Influence of rear surface pyramid base microstructure on industrial n-TOPCon solar cell performances

[1]  D. Macdonald,et al.  Firing stability of phosphorus-doped polysilicon passivating contacts: Factors affecting the degradation behavior , 2022, Solar Energy Materials and Solar Cells.

[2]  R. Brendel,et al.  Firing stability of tube furnace‐annealed n‐type poly‐Si on oxide junctions , 2021, Progress in Photovoltaics: Research and Applications.

[3]  Yuheng Zeng,et al.  Numerical and experimental exploration towards a 26% efficiency rear-junction n-type silicon solar cell with front local-area and rear full-area polysilicon passivated contacts , 2021 .

[4]  S. Glunz,et al.  Design rules for high-efficiency both-sides-contacted silicon solar cells with balanced charge carrier transport and recombination losses , 2021, Nature Energy.

[5]  A. Cuevas,et al.  Polysilicon passivated junctions: The next technology for silicon solar cells? , 2021 .

[6]  H. Guthrey,et al.  Effect of Surface Texture on Pinhole Formation in SiOx-Based Passivated Contacts for High-Performance Silicon Solar Cells. , 2020, ACS applied materials & interfaces.

[7]  D. Young,et al.  On the hydrogenation of Poly-Si passivating contacts by Al2O3 and SiN thin films , 2020 .

[8]  A. Rohatgi,et al.  Fully screen-printed bifacial large area 22.6% N-type Si solar cell with lightly doped ion-implanted boron emitter and tunnel oxide passivated rear contact , 2020 .

[9]  Yi Tan,et al.  Effect of the anisotropy of etching surface morphology on light-trapping and photovoltaic conversion efficiencies of silicon solar cell , 2020 .

[10]  D. Macdonald,et al.  Influence of PECVD deposition temperature on phosphorus doped poly-silicon passivating contacts , 2020 .

[11]  P. Altermatt,et al.  24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design , 2020 .

[12]  Xinyu Zhang,et al.  On the passivation mechanism of poly-silicon and thin silicon oxide on crystal silicon wafers , 2019 .

[13]  Thomas G. Allen,et al.  Passivating contacts for crystalline silicon solar cells , 2019, Nature Energy.

[14]  D. Macdonald,et al.  High efficiency n-type silicon solar cells with passivating contacts based on PECVD silicon films doped by phosphorus diffusion , 2019, Solar Energy Materials and Solar Cells.

[15]  D. Macdonald,et al.  Hydrogenation of Phosphorus-Doped Polycrystalline Silicon Films for Passivating Contact Solar Cells. , 2019, ACS applied materials & interfaces.

[16]  R. Brendel,et al.  Surface passivation of crystalline silicon solar cells: Present and future , 2018, Solar Energy Materials and Solar Cells.

[17]  R. Brendel,et al.  Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells , 2018, Solar Energy Materials and Solar Cells.

[18]  S. Glunz,et al.  Excellent Surface Passivation Quality on Crystalline Silicon Using Industrial‐Scale Direct‐Plasma TOPCon Deposition Technology , 2018 .

[19]  A. Rohatgi,et al.  High efficiency screen-printed n-type silicon solar cell using co-diffusion of APCVD boron emitter and POCl 3 back surface field , 2018 .

[20]  S. Glunz,et al.  n-Type Si solar cells with passivating electron contact: Identifying sources for efficiency limitations by wafer thickness and resistivity variation , 2017 .

[21]  R. Brendel,et al.  On the recombination behavior of p+‐type polysilicon on oxide junctions deposited by different methods on textured and planar surfaces , 2017 .

[22]  Chel-Jong Choi,et al.  Fundamental understanding, impact, and removal of boron-rich layer on n-type silicon solar cells , 2016 .

[23]  M. Werner,et al.  Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers grown by photo-oxidation or wet-chemical oxidation in ozonized water , 2015, 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC).

[24]  Wei Wang,et al.  >23% High-Efficiency Tunnel Oxide Junction Bifacial Solar Cell With Electroplated Cu Gridlines , 2015, IEEE Journal of Photovoltaics.

[25]  E. Bugiel,et al.  Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctions , 2014 .

[26]  Sungeun Park,et al.  Properties of boron-rich layer formed by boron diffusion in n-type silicon , 2014 .

[27]  S. Glunz,et al.  Carrier-selective contacts for Si solar cells , 2014 .

[28]  Chel-Jong Choi,et al.  Chemical etching of boron-rich layer and its impact on high efficiency n-type silicon solar cells , 2012 .

[29]  Keith R. McIntosh,et al.  Recombination at textured silicon surfaces passivated with silicon dioxide , 2009 .

[30]  M. Ishida,et al.  Improvement of Metal–Oxide Semiconductor Interface Characteristics in Complementary Metal–Oxide Semiconductor on Si(111) by Combination of Fluorine Implantation and Long-Time Hydrogen Annealing , 2006 .

[31]  Z. Yu,et al.  Chemical composition of soft vacuum electron beam assisted chemical vapor deposition of silicon nitride/oxynitride films versus substrate temperature , 1989 .

[32]  G. K. Reeves,et al.  Obtaining the specific contact resistance from transmission line model measurements , 1982, IEEE Electron Device Letters.

[33]  Bruce E. Deal,et al.  Dependence of Interface State Density on Silicon Thermal Oxidation Process Variables , 1979 .