Effects of composite processing methods on wood particle development and length distribution: consequences on mechanical properties of wood-thermoplastic composites.

The relationship between structure and properties of high-density polyethylene (HDPE) filled with wood particles and processing techniques—injection molding, compression molding, and extrusion—was investigated. Wood particles were hammer-milled, sieved, and compounded into pellets at 35% by weight with HDPE using a twin-screw extruder. Coupling agent (ethylene-maleic anhydride copolymer) was added at 2% by wood filler weight. The pellets were used to produce test samples using the three processing techniques. The sensitivity of jack pine and several other wood particles (eastern white cedar, black spruce, and jack pine bark) to composite processing was analyzed. Bark particles showed higher propensity to generate fines than wood particles, possibly because of a higher thermal sensitivity. The major reduction in mean particle length was found to occur in the compounding process. Extrusion and injection molding contributed to particle length reduction to a lesser extent. Conversely, compression molding did not cause significant damage to wood particles. Stiffness and strength increased linearly with weight-averaged length.

[1]  Robert J. Ross,et al.  Wood handbook : wood as an engineering material , 2010 .

[2]  E. Gamstedt,et al.  Stiffness Contribution of Various Wood Fibers to Composite Materials , 2006 .

[3]  Qinglin Wu,et al.  Wood‐fiber/high‐density‐polyethylene composites: Coupling agent performance , 2005 .

[4]  L. Matuana,et al.  Effect of processing method on surface and weathering characteristics of wood–flour/HDPE composites , 2004 .

[5]  A. Błędzki,et al.  Wood Fiber Reinforced Polypropylene Composites: Compression and Injection Molding Process , 2004 .

[6]  Shashank Gulabchand Kasliwal,et al.  Gentle compounding of natural fiber filled PVC composites , 2004 .

[7]  Chul B. Park,et al.  Processing/structure/property relationships for artificial wood made from stretched PP/wood‐fiber composites , 2004 .

[8]  A. Błędzki,et al.  Wood Fibre Reinforced Polypropylene Composites: Effect of Fibre Geometry and Coupling Agent on Physico-Mechanical Properties , 2003 .

[9]  L. Nicolais,et al.  Effect of processing conditions on mechanical and viscoelastic properties of biocomposites , 2003 .

[10]  Hiroshi Suzuki.  Probabilistic Study of Visible Length of Fibers under the Surface of a Short Fiber Reinforced Composite , 2003 .

[11]  T. Osswald,et al.  Analysis of fiber damage mechanisms during processing of reinforced polymer melts , 2002 .

[12]  X. Chen,et al.  On the Effects of Fiber Length and Spatial Distribution on the Stiffness of Short-Fiber Reinforced Composites , 2002 .

[13]  U. Yilmazer,et al.  Effects of processing conditions on the fiber length distribution and mechanical properties of glass fiber reinforced nylon-6 , 2002 .

[14]  Y. Mai,et al.  Mechanical properties of wood flake–polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviour , 2001 .

[15]  A. McDonald,et al.  Influence of fiber length on the mechanical properties of wood-fiber/polypropylene prepreg sheets , 2001 .

[16]  Xiao Hu,et al.  Characterization of fiber length distribution of short-fiber reinforced thermoplastics , 2001 .

[17]  J. Kenny,et al.  Processing of short-fiber reinforced polypropylene. I. Influence of processing conditions on the morphology of extruded filaments , 2000 .

[18]  A. J. Giacomin,et al.  Dynamic Fracture Toughness of Cellulose-Fiber-Reinforced Polypropylene: Preliminary Investigation of Microstructural Effects , 1999 .

[19]  Xiao Hu,et al.  EFFECTS OF FIBER LENGTH AND ORIENTATION DISTRIBUTIONS ON THE MECHANICAL PROPERTIES OF SHORT-FIBER-REINFORCED POLYMERS , 1999 .

[20]  R. Seth,et al.  Measurement of fiber length, coarseness, and shape with the fiber quality analyzer , 1999 .

[21]  J. Balatinecz,et al.  A comparison of compounding processes for wood‐fiber/thermoplastic composites , 1997 .

[22]  Bernd Lauke,et al.  Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers , 1996 .

[23]  P. Andersen,et al.  Experimental Studies for Optimizing Screw and Die Design When Compounding Fiberglass Strand on the Co-Rotating Twin Screw Extruder , 1993 .

[24]  D. Bigg.  Effect of compounding on the properties of short fiber reinforced injection moldable thermoplastic composites , 1985 .

[25]  H. A. Smith,et al.  Forest products laboratory. , 1922 .

[26]  P. G..  The Mechanical Properties of Wood , 1915, Nature.