Structure, Morphology, and Surface Chemistry of Surgical Masks and Their Evolution up to 10 Washing Cycles
暂无分享,去创建一个
J. Bluet | J. Penuelas | C. Botella | B. Vacher | F. Grattard | J. Pourchez | L. Leclerc | Paul O. Verhoeven | L. Wittmann | Joseph Garnier | Naomi Sakata | Elisabeth Auzias | M. Dumoulin | Nathanaël Barlier | Théotime Bergese
[1] J. Pourchez,et al. Impact of washing parameters on bacterial filtration efficiency and breathability of community and medical facemasks , 2022, Scientific Reports.
[2] J. Pourchez,et al. Reusability of face masks: Influence of washing and comparison of performance between medical face masks and community face masks , 2022, Environmental Technology & Innovation.
[3] Brigitte L. Arduini,et al. Virucidal N95 Respirator Face Masks via Ultrathin Surface-Grafted Quaternary Ammonium Polymer Coatings , 2022, ACS applied materials & interfaces.
[4] N. Benson,et al. Degradation of plastics associated with the COVID-19 pandemic , 2022, Marine Pollution Bulletin.
[5] E. Piorkowska,et al. Crystallization of Isotactic Polypropylene Nanocomposites with Fibrillated Poly(tetrafluoroethylene) under Elevated Pressure , 2021, Polymers.
[6] O. Dufaud,et al. Impact of washing cycles on the performances of face masks , 2021, Journal of aerosol science.
[7] J. Penuelas,et al. Effect of dry heat treatment between room temperature and 160 °C on surgical masks , 2021, Materials Letters.
[8] P. Cinquin,et al. Reuse of medical face masks in domestic and community settings without sacrificing safety: Ecological and economical lessons from the Covid-19 pandemic , 2021, Chemosphere.
[9] Chavis A. Stackhouse,et al. Reusing Face Covering Masks: Probing the Impact of Heat Treatment , 2021, ACS sustainable chemistry & engineering.
[10] Jérémie Pourchez,et al. Comparison of bacterial filtration efficiency vs. particle filtration efficiency to assess the performance of non-medical face masks , 2021, Scientific Reports.
[11] K. Sopian,et al. Review of the valorization options for the proper disposal of face masks during the COVID-19 pandemic , 2021, Environmental Technology & Innovation.
[12] K. Pielichowski,et al. Characterization and Combustion Behavior of Single-Use Masks Used during COVID-19 Pandemic , 2021, Materials.
[13] C. Crespo,et al. Study of Recycling Potential of FFP2 Face Masks and Characterization of the Plastic Mix-Material Obtained. A Way of Reducing Waste in Times of Covid-19 , 2021, Waste and Biomass Valorization.
[14] M. Andreae,et al. Face masks effectively limit the probability of SARS-CoV-2 transmission , 2021, Science.
[15] F. J. García-Cobos,et al. The recycling of surgical face masks as sound porous absorbers: Preliminary evaluation , 2021, The Science of the total environment.
[16] M. Saberian,et al. Preliminary evaluation of the feasibility of using polypropylene fibres from COVID-19 single-use face masks to improve the mechanical properties of concrete , 2021, Journal of Cleaner Production.
[17] C. Dybas. Surgical masks on the beach: COVID-19 and marine plastic pollution , 2021 .
[18] S. Navaratnam,et al. Environmental challenges induced by extensive use of face masks during COVID-19: A review and potential solutions , 2021, Environmental Challenges.
[19] Justin L. West,et al. Polymer, Additives, and Processing Effects on N95 Filter Performance , 2021 .
[20] A. Montal,et al. Decontamination and re-use of surgical masks and respirators during the COVID-19 pandemic , 2020, International Journal of Infectious Diseases.
[21] Y. Meng,et al. KN95 and N95 Respirators Retain Filtration Efficiency despite a Loss of Dipole Charge during Decontamination , 2020, ACS applied materials & interfaces.
[22] Yoon‐Kyoung Cho,et al. Photoactive Antiviral Face Mask with Self-Sterilization and Reusability. , 2020, Nano letters.
[23] Lynne Peeples. Face masks: what the data say , 2020, Nature.
[24] Yijun Fu,et al. Design of Polypropylene Electret Melt Blown Nonwovens with Superior Filtration Efficiency Stability through Thermally Stimulated Charging , 2020, Polymers.
[25] Jiří Jaromír Klemeš,et al. The energy and environmental footprints of COVID-19 fighting measures – PPE, disinfection, supply chains , 2020, Energy.
[26] A. Tcharkhtchi,et al. An overview of filtration efficiency through the masks: Mechanisms of the aerosols penetration , 2020, Bioactive Materials.
[27] R. McIntyre,et al. Impact of COVID-19 pandemic on mental health in the general population: A systematic review , 2020, Journal of Affective Disorders.
[28] Kangyi Zhang,et al. Face Masks in the New COVID-19 Normal: Materials, Testing, and Perspectives , 2020, Research.
[29] M. F. Bashir,et al. A brief review of socio-economic and environmental impact of Covid-19 , 2020, Air Quality, Atmosphere & Health.
[30] Jamie Grant,et al. Face Masks and Respirators in the Fight Against the COVID-19 Pandemic: A Review of Current Materials, Advances and Future Perspectives , 2020, Materials.
[31] T. A. Aragaw. Surgical face masks as a potential source for microplastic pollution in the COVID-19 scenario , 2020, Marine Pollution Bulletin.
[32] Michael Klompas,et al. Airborne Transmission of SARS-CoV-2: Theoretical Considerations and Available Evidence. , 2020, JAMA.
[33] Dan Wang,et al. Can Masks Be Reused After Hot Water Decontamination During the COVID-19 Pandemic? , 2020, Engineering.
[34] D. Pui,et al. Evaluation of decontamination methods for commercial and alternative respirator and mask materials – view from filtration aspect , 2020, Journal of Aerosol Science.
[35] Jaeyun Lee,et al. Reusability Comparison of Melt-Blown vs Nanofiber Face Mask Filters for Use in the Coronavirus Pandemic , 2020, ACS applied nano materials.
[36] Qifa Song,et al. Decontamination of surgical face masks and N95 respirators by dry heat pasteurization for one hour at 70°C , 2020, American Journal of Infection Control.
[37] C. Donskey,et al. Steam treatment for rapid decontamination of N95 respirators and medical face masks , 2020, American Journal of Infection Control.
[38] S. Chu,et al. Can N95 Respirators Be Reused after Disinfection? How Many Times? , 2020, ACS nano.
[39] Shankar Ghosh,et al. Recharging and rejuvenation of decontaminated N95 masks , 2020, Physics of fluids.
[40] C. Donskey,et al. It's not the heat, it's the humidity: Effectiveness of a rice cooker-steamer for decontamination of cloth and surgical face masks and N95 respirators , 2020, American Journal of Infection Control.
[41] Dana Mackenzie,et al. Reuse of N95 Masks , 2020, Engineering.
[42] Gangjin Chen,et al. Study on correlation of filtration performance and charge behavior and crystalline structure for melt-blown polypropylene electret fabrics , 2015 .
[43] H. Hantsche. High resolution XPS of organic polymers, the scienta ESCA300 database. By G. Beamson and D. Briggs, Wiley, Chichester 1992, 295 pp., hardcover, £ 65.00, ISBN 0‐471‐93592‐1 , 1993 .
[44] Peter N. Ciesielski,et al. Filtration Performance of Layering Masks and Face Coverings and the Reusability of Cotton Masks after Repeated Washing and Drying , 2021, Aerosol and Air Quality Research.