Extending the High-Voltage Operation of Graphite/NCM811 Cells by Constructing a Robust Electrode/Electrolyte Interphase Layer

[1]  Seung‐Wan Song,et al.  Novel Additives-package to Mitigate the Failure Modes of High-capacity LiNi0.82Co0.11Mn0.07O2-based Lithium-ion Battery , 2022, Chemical Engineering Journal.

[2]  Wengao Zhao,et al.  Assessing Long-Term Cycling Stability of Single-Crystal Versus Polycrystalline Nickel-Rich NCM in Pouch Cells with 6 mAh cm-2 Electrodes. , 2022, Small.

[3]  W. Dong,et al.  Amorphous fluorine glaze for crack-free nickel-rich layered cathode grains under electrochemical cycling , 2022, Chemical Engineering Journal.

[4]  Jiang Zhou,et al.  Unveiling Thermal Decomposition Kinetics of Single-Crystalline Ni-Rich LiNi0.88Co0.07Mn0.05O2 Cathode for Safe Lithium-Ion Batteries , 2022, Chemical Engineering Journal.

[5]  J. Dahn,et al.  Impact of Graphite Materials on the Lifetime of NMC811/Graphite Pouch Cells: Part I. Material Properties, ARC Safety Tests, Gas Generation, and Room Temperature Cycling , 2021, Journal of The Electrochemical Society.

[6]  Wengao Zhao,et al.  In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes , 2021, Nature Communications.

[7]  M. Winter,et al.  Re-evaluating common electrolyte additives for high-voltage lithium ion batteries , 2021, Cell Reports Physical Science.

[8]  Xiulin Fan,et al.  High-voltage liquid electrolytes for Li batteries: progress and perspectives. , 2021, Chemical Society reviews.

[9]  M. Ge,et al.  Hierarchical nickel valence gradient stabilizes high-nickel content layered cathode materials , 2021, Nature Communications.

[10]  Jeremiah A. Johnson,et al.  Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte , 2021, Nature Energy.

[11]  A. Manthiram,et al.  Zinc-Doped High-Nickel, Low-Cobalt Layered Oxide Cathodes for High-Energy-Density Lithium-Ion Batteries. , 2021, ACS applied materials & interfaces.

[12]  M. Engelhard,et al.  Electrolyte Regulating toward Stabilization of Cobalt-Free Ultrahigh-Nickel Layered Oxide Cathode in Lithium-Ion Batteries , 2021 .

[13]  Yi Cui,et al.  Cathode-Electrolyte Interphase in Lithium Batteries Revealed by Cryogenic Electron Microscopy , 2020 .

[14]  Guoying Chen,et al.  Direct Contacting with Liquid Electrolyte Facilitates the Surface Phase Transition in Ni-rich Layered Cathode , 2020, Microscopy and Microanalysis.

[15]  Xing Ou,et al.  Unravelling the influence of quasi single-crystalline architecture on high-voltage and thermal stability of LiNi0.5Co0.2Mn0.3O2 cathode for lithium-ion batteries , 2020 .

[16]  Guoying Chen,et al.  The Role of Secondary Particle Structures in Surface Phase Transitions of Ni-Rich Cathodes , 2020 .

[17]  Kai Wu,et al.  The Roles and Working Mechanism of Salt-Type Additives on the Performance of High-Voltage Lithium-Ion Batteries. , 2020, ACS applied materials & interfaces.

[18]  Ji‐Guang Zhang,et al.  Optimized Al Doping Improves Both Interphase Stability and Bulk Structural Integrity of Ni-Rich NMC Cathode Materials , 2020 .

[19]  Xiaodong Wu,et al.  Insights into the Dual Role of Lithium Difluoro(oxalato)borate Additive in Improving the Electrochemical Performance of NMC811||Graphite Cells , 2020, ACS Applied Energy Materials.

[20]  C. Battaglia,et al.  Stabilizing Capacity Retention in NMC811/Graphite Full Cells via TMSPi Electrolyte Additives , 2019, ACS Applied Energy Materials.

[21]  Rajeev S. Assary,et al.  An extremely durable redox shuttle additive for overcharge protection of lithium-ion batteries , 2019, Materials Today Energy.

[22]  Xifei Li,et al.  Controllable Cathode–Electrolyte Interface of Li[Ni0.8Co0.1Mn0.1]O2 for Lithium Ion Batteries: A Review , 2019, Advanced Energy Materials.

[23]  J. Dahn,et al.  An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries , 2019, Chemistry of Materials.

[24]  Zonghai Chen,et al.  Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes , 2019, Nature Energy.

[25]  Arumugam Manthiram,et al.  A Mg-Doped High-Nickel Layered Oxide Cathode Enabling Safer, High-Energy-Density Li-Ion Batteries , 2019, Chemistry of Materials.

[26]  Siyang Liu,et al.  Understanding the effects of surface modification on improving the high-voltage performance of Ni-rich cathode materials , 2018, Materials Today Energy.

[27]  Ji‐Guang Zhang,et al.  Solid–Liquid Interfacial Reaction Trigged Propagation of Phase Transition from Surface into Bulk Lattice of Ni-Rich Layered Cathode , 2018, Chemistry of Materials.

[28]  Ji‐Guang Zhang,et al.  Revealing Cycling Rate-Dependent Structure Evolution in Ni-Rich Layered Cathode Materials , 2018, ACS Energy Letters.

[29]  H. Girault,et al.  Electrochemical potential window of battery electrolytes: the HOMO–LUMO misconception , 2018 .

[30]  J. Janek,et al.  Chemo-mechanical expansion of lithium electrode materials – on the route to mechanically optimized all-solid-state batteries , 2018 .

[31]  K. Amine,et al.  Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries , 2018, Nature Nanotechnology.

[32]  Ji‐Guang Zhang,et al.  Stable cycling of high-voltage lithium metal batteries in ether electrolytes , 2018, Nature Energy.

[33]  Ji‐Guang Zhang,et al.  High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases , 2018 .

[34]  Ji‐Guang Zhang,et al.  Effect of calcination temperature on the electrochemical properties of nickel-rich LiNi0.76Mn0.14Co0.10O2 cathodes for lithium-ion batteries , 2018, Nano Energy.

[35]  Ji‐Guang Zhang,et al.  Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries , 2018, Nature Energy.

[36]  Ji‐Guang Zhang,et al.  Simultaneous Stabilization of LiNi0.76 Mn0.14 Co0.10 O2 Cathode and Lithium Metal Anode by Lithium Bis(oxalato)borate as Additive. , 2018, ChemSusChem.

[37]  Evan M. Erickson,et al.  From Surface ZrO2 Coating to Bulk Zr Doping by High Temperature Annealing of Nickel‐Rich Lithiated Oxides and Their Enhanced Electrochemical Performance in Lithium Ion Batteries , 2018 .

[38]  Wengao Zhao,et al.  Dual functions of zirconium modification on improving the electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 , 2018 .

[39]  Ji‐Guang Zhang,et al.  Effects of Imide-Orthoborate Dual-Salt Mixtures in Organic Carbonate Electrolytes on the Stability of Lithium Metal Batteries. , 2018, ACS applied materials & interfaces.

[40]  Zonghai Chen,et al.  Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode-Electrolyte Interface in Lithium-Ion Batteries. , 2017, ACS applied materials & interfaces.

[41]  Jaephil Cho,et al.  Mechanisms for electrochemical performance enhancement by the salt-type electrolyte additive, lithium difluoro(oxalato)borate, in high-voltage lithium-ion batteries , 2017 .

[42]  Liu Zhou,et al.  Development of novel lithium borate additives for designed surface modification of high voltage LiNi0.5Mn1.5O4 cathodes , 2016 .

[43]  Samuel S. Cartmell,et al.  Highly Stable Operation of Lithium Metal Batteries Enabled by the Formation of a Transient High‐Concentration Electrolyte Layer , 2016 .

[44]  Terence J. Lozano,et al.  Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes , 2015 .

[45]  J. Dahn,et al.  Effect of Sulfate Electrolyte Additives on LiNi1/3Mn1/3Co1/3O2/Graphite Pouch Cell Lifetime: Correlation between XPS Surface Studies and Electrochemical Test Results , 2014 .

[46]  Xiaoping Li,et al.  Tris(trimethylsilyl)phosphite as electrolyte additive for high voltage layered lithium nickel cobalt manganese oxide cathode of lithium ion battery , 2014 .

[47]  Kang Xu,et al.  Electrolytes and interphases in Li-ion batteries and beyond. , 2014, Chemical reviews.

[48]  Soojin Park,et al.  A multifunctional phosphite-containing electrolyte for 5 V-class LiNi0.5Mn1.5O4 cathodes with superior electrochemical performance , 2014 .

[49]  B. Lucht,et al.  Investigation and application of lithium difluoro(oxalate)borate (LiDFOB) as additive to improve the thermal stability of electrolyte for lithium-ion batteries , 2011 .