In optical communication system to compensate dispersion Fiber Bragg grating (FBG) is one among the applicable and vital parts. Here we tend to are calculative best quantity of parameters by simulating the model so observe the result of this element in information receiver. To tackle the non linear effects of transmission Fiber Bragg grating has been utilized with optisystem software system very length. The analysis supported the chromatic dispersion. During this analysis style system with fiber Bragg grating and while not fiber Bragg grating and really the length. The role of the communication is to transport the optical signal from transmitter to receiver while not distorting it. Most light wave communication systems use optical fibers because the communication because fibers will transmit light-weight with a relatively bit of power loss. Fiber loss is, of course, a vital style issue, because it determines directly the repeater spacing of a long-haul light wave system. Another vital style issue is fiber dispersion that results in broadening of individual pulses within the fiber.
[1]
K. Ennser,et al.
Optimization of apodized linearly chirped fiber gratings for optical communications
,
1998
.
[2]
Ning Tigang,et al.
The system of L-band 2×10 Gb/s WDM transmission over conventional single mode fibre with 600 km by chirped fibre Bragg gratings dispersion compensation
,
2007
.
[3]
Jianping Yao,et al.
Chirped Microwave Pulse Generation Based on Optical Spectral Shaping and Wavelength-to-Time Mapping Using a Sagnac Loop Mirror Incorporating a Chirped Fiber Bragg Grating
,
2009,
Journal of Lightwave Technology.
[4]
Yicheng Lai,et al.
Distributed temperature sensing using a chirped fibre Bragg grating
,
2004
.
[5]
A. Zeitouny,et al.
Optical generation of linearly chirped microwave pulses using fiber Bragg gratings
,
2005,
IEEE Photonics Technology Letters.