Carburizing of zirconium using a low energy Mather type plasma focus

[1]  G. Murtaza,et al.  Plasma focus assisted carburizing of aluminium , 2009 .

[2]  H. Chuaqui,et al.  High energy ion beam irradiation on titanium substrate in a pulsed plasma device operating with methane , 2009 .

[3]  D. Kim,et al.  Effect of H2 dilution gas on the growth of ZrC during low pressure chemical vapor deposition in the ZrCl4–CH4–Ar system , 2008 .

[4]  G. Murtaza,et al.  Deposition of diamond-like carbon film using dense plasma focus , 2007 .

[5]  G. Murtaza,et al.  Influence of the filling gas on plasma focus assisted diamondlike carbon coating at room temperature , 2007 .

[6]  M. Sadiq,et al.  Enhanced Crystallinity of PTFE by Ion Irradiation in a Dense Plasma Focus , 2007 .

[7]  R. Rawat,et al.  Nano-structured Fe thin film deposition using plasma focus device , 2006 .

[8]  H. Chuaqui,et al.  Experimental studies of ion beam anisotropy in a low energy plasma focus operating with methane , 2006 .

[9]  J. Costantini,et al.  Thermal annealing study of swift heavy-ion irradiated zirconia , 2006, cond-mat/0609397.

[10]  T. Dekorsy,et al.  Carbon ion implantation into aluminium: Mechanical and tribological properties , 2006 .

[11]  V. Craciun,et al.  Epitaxial ZrC thin films grown by pulsed laser deposition , 2006 .

[12]  M. Sadiq,et al.  Enhanced and reproducible neutron emission from a plasma focus with pre-ionization induced by depleted uranium (U238) , 2006 .

[13]  Paul K. Chu,et al.  Characterization of amorphous and nanocrystalline carbon films , 2006 .

[14]  S. Mohanty,et al.  Development of Multi Faraday Cup Assembly for Ion Beam Measurements from a Low Energy Plasma Focus Device , 2005 .

[15]  H. Chuaqui,et al.  Ion beam emission in a low energy plasma focus device operating with methane , 2005 .

[16]  Chengming Li,et al.  Carburising of steel AISI 1010 by using a cathode arc plasma process , 2004 .

[17]  Z. Chi,et al.  Characterization of an ion irradiation induced phase transformation in monoclinic zirconia , 2004 .

[18]  R. Rawat,et al.  Shadowgraphic studies of DLC film deposition process in dense plasma focus device , 2003, IEEE Transactions on Plasma Science.

[19]  B. Levenfeld,et al.  Magnetic properties of Mg-ferrite after milling process , 2003 .

[20]  T. White,et al.  Deposition of titanium nitride thin films on stainless steel—AISI 304 substrates using a plasma focus device , 2003 .

[21]  S. Neuville.  The enhancement of interconnected sp3 sites by chemical effects during ta-C film growth , 2002 .

[22]  M. Inoue,et al.  NOVEL REACTIVE PLASMA PROCESSING FOR TRANSFORMING SURFACES OF METALS AND INTERMETALLICS TO CERAMICS , 2002 .

[23]  P. Schaaf,et al.  EXAFS investigation of laser nitridation and laser carburization of silicon , 2002 .

[24]  C. Andreazza-Vignolle,et al.  Excimer laser induced plasma for aluminum alloys surface carburizing , 2002 .

[25]  G. Cavallaro,et al.  Characterization of aluminium surfaces with and without plasma nitriding by X-ray photoelectron spectroscopy , 2001 .

[26]  H. Xie,et al.  A phenomenological approach for the Id/Ig ratio and sp3 fraction of magnetron sputtered a-C films , 2000 .

[27]  Dorota Temple,et al.  Recent progress in field emitter array development for high performance applications , 1999 .

[28]  Xiaoming He,et al.  Structural characteristics and hardness of zirconium carbide films prepared by tri-ion beam-assisted deposition , 1998 .

[29]  K. Kitahama,et al.  Carbonization and/or Nitridation of Titanium and Zirconium for Increasing Melting Temperature , 1998 .

[30]  K. Han,et al.  Quantitative phase analysis in tetragonal-rich tetragonal/monoclinic two phase zirconia by Raman spectroscopy , 1997 .

[31]  J. Feugeas,et al.  The thermal evolution of targets under plasma focus pulsed ion implantation , 1997 .

[32]  M. Iwaki,et al.  Crystal structure of carbon-implanted Group 4 transition metals , 1996 .

[33]  Wenzhi Li,et al.  Diamond‐like carbon film synthesized by ion beam assisted deposition and its tribological properties , 1996 .

[34]  W. Mackie,et al.  Field emission from carbide film cathodes , 1995 .

[35]  D. J. Varacalle,et al.  Vacuum plasma sprayed zirconium carbide coatings , 1994 .

[36]  M. Tamor,et al.  Raman ``fingerprinting'' of amorphous carbon films , 1994 .

[37]  T. Mäntylä,et al.  Reactive magnetron sputtering of zirconium carbide films using Ar-CH4 gas mixtures , 1993 .

[38]  R. Springer,et al.  Low-temperature deposition of ZrC thin films from a single source precursor , 1992 .

[39]  K. H. Kwek,et al.  Effect of targets on plasma focus dynamics , 1990 .

[40]  R. Sinclair,et al.  Metastable Phase Formation in Thin Films and Multilayers , 1990 .

[41]  F. D. Boer.  Cohesion in Metals: Transition Metal Alloys , 1989 .

[42]  J. Lue,et al.  Annealing of ion-implanted silicon by a dense plasma focus , 1983, IEEE Electron Device Letters.

[43]  H. Schmidt,et al.  Time-resolved studies of deuteron beams emitted from a plasma focus , 1981 .

[44]  K. Enke,et al.  Some new results on the fabrication of and the mechanical, electrical and optical properties of i-carbon layers☆ , 1981 .

[45]  J. Mather,et al.  CHARACTERISTICS OF THE DENSE PLASMA FOCUS DISCHARGE. , 1968 .

[46]  E. Storms.  The Refractory carbides , 1967 .