Ultrafast formation of air-processable and high-quality polymer films on an aqueous substrate

[1]  C. Brabec,et al.  Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10% , 2015 .

[2]  J. Durrant,et al.  Oxygen diffusion dynamics in organic semiconductor films , 2015 .

[3]  G. Bazan,et al.  Molecular Packing and Arrangement Govern the Photo-Oxidative Stability of Organic Photovoltaic Materials , 2015 .

[4]  Bumjoon J. Kim,et al.  Nanoimprinting-induced nanomorphological transition in polymer solar cells: enhanced electrical and optical performance. , 2015, ACS nano.

[5]  Weiwei Li,et al.  A real-time study of the benefits of co-solvents in polymer solar cell processing , 2015, Nature Communications.

[6]  A. Heeger,et al.  An Organic Surface Modifier to Produce a High Work Function Transparent Electrode for High Performance Polymer Solar Cells , 2015, Advanced materials.

[7]  Jung‐Yong Lee,et al.  Stable inverted small molecular organic solar cells using a p-doped optical spacer. , 2015, Nanoscale.

[8]  Luping Yu,et al.  Understanding Low Bandgap Polymer PTB7 and Optimizing Polymer Solar Cells Based on It , 2014, Advanced materials.

[9]  Kwanghee Lee,et al.  Efficient Charge Extraction in Thick Bulk Heterojunction Solar Cells through Infiltrated Diffusion Doping , 2014 .

[10]  A. Amassian,et al.  In situ UV-visible absorption during spin-coating of organic semiconductors: a new probe for organic electronics and photovoltaics , 2014 .

[11]  John R. Tumbleston,et al.  Understanding the Morphology of PTB7:PCBM Blends in Organic Photovoltaics , 2014 .

[12]  George F. A. Dibb,et al.  Influence of doping on charge carrier collection in normal and inverted geometry polymer:fullerene solar cells , 2013, Scientific Reports.

[13]  Jung‐Yong Lee,et al.  Enhancing quantum efficiency of parallel-like bulk heterojunction solar cells , 2013 .

[14]  P. E. Keivanidis,et al.  Visualizing charge separation in bulk heterojunction organic solar cells , 2013, Nature Communications.

[15]  Long Ye,et al.  Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells , 2013 .

[16]  Y. Chang,et al.  Conjugated polyelectrolyte and zinc oxide stacked structure as an interlayer in highly efficient and stable organic photovoltaic cells , 2013 .

[17]  A. Heeger,et al.  High‐Efficiency Polymer Solar Cells Enhanced by Solvent Treatment , 2013, Advanced materials.

[18]  G. Robertson,et al.  Degradation mechanism of benzodithiophene-based conjugated polymers when exposed to light in air. , 2012, ACS applied materials & interfaces.

[19]  R. Advíncula,et al.  Nanostructuring polymers, colloids, and nanomaterials at the air–water interface through Langmuir and Langmuir–Blodgett techniques , 2011 .

[20]  David S. Germack,et al.  Molecular order in high-efficiency polymer/fullerene bulk heterojunction solar cells. , 2011, ACS nano.

[21]  Jie Yin,et al.  A butterfly-shaped amphiphilic molecule: solution-transferable and free-standing bilayer films for organic transistors. , 2011, Angewandte Chemie.

[22]  Ye Tao,et al.  Morphology control in polycarbazole based bulk heterojunction solar cells and its impact on device performance , 2011 .

[23]  D. Bradley,et al.  The nature of in-plane skeleton Raman modes of P3HT and their correlation to the degree of molecular order in P3HT:PCBM blend thin films. , 2011, Journal of the American Chemical Society.

[24]  Suren A. Gevorgyan,et al.  Degradation patterns in water and oxygen of an inverted polymer solar cell. , 2010, Journal of the American Chemical Society.

[25]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[26]  C. Brabec,et al.  Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodes , 2009 .

[27]  Vipul Singh,et al.  Enhancement of Transport Characteristics in Poly(3-hexylthiophene) Films Deposited with Floating Film Transfer Method , 2009 .

[28]  J. Manca,et al.  Varying polymer crystallinity in nanofiber poly(3-alkylthiophene): PCBM solar cells: Influence on charge-transfer state energy and open-circuit voltage , 2009 .

[29]  J. Brédas,et al.  Molecular understanding of organic solar cells: the challenges. , 2009, Accounts of chemical research.

[30]  J. Grey,et al.  Resonance chemical imaging of polythiophene/fullerene photovoltaic thin films: mapping morphology-dependent aggregated and unaggregated C=C Species. , 2009, Journal of the American Chemical Society.

[31]  F. C. Krebs.  Fabrication and processing of polymer solar cells: A review of printing and coating techniques , 2009 .

[32]  G. Bazan,et al.  Transition from Solution to the Solid State in Polymer Solar Cells Cast from Mixed Solvents , 2008 .

[33]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[34]  Jenny Nelson,et al.  Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends. , 2008, Nature materials.

[35]  Jun Zhang,et al.  Effect of Initial Polymer Concentration on the Crystallization of Poly (Vinylidene Fluoride)/Poly (Methyl Methacrylate) Blend from Solution Casting , 2007 .

[36]  C. Poulard,et al.  Control of spreading and drying of a polymer solution from Marangoni flows , 2007 .

[37]  Gang Li,et al.  “Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes , 2007 .

[38]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[39]  Donal D. C. Bradley,et al.  A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells , 2006 .

[40]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[41]  Xiaoniu Yang,et al.  Nanoscale morphology of high-performance polymer solar cells. , 2005, Nano letters.

[42]  U. Schubert,et al.  Inkjet printing of well-defined polymer dots and arrays. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[43]  S. Troian,et al.  DYNAMICS OF SPONTANEOUS SPREADING WITH EVAPORATION ON A DEEP FLUID LAYER , 1998 .

[44]  A. Demond,et al.  Estimation of interfacial tension between organic liquids and water , 1993 .

[45]  G. Bennett.  Chemical oxidation: Technologies for the nineties , 1993 .

[46]  Vaidhyanathan Ramamurthy,et al.  Photochemical reactions of organic crystals , 1987 .

[47]  W. F. Reehl,et al.  Handbook of Chemical Property Estimation Methods: Environmental Behavior of Organic Compounds , 1982 .

[48]  P. Benner,et al.  What are the challenges? , 1980, Creating an Effective Public Sector.

[49]  T. Koganezawa,et al.  Thiophene–Thiazolothiazole Copolymers: Significant Impact of Side Chain Composition on Backbone Orientation and Solar Cell Performances , 2014, Advanced materials.

[50]  A. Heeger,et al.  25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation , 2014, Advanced materials.

[51]  Christopher J. Tassone,et al.  A Mechanistic Understanding of Processing Additive‐Induced Efficiency Enhancement in Bulk Heterojunction Organic Solar Cells , 2014, Advanced materials.

[52]  Jae Kwan Lee,et al.  "Columnlike" structure of the cross-sectional morphology of bulk heterojunction materials. , 2009, Nano letters.

[53]  Tai-Horng Young,et al.  Effect of evaporation temperature on the formation of particulate membranes from crystalline polymers by dry-cast process , 2002 .

[54]  R. Deegan,et al.  Pattern formation in drying drops , 2000, Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics.

[55]  W. D. Harkins.  The physical chemistry of surface films , 1952 .