论文信息 - Constrained optimization strategies and CAM software for single-pass peripheral milling

Constrained optimization strategies and CAM software for single-pass peripheral milling

Abstract Constrained optimization strategies and computer flow charts for single-pass rough peripheral milling on NC/CNC and conventional machine tools are presented and discussed. Various practical machine tool constraints have been considered, namely the maximum available power, torque and feed force and feed speed and cutting speed limits. The optimization strategies for this common operation have been found to be very complex and require computer assistance. A comparison of handbook recommended and optimal solutions has highlighted the significant benefits of using the latter and the need for minimizing the component loading time and cost to maximize such benefits.

[1] S. M. Wu,et al. Maximum Profit as the Criterion in the Determination of the Optimum Cutting Conditions , 1966 .

[2] E.J.A. Armarego,et al. The maximum profit rate criterion applied to single-pass shaping and milling processes , 1967 .

[3] E. Armarego,et al. The Machining of Metals , 1969 .

[4] Gherman Drǎghici,et al. Calculation by convex mathematical programming of the optimum cutting condition when cylindrical milling , 1974 .

[5] V. A. Ostafiev,et al. Integrated End Milling Optimization Development , 1984 .

[6] Richard A. Wysk,et al. MILLING PARAMETER OPTIMIZATION THROUGH A DISCRETE VARIABLE TRANSFORMATION , 1982 .

[7] Inyong Ham,et al. Regression Analysis for Predicting Surface Finish and Its Application in the Determination of Optimum Machining Conditions , 1970 .

[8] Eja Armarego,et al. Computer Aided Optimization of Machining Conditions in Single Pass Turning Operations , 1986 .

[9] F. W. Taylor. The Art of Cutting Metals , 1907 .

[10] R. E. Goforth,et al. Optimization of the Second Order Logarithmic Machining Economics Problem by Extended Geometric Programming Part I—Unconstrained , 1981 .