Two dimensional model for multistream plate fin heat exchangers

A model based on finite volume analysis is presented here for multistream plate fin heat exchangers for cryogenic applications. The heat exchanger core is discretised in both the axial and transverse directions. The model accounts for effects of secondary parameters like axial heat conduction through the heat exchanger metal matrix, parasitic heat in-leak from surroundings, and effects of variable fluid properties/metal matrix conductivity. Since the fins are discretised in the transverse direction, the use of a fin efficiency is eliminated and the effects of transverse heat conduction/stacking pattern can be taken care of. The model is validated against results obtained using commercially available software and a good agreement is observed. Results from the developed code are discussed for sample heat exchangers.

[1]  Gadhiraju Venkatarathnam,et al.  Performance of a counter flow heat exchanger with longitudinal heat conduction through the wall separating the fluid streams from the environment , 1999 .

[2]  B. S. V. Prasad,et al.  The Performance Prediction of Multistream Plate-Fin Heat Exchangers Based on Stacking Pattern , 1991 .

[3]  Sunil Sarangi,et al.  Synthesis of multistream heat exchangers by thermally linked two-stream modules , 2010 .

[4]  The effect of variable specific heat of the working fluids on the performance of counterflow heat exchangers , 1984 .

[5]  P. Kroeger,et al.  Performance Deterioration in High Effectiveness Heat Exchangers Due to Axial Heat Conduction Effects , 1967 .

[6]  B.S.V. Prasad,et al.  Differential method for sizing multistream plate fin heat exchangers , 1987 .

[7]  Sorlie.  THREE FLUID HEAT EXCHANGER DESIGN THEORY COUNTER-AND PARALLEL-FLOW (thesis). Technical Report No. 54 , 1962 .

[8]  Sunil Sarangi,et al.  An alternate algorithm for the analysis of multistream plate fin heat exchangers , 2006 .

[9]  G. T. Polley,et al.  Thermal design of multi-stream heat exchangers , 2002 .

[10]  Carlos A. Dorao,et al.  A review on heat exchanger thermal hydraulic models for cryogenic applications , 2011 .

[11]  R. Shah,et al.  Compact Heat Exchangers , 1990 .

[12]  Gadhiraju Venkatarathnam,et al.  Performance degradation due to longitudinal heat conduction in very high NTU counterflow heat exchangers , 1998 .

[13]  L. E. Haseler,et al.  Performance Calculation Methods for Multi-stream Plate-Fin Heat Exchangers , 1981 .

[14]  B. S. V. Prasad,et al.  Differential Methods for the Performance Prediction of Multistream Plate-Fin Heat Exchangers , 1992 .

[15]  On the Performance of High-N/tu Heat Exchangers with Variable Heat Capacity of the Working Fluid , 1991 .

[16]  Sunil Sarangi,et al.  Effect of Flow Maldistribution on Multipassage Heat Exchanger Performance , 1985 .

[17]  S. Kakaç,et al.  Heat Exchangers: Selection, Rating, and Thermal Design , 1997 .

[18]  S. Sarangi,et al.  Effect of temperature-dependent specific heat of the working fluid on the performance of cryogenic regenerators , 1985 .

[19]  Eric M Smith,et al.  Advances in Thermal Design of Heat Exchangers: A Numerical Approach: Direct-sizing, Step-wise rating, and Transients , 1997 .

[20]  Prasanta Kumar Das,et al.  Thermal Design of Multistream Plate Fin Heat Exchangers—A State-of-the-Art Review , 2012 .

[21]  John C. Chato,et al.  Analyses of parallel flow, multi-stream heat exchangers , 1971 .

[22]  M. D. Atrey,et al.  Performance evaluation of counter flow heat exchangers considering the effect of heat in leak and longitudinal conduction for low-temperature applications , 2000 .

[23]  A. London,et al.  Compact heat exchangers , 1960 .

[24]  B.S.V. Prasad.  Fin efficiency and mechanisms of heat exchange through fins in multi-stream plate-fin heat exchangers: development and application of a rating algorithm , 1997 .

[25]  M. Bentwich.  Multistream Countercurrent Heat Exchangers , 1973 .

[26]  Gregory Nellis,et al.  A heat exchanger model that includes axial conduction, parasitic heat loads, and property variations , 2003 .

[27]  B.S.V. Prasad,et al.  Fin efficiency and mechanisms of heat exchange through fins in multi-stream plate-fin heat exchangers: formulation , 1996 .

[28]  R. B. Fleming,et al.  The Effect of Flow Distribution in Parallel Channels of Counterflow Heat Exchangers , 1967 .

[29]  W. Soyars.  The Applicability of Constant Property Analyses in Cryogenic Helium Heat Exchangers , 1994 .

[30]  Jerzy Wolf,et al.  General solution of the equations of parallelflow multichannel heat exchangers , 1964 .

[31]  Sarah Rothstein.  Fundamentals Of Heat Exchanger Design , 2016 .

[32]  Randall F. Barron,et al.  Three-fluid heat exchanger effectiveness , 1967 .

[33]  D. P. Sekulic,et al.  Thermal design theory of three-fluid heat exchangers , 1995 .

[34]  Randall F. Barron,et al.  Effect of Heat Transfer from Ambient on Cryogenic Heat Exchanger Performance , 1984 .

[35]  K. N. Seetharamu,et al.  The effects of longitudinal heat conduction in compact plate-fin and tube-fin heat exchangers using a finite element method , 1997 .

[36]  R. M. Manglik,et al.  Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger , 1995 .

[37]  Sunil Sarangi,et al.  Simulation Algorithm for Multistream Plate Fin Heat Exchangers Including Axial Conduction, Heat Leakage, and Variable Fluid Property , 2007 .

[38]  M. Atrey.  Thermodynamic analysis of collins helium liquefaction cycle , 1998 .

[39]  Sangkwon Jeong,et al.  Effect of flow mal-distribution on effective NTU in multi-channel counter-flow heat exchanger of single body , 2007 .

[40]  A compact solution of the parallel flow three-fluid heat exchanger problem , 1994 .

[41]  J. Chiou,et al.  Review of various Types of Flow Maldistribution in Heat Exchangers , 1988 .

[42]  S. Sarangi,et al.  Performance of Cryogenic Heat Exchangers with Heat Leak from the Surroundings , 1984 .

[43]  Katja Bachmeier,et al.  Numerical Heat Transfer And Fluid Flow , 2016 .