Effects of particle grading on properties of silica ceramics prepared by selective laser sintering

[1]  Jia‐Min Wu,et al.  Microstructures and properties of 45S5 bioglass® & BCP bioceramic scaffolds fabricated by digital light processing , 2021 .

[2]  Tim Mueller,et al.  Selective laser sintering in reactive atmospheres: Towards in-situ synthesis of net-shaped carbide and nitride ceramics , 2021 .

[3]  P. Colombo,et al.  Additive manufacturing of silicon carbide by selective laser sintering of PA12 powders and polymer infiltration and pyrolysis , 2021 .

[4]  Sefiu Abolaji Rasaki,et al.  Photopolymerization-based additive manufacturing of ceramics: A systematic review , 2021, Journal of Advanced Ceramics.

[5]  J. Jafferson,et al.  State of the art direct ink writing (DIW) and experimental trial on DIW of HAp bio-ceramics , 2021 .

[6]  Weiqi Wang,et al.  Selective laser sintering of porous Al2O3-based ceramics using both Al2O3 and SiO2 poly-hollow microspheres as raw materials , 2021 .

[7]  Xiaohong Sun,et al.  Dense ceramics with complex shape fabricated by 3D printing: A review , 2021, Journal of Advanced Ceramics.

[8]  B. Zhu,et al.  Design of Concrete Mix Proportion Based on Particle Packing Voidage and Test Research on Compressive Strength and Elastic Modulus of Concrete , 2021, Materials.

[9]  Zhe Zhao,et al.  High performance hydroxyapatite ceramics and a triply periodic minimum surface structure fabricated by digital light processing 3D printing , 2021, Journal of Advanced Ceramics.

[10]  Qingyan Xu,et al.  High-Temperature Mechanical Behaviors of SiO2-Based Ceramic Core for Directional Solidification of Turbine Blades , 2020, Materials.

[11]  Huajun Sun,et al.  Effects of carbon content on microstructure and mechanical properties of SiC ceramics fabricated by SLS/RMI composite process , 2020 .

[12]  E. Levänen,et al.  A comprehensive review of the photopolymerization of ceramic resins used in stereolithography , 2020 .

[13]  R. He,et al.  Additive manufacturing of hydroxyapatite bioceramic scaffolds: Dispersion, digital light processing, sintering, mechanical properties, and biocompatibility , 2020, Journal of Advanced Ceramics.

[14]  Yusheng Shi,et al.  Effects of short carbon fiber on the macro-properties, mechanical performance and microstructure of SiSiC composite fabricated by selective laser sintering , 2020, Ceramics International.

[15]  Chunyang Liu,et al.  Enhanced thermal properties of silica-based ceramic cores prepared by coating alumina/mullite on the surface of fused silica powders , 2020 .

[16]  Yusheng Shi,et al.  Preparation and biological evaluation of ZrO2 all-ceramic teeth by DLP technology , 2020, Ceramics International.

[17]  Shiduo Zhang,et al.  Porous fused silica ceramics prepared by gelcasting using multigrade fused silica powders , 2020, Journal of Alloys and Compounds.

[18]  Shanshan Liu,et al.  Preparation of high-porosity Al2O3 ceramic foams via selective laser sintering of Al2O3 poly-hollow microspheres , 2020 .

[19]  Li Yang,et al.  3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.

[20]  J. Halloran,et al.  Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing , 2019, Journal of the European Ceramic Society.

[21]  Yusheng Shi,et al.  High-performance ceramic parts with complex shape prepared by selective laser sintering: a review , 2018 .

[22]  Qingyan Xu,et al.  Experimental study on mechanical properties of silica-based ceramic core for directional solidification of single crystal superalloy , 2018 .

[23]  Eun‐Hee Kim,et al.  Development of a high-temperature mold process for sand casting with a thin wall and complex shape , 2016 .

[24]  J. Yeo,et al.  Influence of silicon carbide as a mineralizer on mechanical and thermal properties of silica-based ceramic cores , 2016 .

[25]  J. Yeo,et al.  Shrinkage and flexural strength improvement of silica-based composites for ceramic cores by colloidal alumina infiltration , 2016 .

[26]  J. Halloran,et al.  Effect of Cristobalite on the Strength of Sintered Fused Silica Above and Below the Cristobalite Transformation , 2015 .

[27]  L. Hao,et al.  Indirect selective laser sintering of epoxy resin-Al2O3 ceramic powders combined with cold isostatic pressing , 2014 .

[28]  M. Mohammadi,et al.  Effect of zircon content on chemical and mechanical behavior of silica-based ceramic cores , 2014 .

[29]  M. Faghihi-sani,et al.  Investigation on cristobalite crystallization in silica-based ceramic cores for investment casting , 2013 .

[30]  M. Leu,et al.  Effect of material, process parameters, and simulated body fluids on mechanical properties of 13-93 bioactive glass porous constructs made by selective laser sintering. , 2012, Journal of the mechanical behavior of biomedical materials.

[31]  Jean-Pierre Kruth,et al.  Preparation and indirect selective laser sintering of alumina/PA microspheres , 2012 .

[32]  Wei Pan,et al.  Effect of silica sol on the properties of alumina-based ceramic core composites , 2009 .

[33]  E. Santiso,et al.  Dense packing of binary and polydisperse hard spheres , 2002 .