Infrared radiation constitutive model of sandstone during loading fracture

[1]  Xiaoqing Wang,et al.  Triaxial compression behavior of large-scale jointed coal: a numerical study , 2022, International Journal of Coal Science & Technology.

[2]  Qingsheng Bai,et al.  Using true-triaxial stress path to simulate excavation-induced rock damage: a case study , 2022 .

[3]  Liqiang Ma,et al.  Infrared radiation quantification of rock damage and its constitutive modeling under loading , 2022, Infrared Physics & Technology.

[4]  J. Shao,et al.  A multi-scale model of plasticity and damage for rock-like materials with pores and inclusions , 2021 .

[5]  Mohammad Reza Azadi Kakavand,et al.  An enhanced damage plasticity model for predicting the cyclic behavior of plain concrete under multiaxial loading conditions , 2020, Frontiers of Structural and Civil Engineering.

[6]  Yuehua Wu,et al.  Cyclic fatigue characteristics of rock failure using infrared radiation as precursor to violent failure: Experimental insights from loading and unloading response , 2020 .

[7]  K. Cao,et al.  Using the characteristics of infrared radiation during the process of strain energy evolution in saturated rock as a precursor for violent failure , 2020 .

[8]  Guichen Li,et al.  Experimental investigation on the nanoindentation viscoelastic constitutive model of quartz and kaolinite in mudstone , 2020, International Journal of Coal Science & Technology.

[9]  K. Cao,et al.  An Experimental Study on Infrared Radiation Characteristics of Sandstone Samples Under Uniaxial Loading , 2019, Rock Mechanics and Rock Engineering.

[10]  G. Nguyen,et al.  An experimental and theoretical stress-strain-damage correlation procedure for constitutive modelling of granite , 2019, International Journal of Rock Mechanics and Mining Sciences.

[11]  A. Haghshenas,et al.  Non-destructive testing and fatigue life prediction at different environmental temperatures , 2019, Infrared Physics & Technology.

[12]  Guangyao Si,et al.  A plastic strain-based damage model for heterogeneous coal using cohesion and dilation angle , 2018, International Journal of Rock Mechanics and Mining Sciences.

[13]  Chengguo Zhang,et al.  The role of stress in controlling infrared radiation during coal and rock failures , 2018, Strain.

[14]  Liqiang Ma,et al.  Spatial-temporal infrared radiation precursors of coal failure under uniaxial compressive loading , 2018, Infrared Physics & Technology.

[15]  M. He,et al.  Quantitative description theory of water migration in rock sites based on infrared radiation temperature , 2018, Engineering Geology.

[16]  Pierre-Yves Hicher,et al.  Infrared thermography of rock fracture , 2017 .

[17]  Fang Zhang,et al.  Experimental investigation of the occurrence of rockburst in a rock specimen through infrared thermography and acoustic emission , 2017 .

[18]  Chunlai Wang,et al.  Predicting points of the infrared precursor for limestone failure under uniaxial compression , 2016 .

[19]  S. Mineo,et al.  The Use of Infrared Thermography for Porosity Assessment of Intact Rock , 2016, Rock Mechanics and Rock Engineering.

[20]  Domenico Calcaterra,et al.  InfraRed Thermography proposed for the estimation of the Cooling Rate Index in the remote survey of rock masses , 2016 .

[21]  Günter Hofstetter,et al.  A damage plasticity model for different types of intact rock , 2015 .

[22]  Jie Li,et al.  A rate-dependent stochastic damage–plasticity model for quasi-brittle materials , 2015 .

[23]  P. Moser,et al.  Size distribution functions for rock fragments , 2014 .

[24]  A. Ibrahimbegovic,et al.  Anisotropic viscodamage–viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behaviour , 2014 .

[25]  Peter Grassl,et al.  CDPM2: A damage-plasticity approach to modelling the failure of concrete , 2013, 1307.6998.

[26]  Sun-Myung Kim,et al.  Computational applications of a coupled plasticity-damage constitutive model for simulating plain concrete fracture , 2010 .

[27]  C. Zhou,et al.  An elasto-plastic damage constitutive model with double yield surfaces for saturated soft rock , 2010 .

[28]  Ziad N. Taqieddin,et al.  Anisotropic damage-plasticity model for concrete , 2008 .

[29]  George Z. Voyiadjis,et al.  A plasticity and anisotropic damage model for plain concrete , 2007 .

[30]  Milan Jirásek,et al.  Damage-plastic model for concrete failure , 2006 .

[31]  Jian-Fu Shao,et al.  A coupled elastoplastic damage model for semi-brittle materials and extension to unsaturated conditions , 2006 .

[32]  Rui Faria,et al.  An energy release rate-based plastic-damage model for concrete , 2006 .

[33]  K. T. Chau,et al.  Coupling between anisotropic damage and permeability variation in brittle rocks , 2005 .

[34]  Kaspar Willam,et al.  A coupled elastoplastic damage model for geomaterials , 2004 .

[35]  Kaspar Willam,et al.  LOCALIZATION CHARACTERISTICS OF TRIAXIAL CONCRETE MODEL , 1999 .

[36]  Jeeho Lee,et al.  A plastic-damage concrete model for earthquake analysis of dams , 1998 .

[37]  Jeeho Lee,et al.  Plastic-Damage Model for Cyclic Loading of Concrete Structures , 1998 .

[38]  Roman Lackner,et al.  An anisotropic elastoplastic‐damage model for plain concrete , 1998 .

[39]  J. Oliver,et al.  A strain-based plastic viscous-damage model for massive concrete structures , 1998 .

[40]  Michael Ortiz,et al.  A constitutive theory for the inelastic behavior of concrete , 1985 .

[41]  J. Lemaître.  How to use damage mechanics , 1984 .

[42]  Jian-Fu Shao,et al.  Coupled elastoplastic damage modeling of anisotropic rocks , 2010 .

[43]  Jian-Fu Shao,et al.  Modeling of elastoplastic damage behavior of a claystone , 2003 .

[44]  J. Ju,et al.  On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects , 1989 .