9]  O. A. Ezekoye,et al.  Thermo-mechanical modeling of firebrand breakage on a fractal tree , 2013 .

[10]  Carlos Sánchez Tarifa,et al.  On the flight pahts and lifetimes of burning particles of wood , 1965 .

[11]  Yoshifumi Ohmiya,et al.  An Investigation on the Distribution of Fire Brands and Spot Fires Due to a Hotel Fire , 2000 .

[12]  Samuel L. Manzello,et al.  Firebrands generated from a full-scale structure burning under well-controlled laboratory conditions , 2014 .

[13]  David R. Weise,et al.  Firebrands and spotting ignition in large-scale fires , 2010 .

[14]  Ali Tohidi,et al.  Statistical description of firebrand size and shape distribution from coniferous trees for use in Metropolis Monte Carlo simulations of firebrand flight distance , 2015 .

[15]  Samuel L. Manzello,et al.  Development of rapidly deployable instrumentation packages for data acquisition in wildland–urban interface (WUI) fires , 2010 .

[16]  Samuel L. Manzello,et al.  Characterizing Firebrand Exposure from Wildland–Urban Interface (WUI) Fires: Results from the 2007 Angora Fire , 2014 .