The potential of harakeke fibre as reinforcement in polymer matrix composites including modelling of long harakeke fibre composite strength

Abstract Mechanical properties of aligned long harakeke fibre reinforced epoxy with different fibre contents were evaluated. Addition of fibre was found to enhance tensile properties of epoxy; tensile strength and Young’s modulus increased with increasing content of harakeke fibre up to 223 MPa at a fibre content of 55 wt% and 17 GPa at a fibre content of 63 wt%, respectively. The flexural strength and flexural modulus increased to a maximum of 223 MPa and 14 GPa, respectively, as the fibre content increased up to 49 wt% with no further increase with increased fibre content. The Rule of Mixtures based model for estimating tensile strength of aligned long fibre composites was also developed assuming composite failure occurred as a consequence of the fracture of the lowest failure strain fibres taking account porosity of composites. The model was shown to have good accuracy for predicting the strength of aligned long natural fibre composites.

[1]  C. Santulli,et al.  Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers , 2010 .

[2]  C. Santulli,et al.  Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites , 2010 .

[3]  F. L. Matthews,et al.  Composite Materials : Engineering and Science , 1993 .

[4]  C. Santulli,et al.  Tensile behavior of New Zealand flax (Phormium tenax) fibers , 2010 .

[5]  M. Misra,et al.  Biofibres, biodegradable polymers and biocomposites: An overview , 2000 .

[6]  R. Newman,et al.  Epoxy composites reinforced with deacetylated Phormium tenax leaf fibres , 2007 .

[7]  M. Shibata,et al.  Biodegradable polyester composites reinforced with short abaca fiber , 2002 .

[8]  B. Duchemin,et al.  Treatment of Harakeke fiber for biocomposites , 2009 .

[9]  Mark Battley,et al.  Failure mechanisms in composites reinforced with unidirectional Phormium leaf fibre , 2010 .

[10]  J. Lim,et al.  Fabrication and Mechanical Properties of Completely Biodegradable Hemp Fiber Reinforced Polylactic Acid Composites , 2007 .

[11]  D. Carr,et al.  Fibers from Three Cultivars of New Zealand Flax (Phormium tenax) , 2005 .

[12]  R. Joffe,et al.  Strength distribution of elementary flax fibres , 2005 .

[13]  R. Joffe,et al.  Stiffness and strength of flax fiber/polymer matrix composites , 2006 .

[14]  Mohammad S. Islam,et al.  Influence of alkali fiber treatment and fiber processing on the mechanical properties of hemp/epoxy composites , 2011 .

[15]  J. Kennedy,et al.  Studies on the properties of natural fibers-reinforced thermoplastic starch composites , 2005 .

[16]  B. Madsen,et al.  Physical and mechanical properties of unidirectional plant fibre composites: an evaluation of the influence of porosity , 2003 .

[17]  J. Vincent,et al.  Static and dynamic fracture properties of the leaf of New Zealand flax Phormium tenax (Phormiaceae: Monocotyledones) , 1996, Proceedings of the Royal Society of London. Series B: Biological Sciences.

[18]  Kristiina Oksman,et al.  Morphology and mechanical properties of unidirectional sisal-epoxy composites , 2002 .

[19]  Marie Joo Le Guen,et al.  Pulped Phormium tenax leaf fibres as reinforcement for epoxy composites , 2007 .

[20]  B. Madsen,et al.  Plant fibre composites – porosity and stiffness , 2009 .

[21]  Methods for characterizing plant fibers , 2005, Microscopy research and technique.

[22]  J. Bréard,et al.  Scattering of morphological and mechanical properties of flax fibres , 2010 .

[23]  Changquan Calvin Sun,et al.  True density of microcrystalline cellulose. , 2005, Journal of pharmaceutical sciences.

[24]  Otávio da Fonseca Martins Gomes,et al.  The effect of fiber morphology on the tensile strength of natural fibers , 2013 .

[25]  Ignace Verpoest,et al.  Influence of processing and chemical treatment of flax fibres on their composites , 2001 .

[26]  M. J. King.  Phormium tenax (Agavaceae) leaf anatomy effects on fibre extraction by the Maori haro method , 2003 .

[27]  Kristiina Oksman,et al.  High Quality Flax Fibre Composites Manufactured by the Resin Transfer Moulding Process , 2001 .

[28]  Edwin Bodros,et al.  Study of the tensile properties of stinging nettle fibres (Urtica dioica) , 2008 .

[29]  Yan Li,et al.  Sisal fibre and its composites: a review of recent developments , 2000 .

[30]  D. Carr,et al.  Structural Differences among Fibers from Six Cultivars of Harakeke (Phormium tenax, New Zealand flax) , 2006 .