Measured and predicted energy use and indoor climate before and after a major renovation of an apartment building in Sweden

Abstract This article presents a case study of a renovated Swedish apartment building with a common design built in 1961. The aim is to present numerical predictions, validation and evaluation of energy use and indoor climate for the building before and after renovation. Comprehensive field measurements were carried out before and after the renovation to be used as input data in the building energy simulation tool IDA ICE and for validation of model results. Indoor temperature is predicted with maximum standard deviation of 0.4 °C during winter. Annual heat demand is in good agreement with measurements. The building had an annual climate normalized district heat demand of 99.0 MWh before renovation and 55.4 MWh after, resulting in a 44% reduction. A slight under-prediction of the saving potential is noted, since the indoor air temperature has increased after the renovation. The results also show that assumptions of user behavior have significant impact on the energy-saving potential, and that choice of renovation measures, such as level of insulation, and efficiency of the ventilation heat recovery system need careful consideration. Choice of system boundaries also has a major effect on climate and resource impact from selected renovation measures.

[1]  Tony Roskilly,et al.  This Work Is Licensed under a Creative Commons Attribution 4.0 International License Royapoor M, Roskilly T. Building Model Calibration Using Energy and Environmental Data. Energy and Buildings Building Model Calibration Using Energy and Environmental Data Keywords: Model Calibration Measured Energy , 2022 .

[2]  John B. Shoven,et al.  I , Edinburgh Medical and Surgical Journal.

[3]  Laurent Georges,et al.  Influence of occupant’s behavior on heating needs and energy system performance: A case of well-insulated detached houses in cold climates , 2015 .

[4]  Paul Strachan,et al.  Whole model empirical validation on a full-scale building , 2016 .

[5]  Stefan Lechtenböhmer,et al.  The potential for large-scale savings from insulating residential buildings in the EU , 2011 .

[6]  Itai Danielski.  Large variations in specific final energy use in Swedish apartment buildings : Causes and solutions , 2012 .

[7]  Ove Mørck,et al.  Energy consumption and indoor climate in a residential building before and after comprehensive energy retrofitting , 2016 .

[8]  Martin Morelli,et al.  Energy retrofitting of a typical old Danish multi-family building to a “nearly-zero” energy building based on experiences from a test apartment , 2012 .

[9]  Bahram Moshfegh,et al.  Evaluating indoor environment of a retrofitted multi-family building with improved energy performance in Sweden , 2015 .

[10]  Marco António Pedrosa Santos Ferreira,et al.  Shining examples analysed within the EBC Annex 56 project , 2015 .

[11]  A. M. Aikivuori.  CRITICAL LOSS OF PERFORMANCE - WHAT FAILS BEFORE DURABILITY , 1999 .

[12]  Søren Østergaard Jensen,et al.  Validation of building energy simulation programs: a methodology , 1995 .

[13]  Pieter de Wilde,et al.  The gap between predicted and measured energy performance of buildings: A framework for investigation , 2014 .

[14]  Jan Akander,et al.  Comprehensive investigation on energy retrofits in eleven multi-family buildings in Sweden , 2014 .

[15]  Kevin J. Lomas,et al.  Empirical validation of building energy simulation programs , 1997 .

[16]  T. Agami Reddy,et al.  Literature review on calibration of building energy simulation programs : Uses, problems, procedures, uncertainty, and tools , 2006 .

[17]  Daniel Larsson,et al.  Renovering av flerfamiljsbostäder inom miljonprogrammet ur ett energi- och lönsamhetsperspektiv , 2013 .

[18]  T. Agami Reddy,et al.  Calibrating Detailed Building Energy Simulation Programs with Measured Data—Part I: General Methodology (RP-1051) , 2007 .

[19]  Lars Eriksson,et al.  Whole-building simulation with symbolic DAE equations and general purpose solvers , 2004 .

[20]  Bahram Moshfegh,et al.  Experiences from nine passive houses in Sweden – Indoor thermal environment and energy use , 2014 .

[21]  Rita Streblow,et al.  Energy performance gap in refurbished German dwellings: Lesson learned from a field test , 2016 .

[22]  Giorgio Baldinelli,et al.  Thermal transmittance measurements with the hot box method: Calibration, experimental procedures, an , 2011 .

[23]  Bahram Moshfegh,et al.  Indoor Environment and Energy Use in Historic Buildings - Comparing Survey Results with Measurements and Simulations , 2012 .

[24]  Paul Strachan,et al.  IEA Annex 58: Full-scale Empirical Validation of Detailed Thermal Simulation Programs , 2015 .

[25]  Louise Trygg,et al.  Energy conservation measures in buildings heated by district heating – A local energy system perspective , 2010 .

[26]  Ray Galvin,et al.  Introducing the prebound effect: the gap between performance and actual energy consumption , 2012 .

[27]  Bahram Moshfegh,et al.  Investigation of energy performance of newly built low-energy buildings in Sweden , 2011 .

[28]  Nelson Fumo,et al.  A review on the basics of building energy estimation , 2014 .

[29]  Giorgio Baldinelli,et al.  Evaluating in situ thermal transmittance of green buildings masonries—A case study , 2014 .

[30]  Alo Mikola,et al.  Case-study analysis of concrete large-panel apartment building at pre- and post low-budget energy-renovation , 2016 .

[31]  Emily M. Ryan,et al.  Validation of building energy modeling tools under idealized and realistic conditions , 2012 .

[32]  Paul Raftery,et al.  A review of methods to match building energy simulation models to measured data , 2014 .

[33]  P Pieter-Jan Hoes,et al.  User behavior in whole building simulation , 2009 .

[34]  Kajsa Ellegård,et al.  Models of domestic occupancy, activities and energy use based on time-use data: deterministic and stochastic approaches with application to various building-related simulations , 2012 .