Deformations after heat treatment and their influence on cutting process
暂无分享,去创建一个
Dražan Kozak | Robert Čep | Miroslav Neslušan | Ivan Mrkvica | D. Kozak | M. Neslušan | R. Čep | Ryszard Konderla | Ivan Mrkvica | Ryszard Konderla
[1] Taylan Altan,et al. Effect of tool edge geometry and cutting conditions on experimental and simulated chip morphology in orthogonal hard turning of 100Cr6 steel , 2009 .
[2] Robert E. Green,et al. Nondestructive Methods for Material Property Determination , 1984 .
[3] Hui Song,et al. Thermal modeling for white layer predictions in finish hard turning , 2005 .
[4] Anselmo Eduardo Diniz,et al. Hard turning in continuous and interrupted cut with PCBN and whisker-reinforced cutting tools , 2009 .
[5] Robert Čep,et al. Chip Formation Analysis During Hard Turning , 2008 .
[6] Sung Jung Heo,et al. Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM: stressing four kinds of cemented carbides with PCD tools , 2008 .
[7] B. D. Cullity,et al. A magnetic method for the determination of residual stress , 1971 .
[8] Basim A. Khidhir,et al. Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy , 2010 .
[9] Fritz Klocke,et al. A New Method for Chatter Detection in Grinding , 1999 .