Effects of Liquid Holdup in Condensers on the Start‐Up of Reactive Distillation Columns

Compared with start-ups in conventional distillation columns, those in reactive distillation (RD) columns are much more time and energy consuming, and generate a large amount of by-products which are not easy to deal with together. For several years, researchers have been trying out different methods to shorten the time required to lower the cost of the start-up. In this work, a rigorous dynamic model in the ChemCAD simulator is applied to model the start-up process for the esterification of ethyl acetate in a reactive distillation column. In the model, two sets of equations are employed: one for the fill-up and heating stage and the other for the equilibration process which follows. In the fill-up and heating stage, fluctuation curves of the reboiler temperatures with respect to time which are similar to those for conventional distillation columns are observed, while in the equilibration process it is found that the increase of the liquid holdup volume in the condenser reduces the time required to reach steady state for the reactive column and decreases the liquid holdup volume in the reboiler at the equilibrium state. This shows that the liquid holdup volume in the condenser has an important effect on the start-up of reactive distillation columns.

[1]  Günter Wozny,et al.  Analysis of the Start‐up Process for Reactive Distillation , 2003 .

[2]  Rajamani Krishna,et al.  Modelling reactive distillation , 2000 .

[3]  J. W. Lee,et al.  Widening the applicability of reactive distillation technology by using concurrent design , 2004 .

[4]  Milorad P. Dudukovic,et al.  A comparison of the equilibrium and nonequilibrium models for a multicomponent reactive distillation column , 1998 .

[5]  Robert S. Huss,et al.  Multiple steady states in reactive distillation: kinetic effects , 2002 .

[6]  Rafiqul Gani,et al.  A generalized reactive separation unit model. Modelling and simulation aspects , 1998 .

[7]  Rajamani Krishna,et al.  Influence of column hardware on the performance of reactive distillation columns , 2001 .

[8]  Y. H. Jhon,et al.  Dynamic simulation for reactive distillation with ETBE synthesis , 2003 .

[9]  Günter Wozny,et al.  Time optimal start-up strategies for reactive distillation columns , 2004 .

[10]  Rajamani Krishna,et al.  Nonequilibrium modelling of reactive distillation: multiple steady states in MTBE synthesis , 1999 .

[11]  Sten Bay Jørgensen,et al.  Dynamics and control during startup of heat integrated distillation column , 2000 .

[12]  Moses O. Tadé,et al.  Dynamic Simulation of Startup in Ethyl tert-Butyl Ether Reactive Distillation with Input Multiplicity , 2000 .

[13]  Nicolás J. Scenna,et al.  Start-up Operation of Reactive Columns with Multiple Steady States: The Ethylene Glycol Case , 2003 .

[14]  Efstratios N. Pistikopoulos,et al.  Optimal design and control of a high-purity industrial distillation system , 2001 .

[15]  J. A. González-Marcos,et al.  Improvements in batch distillation startup , 1987 .

[16]  Efstratios N. Pistikopoulos,et al.  Optimal design of dynamic systems under uncertainty , 1996 .