Biomass granular screw feeding: An experimental investigation

Abstract Successful feeding is critical to biomass utilization processes, but difficult due to the heterogeneity, physical properties and moisture content of the particles. The objectives of the present study were to find the mechanisms of blockage in screw feeding and to determine the effects of particle mean size (0.5–15 mm), size distribution, shape, moisture content (10–60%), density and compressibility on biomass particle feeding at room temperature. Wood pellets, sawdust, hog fuel and wood shavings were tested in a screw feeder/lock hopper system previously employed to feed sawdust into a pilot-scale circulating fluidized-bed gasifier. Experimental results showed that large particles, wide size distributions, large bulk densities and high moisture contents generally led to larger torque requirements for screw feeding. The “choke section” and seal plug play important roles in determining the torque requirements.

[1]  Lyn Bates.  Guide to the Design, Selection, and Application of Screw Feeders , 2008 .

[2]  L. Bates,et al.  Entrainment Patterns of Screw Hopper Dischargers , 1969 .

[3]  S. Barringer,et al.  Flow property measurement of food powders and sensitivity of Jenike’s hopper design methodology to the measured values , 2004 .

[4]  D. Nelson.  The development of a screw feeder for hogged bark and other wood refuse , 1996 .

[5]  D. Morgan,et al.  Bin-feeder design for reliable flow of hog fuel , 1986 .

[6]  Carl Wilén,et al.  Handling and feeding of biomass to pressurized reactors: Safety engineering , 1993 .

[7]  Sp Babu.  Thermal gasification of biomass technology developments: End of task report for 1992 to 1994 , 1995 .

[8]  Robert C. Brown,et al.  Ancillary equipment for biomass gasification , 2002 .

[9]  J. V. Doorn,et al.  Ten residual biomass fuels for circulating fluidized-bed gasification , 2001 .

[10]  J. R. Kim,et al.  Biomass gasification in a circulating fluidized bed , 2004 .

[11]  B. Kjellström,et al.  Development of a sugar cane residue feeding system for a cyclone gasifier , 1998 .

[12]  J. R. Metcalf.  The Mechanics of the Screw Feeder , 1965 .

[13]  Marco Bortolamasi,et al.  DESIGN AND SIZING OF SCREW FEEDERS , 2001 .

[14]  Hermann J. Feise,et al.  Screw feeders: A guide to selection and use , 2003 .

[15]  Y. Yu,et al.  Theoretical modelling of torque requirements for single screw feeders , 1997 .

[16]  T. R. Mclendon,et al.  High-pressure co-gasification of coal and biomass in a fluidized bed , 2004 .