High-speed thermogravimetric analysis of the combustion of wood and Ca-rich fuel

[1]  Hao Zhou,et al.  Ash deposition behavior under coal and wood co-firing conditions in a 300 kW downfired furnace , 2017, Journal of the Energy Institute.

[2]  Jun Li,et al.  Study on the ignition behavior and kinetics of combustion of biomass , 2017 .

[3]  A. Konist,et al.  Investigation of the evolution of sulphur during the thermal degradation of different oil shales , 2017 .

[4]  Tao Zhang,et al.  Investigating co-combustion characteristics of bamboo and wood. , 2017, Bioresource technology.

[5]  A. Burnham.  Porosity and permeability of Green River oil shale and their changes during retorting , 2017 .

[6]  Shiwen Fang,et al.  The investigation of co-combustion of sewage sludge and oil shale using thermogravimetric analysis , 2017 .

[7]  Yuhui Ma,et al.  TG–FTIR study on pyrolysis of waste printing paper , 2017, Journal of Thermal Analysis and Calorimetry.

[8]  Zongliang Zuo,et al.  Thermogravimetric analysis of the biomass pyrolysis with copper slag as heat carrier , 2017, Journal of Thermal Analysis and Calorimetry.

[9]  Xiaoqian Ma,et al.  Characteristics of co-combustion and kinetic study on hydrochar with oil shale: A thermogravimetric analysis , 2017 .

[10]  A. Dalai,et al.  Chemical composition, character and reactivity of renewable fuel ashes , 2016 .

[11]  A. Konist,et al.  Experimental analysis of the combustion characteristics of Estonian oil shale in air and oxy-fuel atmospheres , 2015 .

[12]  J. Bilbao,et al.  Fast characterization of biomass fuels by thermogravimetric analysis (TGA) , 2015 .

[13]  A. Konist,et al.  Low Grade Fuel-Oil Shale and Biomass Co-combustion in CFB Boiler , 2013 .

[14]  M. Martins,et al.  Formulating and optimizing a combustion pathways for oil shale and its semi-coke , 2012 .

[15]  Øyvind Skreiberg,et al.  TGA and macro-TGA characterisation of biomass fuels and fuel mixtures , 2011 .

[16]  Prabir Basu,et al.  Biomass co-firing options on the emission reduction and electricity generation costs in coal-fired power plants , 2011 .

[17]  Michael Plötze,et al.  Porosity and pore size distribution of different wood types as determined by mercury intrusion porosimetry , 2011, European Journal of Wood and Wood Products.

[18]  A. Siirde.  Editor's page. Oil-shale - global solution or part of the problem? , 2008 .

[19]  Gary L. Baughman,et al.  Synthetic fuels data handbook , 2007 .

[20]  Mustafa Versan Kok,et al.  OIL SHALES IN THE WORLD AND TURKEY; RESERVES, CURRENT SITUATION AND FUTURE PROSPECTS: A REVIEW , 2006, Oil Shale.

[21]  Xiumin Jiang,et al.  Thermogravimetric investigation on combustion characteristics of oil shale and high sulphur coal mixture , 2006 .

[22]  Mikko Hupa,et al.  Interaction of fuels in co-firing in FBC , 2005 .

[23]  Firas Awaja,et al.  Characterisation of some Australian oil shale using thermal, X-ray and IR techniques , 2005 .

[24]  D. Vučelič,et al.  Investigation of catalytic effects of indigenous minerals in the pyrolysis of Aleksinac oil shale organic matter , 1992 .

[25]  W. E. Robinson.  Chapter 4 Origin and Characteristics of Green River Oil Shale , 1976 .