Optical modeling of a cylindrical-hemispherical receiver for parabolic dish concentrator

[1]  B. Hartiti,et al.  Performance study of a new parabolic trough design under optical concentrator effect , 2022, Applied Thermal Engineering.

[2]  K. S. Reddy,et al.  Optical modeling of corrugation cavity receiver for large-aperture solar parabolic dish collector , 2022, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[3]  Ahmed M. Daabo,et al.  Solar parabolic dish collector for concentrated solar thermal systems: a review and recommendations , 2022, Environmental Science and Pollution Research.

[4]  D. Riveros-Rosas,et al.  Study of the Radiation Flux Distribution in a Parabolic Dish Concentrator , 2021, Energies.

[5]  P. Dutta,et al.  Optical characterization of a fixed focus Scheffler reflector for pressurized solar receiver testing , 2021, Solar Energy.

[6]  Nicolás G. Tripp,et al.  Effect of surface material properties and operating conditions on the heat flux and temperature distributions in the cavity receiver of a solar-dish-coupled biomass gasification reactor , 2021 .

[7]  S. Abbas,et al.  An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator , 2021 .

[8]  A. Benyoussef,et al.  Performance study of a new smart hybrid parabolic trough collector system integrated with hybrid tubular thermoelectric generator , 2021, Applied Thermal Engineering.

[9]  Vahid Madadi Avargani,et al.  Optical analysis and heat transfer modeling of a helically baffled cavity receiver under solar flux non-uniformity and windy conditions , 2020 .

[10]  J. Meyer,et al.  Using CFD and ray tracing to estimate the heat losses of a tubular cavity dish receiver for different inclination angles , 2020 .

[11]  Q. Falcoz,et al.  Combined optics and heat transfer numerical model of a solar conical receiver with built-in helical pipe , 2020 .

[12]  Q. Falcoz,et al.  Effects of critical geometric parameters on the optical performance of a conical cavity receiver , 2019, Frontiers in Energy.

[13]  P. Bournot,et al.  A receiver geometrical details effect on a solar parabolic dish collector performance , 2019, Energy Reports.

[14]  C. Tzivanidis,et al.  Optical and thermal analysis of different cavity receiver designs for solar dish concentrators , 2019, Energy Conversion and Management: X.

[15]  Dai Liu,et al.  A numerical study on optical and thermodynamic characteristics of a spherical cavity receiver , 2019, Applied Thermal Engineering.

[16]  Vahid Madadi Avargani,et al.  A novel optical-thermal modeling of a parabolic dish collector with a helically baffled cylindrical cavity receiver , 2019, Energy.

[17]  G. Najafi,et al.  Comparative study of spiral and conical cavity receivers for a solar dish collector , 2018, Energy Conversion and Management.

[18]  Michael Wild,et al.  Optical design and experimental characterization of a solar concentrating dish system for fuel production via thermochemical redox cycles , 2018, Solar Energy.

[19]  C. Zhang,et al.  Effects of geometric parameters on thermal performance for a cylindrical solar receiver using a 3D numerical model , 2017 .

[20]  Raya Al-Dadah,et al.  University of Birmingham Experimental and numerical investigation on the optical and thermal performance of solar parabolic dish and corrugated spiral cavity receiver , 2017 .

[21]  Saad Mahmoud,et al.  Numerical investigation of pitch value on thermal performance of solar receiver for solar powered Brayton cycle application , 2017 .

[22]  Raya Al-Dadah,et al.  The effect of receiver geometry on the optical performance of a small-scale solar cavity receiver for parabolic dish applications , 2016 .

[23]  Y. Ge,et al.  Optical performance of a solar dish concentrator/receiver system: Influence of geometrical and surface properties of cavity receiver , 2016 .

[24]  Ahmed M. Daabo,et al.  University of Birmingham The optical efficiency of three different geometries of a small scale cavity receiver for concentrated solar applications , 2016 .

[25]  J. Meyer,et al.  Combining ray tracing and CFD in the thermal analysis of a parabolic dish tubular cavity receiver , 2016 .

[26]  Sendhil Kumar Natarajan,et al.  Experimental performance investigation of modified cavity receiver with fuzzy focal solar dish concentrator , 2015 .

[27]  Josua P. Meyer,et al.  The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle , 2014 .

[28]  Atul A. Sagade,et al.  Comparative experimental analysis of the effect of convective heat losses on the performance of parabolic dish water heater , 2013 .

[29]  Bin Liu,et al.  Optical efficiency analysis of cylindrical cavity receiver with bottom surface convex , 2013 .

[30]  Sendhil Kumar Natarajan,et al.  Comparison of receivers for solar dish collector system , 2008 .

[31]  N. D. Kaushika,et al.  Performance of a low cost solar paraboloidal dish steam generating system , 2000 .

[32]  G. Johnston.  Focal region measurements of the 20 m2 tiled dish at the Australian National University , 1998 .

[33]  Glen Johnston,et al.  Flux Mapping the 400 m2 “Big Dish” at the Australian National University , 1995 .

[34]  Peter D. Jones,et al.  Concentration distributions in cylindrical receiver/paraboloidal dish concentrator systems , 1995 .

[35]  Leonard D. Jaffe,et al.  Dish Concentrators for Solar Thermal Energy , 1983 .

[36]  C. Tzivanidis,et al.  Design, simulation and optimization of a solar dish collector with spiral-coil thermal absorber , 2016 .

[37]  H. P. Garg,et al.  Solar flux distributions from circular cylindrical concentrators , 1983 .