Ergonomic evaluation of a wearable assistive device for overhead work

Overhead work is an important risk factor for upper extremity (UE) musculoskeletal disorders. We examined the potential of a mechanical arm and an exoskeletal vest as a wearable assistive device (WADE) for overhead work. Twelve participants completed 10 minutes of simulated, intermittent overhead work, using each of three payloads (1.1, 3.4 and 8.1 kg) and with/without the WADE. Ratings of perceived discomfort (RPDs) and electromyography (EMG) were obtained for the upper arms, shoulders and low back. Using the WADE, UE RPDs decreased by ∼50% with the heavier payloads, whereas smaller (∼25%) and non-significant increases in low-back RPDs were found and were relatively independent of payload. Changes in RPDs with WADE use were consistent with physical demands indicated by EMG, though EMG-based differences in fatigue were less apparent. Participants generally preferred using the WADE, particularly with heavier payloads. These results supported the potential utility of a WADE as an intervention for overhead work. Practitioner Summary: A wearable assistive device for overhead work reduced physical demands on the upper extremity and had high acceptance, though some evidence suggested increased demands at the low back. While some design needs were found and field-testing is needed, this may be a useful practical intervention.

[1]  R Core Team,et al.  R: A language and environment for statistical computing. , 2014 .

[2]  P. Buckle,et al.  The State of Scientific Knowledge Regarding Work Related Neck and Upper Limb Musculoskeletal Disorders , 2000 .

[3]  M. Nussbaum,et al.  Muscle fatigue and endurance during repetitive intermittent static efforts: development of prediction models , 2006, Ergonomics.

[4]  J R Potvin,et al.  Trunk Muscle Co‐contraction Increases During Fatiguing, Isometric, Lateral Bend Exertions: Possible Implications for Spine Stability , 1998, Spine.

[5]  Alan Barr,et al.  Field Evaluation of a Modified Intervention for Overhead Drilling , 2010, Journal of occupational and environmental hygiene.

[6]  R Kadefors,et al.  Subjective and objective evaluation of shoulder muscle fatigue. , 1994, Ergonomics.

[7]  Clark R. Dickerson,et al.  Overhead work: Identification of evidence-based exposure guidelines , 2008 .

[8]  Kaj Bo Veiersted,et al.  Sustained muscle tension as a risk factor for trapezius myalgia , 1994 .

[9]  Grant D. Huang,et al.  Occupational stress and work-related upper extremity disorders: concepts and models. , 2002, American journal of industrial medicine.

[10]  G. Sjøgaard,et al.  Development of muscle fatigue as assessed by electromyography and mechanomyography during continuous and intermittent low-force contractions: effects of the feedback mode , 2002, European Journal of Applied Physiology.

[11]  W. Stauber,et al.  Factors involved in strain-induced injury in skeletal muscles and outcomes of prolonged exposures. , 2004, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[12]  H. Hermens,et al.  European recommendations for surface electromyography: Results of the SENIAM Project , 1999 .

[13]  Leanna M. Horton,et al.  Effects of rotation frequency and task order on localised muscle fatigue and performance during repetitive static shoulder exertions , 2012, Ergonomics.

[14]  W. Marras,et al.  Occupational risk factors associated with soft tissue disorders of the shoulder: a review of recent investigations in the literature. , 1993, Ergonomics.

[15]  J. Côté,et al.  Update on the Relation Between Pain and Movement: Consequences for Clinical Practice , 2010, The Clinical Journal of Pain.

[16]  J Petzäll,et al.  Ergonomics in parallelized car assembly: a case study, with reference also to productivity aspects. , 1996, Applied ergonomics.

[17]  Alan Barr,et al.  DEVELOPMENT AND EVALUATION OF A NEW DEVICE FOR OVERHEAD DRILLING. , 2007, Professional safety.

[18]  A. Silman,et al.  Occupational risk factors for shoulder pain: a systematic review , 2000, Occupational and environmental medicine.

[19]  G. Borg Psychophysical scaling with applications in physical work and the perception of exertion. , 1990, Scandinavian journal of work, environment & health.

[20]  M. Nussbaum,et al.  Mathematical Models of Localized Muscle Fatigue: Sensitivity Analysis and Assessment of Two Occupationally-Relevant Models , 2015, PloS one.

[21]  Sue A Ferguson,et al.  Musculoskeletal disorder risk as a function of vehicle rotation angle during assembly tasks. , 2011, Applied ergonomics.

[22]  Maury A Nussbaum,et al.  Fatigue during prolonged intermittent overhead work: reliability of measures and effects of working height , 2007, Ergonomics.

[23]  David Rempel,et al.  Overhead drilling: comparing three bases for aligning a drilling jig to vertical. , 2010, Journal of safety research.

[24]  W S Marras,et al.  Spine loading as a function of lift frequency, exposure duration, and work experience. , 2006, Clinical biomechanics.

[25]  C. D. De Luca,et al.  Myoelectrical manifestations of localized muscular fatigue in humans. , 1984, Critical reviews in biomedical engineering.

[26]  Yves Roquelaure,et al.  Risk factors for upper-extremity musculoskeletal disorders in the working population. , 2009, Arthritis and rheumatism.

[27]  M A Nussbaum,et al.  Fatigue and endurance limits during intermittent overhead work. , 2001, AIHAJ : a journal for the science of occupational and environmental health and safety.