Characterization of highly interconnected porous poly(lactic acid) and chitosan-coated poly(lactic acid) scaffold fabricated by vacuum-assisted resin transfer molding and particle leaching

[1]  S. Jafari,et al.  Evaluation of different factors affecting antimicrobial properties of chitosan. , 2016, International journal of biological macromolecules.

[2]  C. Vasile,et al.  Novel procedure to enhance PLA surface properties by chitosan irreversible immobilization , 2016 .

[3]  G. Pei,et al.  Low-Temperature Additive Manufacturing of Biomimic Three-Dimensional Hydroxyapatite/Collagen Scaffolds for Bone Regeneration. , 2016, ACS applied materials & interfaces.

[4]  T. Lu,et al.  Bioactivity assessment of PLLA/PCL/HAP electrospun nanofibrous scaffolds for bone tissue engineering. , 2016, Life sciences.

[5]  Mingshi Yang,et al.  Design of PLGA-based depot delivery systems for biopharmaceuticals prepared by spray drying. , 2016, International journal of pharmaceutics.

[6]  Zhixiang Cui,et al.  Characterization of 3D elastic porous polydimethylsiloxane (PDMS) cell scaffolds fabricated by VARTM and particle leaching , 2016 .

[7]  Xiao Hu,et al.  Impact of foaming air on melting and crystallization behaviors of microporous PLA scaffolds , 2015, Journal of Thermal Analysis and Calorimetry.

[8]  Woo-Kul Lee,et al.  Fabrication of porous chitosan-polyvinyl pyrrolidone scaffolds from a quaternary system via phase separation , 2015, Journal of biomaterials science. Polymer edition.

[9]  F. Auger,et al.  Anticancer properties of chitosan on human melanoma are cell line dependent. , 2015, International journal of biological macromolecules.

[10]  Li Duan,et al.  Evaluation of the novel three-dimensional porous poly (L-lactic acid)/nano-hydroxyapatite composite scaffold. , 2015, Bio-medical materials and engineering.

[11]  G. Sadowski,et al.  Modelling polylactide/water/dioxane systems for TIPS scaffold fabrication , 2014 .

[12]  Marissa A. Paglicawan,et al.  Plasma-treated abaca fabric/unsaturated polyester composite fabricated by vacuum-assisted resin transfer molding , 2014 .

[13]  Yongju Zang,et al.  Fabrication and Properties of Porous Scaffolds of PLA-PEG Biocomposite for Bone Tissue Engineering , 2014 .

[14]  Long Jiang,et al.  Effect of NR on the hydrolytic degradation of PLA , 2013 .

[15]  Jiandong Ye,et al.  Improvement of cell response of the poly(lactic-co-glycolic acid)/calcium phosphate cement composite scaffold with unidirectional pore structure by the surface immobilization of collagen via plasma treatment. , 2013, Colloids and surfaces. B, Biointerfaces.

[16]  Akira Todoroki,et al.  Flow control by progressive forecasting using numerical simulation during vacuum-assisted resin transfer molding , 2013 .

[17]  Aldo R Boccaccini,et al.  Osteochondral tissue engineering: scaffolds, stem cells and applications , 2012, Journal of cellular and molecular medicine.

[18]  Q. Cai,et al.  Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching. , 2012, Materials science & engineering. C, Materials for biological applications.

[19]  Changyu Shen,et al.  Fabrication and characterization of injection molded poly (ε-caprolactone) and poly (ε-caprolactone)/hydroxyapatite scaffolds for tissue engineering. , 2012, Materials science & engineering. C, Materials for biological applications.

[20]  Suresh G. Advani,et al.  Experimental validation of post-filling flow in vacuum assisted resin transfer molding processes , 2012 .

[21]  K. Shakesheff,et al.  Uniform cell colonization of porous 3-D scaffolds achieved using radial control of surface chemistry. , 2011, Acta biomaterialia.

[22]  Ding Cao,et al.  Cell adhesive and growth behavior on electrospun nanofibrous scaffolds by designed multifunctional composites. , 2011, Colloids and surfaces. B, Biointerfaces.

[23]  Lih-Sheng Turng,et al.  An injection molding process for manufacturing highly porous and interconnected biodegradable polymer matrices for use as tissue engineering scaffolds. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[24]  A. Atala,et al.  Composite scaffolds for the engineering of hollow organs and tissues. , 2009, Methods.

[25]  A. Boccaccini,et al.  In vitro biocompatibility of 45S5 Bioglass®‐derived glass–ceramic scaffolds coated with poly(3‐hydroxybutyrate) , 2009, Journal of tissue engineering and regenerative medicine.

[26]  Jin Man Kim,et al.  In vitro and in vivo characteristics of PCL scaffolds with pore size gradient fabricated by a centrifugation method. , 2007, Biomaterials.

[27]  Michael S Sacks,et al.  Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications. , 2005, Biomaterials.

[28]  T. Park,et al.  A facile preparation of highly interconnected macroporous PLGA scaffolds by liquid–liquid phase separation II , 2005 .

[29]  Woo Il Lee,et al.  Analysis of vacuum bag resin transfer molding process , 2001 .