Numerical and experimental verification of an inverse‐direct approach for load and strain monitoring in aeronautical structures

[1]  P. Bettini,et al.  Strain field reconstruction on composite spars based on the identification of equivalent load conditions , 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2]  M. Gherlone,et al.  An inverse finite element method for beam shape sensing: theoretical framework and experimental validation , 2014 .

[3]  Xuefei Guan,et al.  An Integrated Health Monitoring Method for Structural Fatigue Life Evaluation Using Limited Sensor Data , 2016, Materials.

[4]  Alexander Tessler,et al.  A least-squares variational method for full-field reconstruction of elastic deformations in shear-deformable plates and shells , 2005 .

[5]  Chin-Hsiung Loh,et al.  Input force identification: Application to soil–pile interaction , 2009 .

[6]  Adnan Kefal,et al.  An efficient curved inverse-shell element for shape sensing and structural health monitoring of cylindrical marine structures , 2019, Ocean Engineering.

[7]  Claudio Sbarufatti,et al.  Definition of a load adaptive baseline by inverse finite element method for structural damage identification , 2019, Mechanical Systems and Signal Processing.

[8]  S. C. Reed,et al.  Development of a parametric-based indirect aircraft structural usage monitoring system using artificial neural networks , 2007, The Aeronautical Journal (1968).

[9]  S. R. Hunt,et al.  Validation of the Eurofighter Typhoon structural health and usage monitoring system , 2001 .

[10]  Toni Kanakis,et al.  Load Monitoring by Means of Optical Fibres and Strain Gages , 2016 .

[11]  Gangbing Song,et al.  A method of pipeline corrosion detection based on hoop‐strain monitoring technology , 2017 .

[12]  Christian Boller,et al.  Health Monitoring of Aerospace Structures , 2003 .

[13]  Gabriele Cazzulani,et al.  A new approach for the evaluation and the improvement of the metrological characteristics of an instrumented wheelset for the measure of wheel–rail contact forces , 2017 .

[15]  Donglin Zou,et al.  Application of augmented Kalman filter to identify unbalance load of rotor-bearing system: Theory and experiment , 2019 .

[16]  Wojciech Zielinski,et al.  Numerical and Experimental UAV Structure Investigation by Pre-Flight Load Test , 2020, Sensors.

[17]  Chun-Gon Kim,et al.  Embedded fiber Bragg grating sensor–based wing load monitoring system for composite aircraft , 2019, Structural Health Monitoring.

[18]  Hirotaka Igawa,et al.  Investigation of Inverse Analysis and Neural Network Approaches for Identifying Distributed Load using Distributed Strains , 2019, TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES.

[19]  Wim Desmet,et al.  Kalman-based load identification and full-field estimation analysis on industrial test case , 2019, Mechanical Systems and Signal Processing.

[20]  Michael D. Todd.  Data Interrogation Approaches with Strain and Load Gauge Sensor Arrays , 2009 .

[21]  Demetrio Cristiani,et al.  On the Evaluation of a Coupled Sequential Approach for Rotorcraft Landing Simulation , 2020, Sensors.

[22]  Ivo Jebáček,et al.  Possibilities and methods of in-flight loading measurement , 2012 .

[23]  Wei Zhang,et al.  Time Domain Strain/Stress Reconstruction Based on Empirical Mode Decomposition: Numerical Study and Experimental Validation , 2016, Sensors.

[24]  Ricardo Atienza,et al.  Structural health and usage monitoring of an unmanned turbojet target drone , 2019 .

[25]  Branko Glisic,et al.  Monitoring of prestressing forces in prestressed concrete structures—An overview , 2019, Structural Control and Health Monitoring.

[26]  Francesco Cadini,et al.  Shape sensing and damage identification with iFEM on a composite structure subjected to impact damage and non-trivial boundary conditions , 2021 .

[27]  S. Delepine-Lesoille,et al.  Non-invasive tunnel convergence measurement based on distributed optical fiber strain sensing , 2019, Smart Materials and Structures.

[28]  Simone A. Ludwig,et al.  Sensor optimization using an evolutionary strategy for structural health monitoring in high temperature environments , 2018, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[29]  Piotr Reymer,et al.  UAV Pre-flight Structural Strength Verification during On-ground Static Load Test , 2019, 2019 IEEE 5th International Workshop on Metrology for AeroSpace (MetroAeroSpace).

[30]  Dongsheng Li,et al.  Pipeline internal corrosion monitoring based on distributed strain measurement technique , 2017 .

[31]  Bijan Samali,et al.  Fibre Bragg grating sensor-based damage response monitoring of an asymmetric reinforced concrete shear wall structure subjected to progressive seismic loads , 2018, Structural Control and Health Monitoring.

[32]  Qian Xu,et al.  Optimal Sensor Placement for Inverse Finite Element Reconstruction of Three-Dimensional Frame Deformation , 2018 .

[33]  Elizabeth Cross,et al.  Prediction of landing gear loads using machine learning techniques , 2012 .