The Corrosion Resistance Behaviors of Metallic Bipolar Plates for PEMFC Coated with Physical Vapor Deposition (PVD): An Experimental Study

[1]  F. Dundar,et al.  Expanded Graphite–Epoxy–Flexible Silica Composite Bipolar Plates for PEM Fuel Cells , 2014 .

[2]  M. Ger,et al.  The study of electroplating trivalent CrC alloy coatings with different current densities on stainless steel 304 as bipolar plate of proton exchange membrane fuel cells , 2014 .

[3]  C. Lee,et al.  Electrically conductive polymer composite coating on aluminum for PEM fuel cells bipolar plate , 2013 .

[4]  Young Soo Yoon,et al.  Corrosion and electrical properties of CrN- and TiN-coated 316L stainless steel used as bipolar plates for polymer electrolyte membrane fuel cells , 2013 .

[5]  Davi Gabriel Lopes,et al.  Technical and economic analysis of a power supply system based on ethanol reforming and PEMFC , 2012 .

[6]  Amir H. Shamekhi,et al.  Dynamic modelling and simulation of a polymer electrolyte membrane fuel cell used in vehicle considering heat transfer effects , 2012 .

[7]  Ramin Roshandel,et al.  SIMULATION OF AN INNOVATIVE FLOW-FIELD DESIGN BASED ON A BIO INSPIRED PATTERN FOR PEM FUEL CELLS , 2012 .

[8]  Shunlun He,et al.  Protective graphite coating on metallic bipolar plates for PEMFC applications , 2012 .

[9]  M. Ger,et al.  Analysis of the Corrosion Behavior of Al Alloy Bipolar Plate for Proton Exchange Membrane Fuel Cell (PEMFC) Under Operating Thermal Conditions , 2012 .

[10]  Lu Guo,et al.  TiN-coated titanium as the bipolar plate for PEMFC by multi-arc ion plating , 2011 .

[11]  S. Valeri,et al.  Nanostructured self-lubricating CrN-Ag films deposited by PVD arc discharge and magnetron sputtering , 2011 .

[12]  Juncai Sun,et al.  Corrosion resistance and interfacial contact resistance of TiN coated 316L bipolar plates for proton exchange membrane fuel cell , 2011 .

[13]  Jianlu Zhang,et al.  Effects of Hardware Design and Operation Conditions on PEM Fuel Cell Water Flooding , 2010 .

[14]  M. Koç,et al.  Corrosion resistance characteristics of stamped and hydroformed proton exchange membrane fuel cell metallic bipolar plates , 2010 .

[15]  Yean-Der Kuan,et al.  Experimental study on the characterization of airflow effect on the direct methanol fuel cell , 2009 .

[16]  D. Northwood,et al.  Effect of substrate material on the corrosion of TiN-coated stainless steels in simulated anode and cathode environments of proton exchange membrane fuel cells , 2009 .

[17]  K. Reifsnider,et al.  Evaluation of coated metallic bipolar plates for polymer electrolyte membrane fuel cells , 2008 .

[18]  Jenn-Jiang Hwang,et al.  Corrosion and electrical properties of multi-layered coatings on stainless steel for PEMFC bipolar plate applications , 2007 .

[19]  Yan Wang,et al.  An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells , 2007 .

[20]  A. Iversen.  Stainless steels in bipolar plates—Surface resistive properties of corrosion resistant steel grades during current loads , 2006 .

[21]  H. Wang,et al.  Corrosion Protection of Metallic Bipolar Plates for Fuel Cells , 2006 .

[22]  Wan Ramli Wan Daud,et al.  Challenges and future developments in proton exchange membrane fuel cells , 2006 .

[23]  Allen M. Hermann,et al.  Bipolar plates for PEM fuel cells: A review , 2005 .

[24]  EunAe Cho,et al.  Performance of a 1 kW-class PEMFC stack using TiN-coated 316 stainless steel bipolar plates , 2005 .

[25]  Suzhen Luo,et al.  Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments , 2004 .

[26]  Karren L. More,et al.  Preferential thermal nitridation to form pin-hole free Cr-nitrides to protect proton exchange membrane fuel cell metallic bipolar plates , 2004 .

[27]  W. Kout,et al.  Bipolar plates for PEM fuel cells , 2003 .

[28]  Heli Wang,et al.  Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells , 2003 .

[29]  Viral S. Mehta,et al.  Review and analysis of PEM fuel cell design and manufacturing , 2003 .

[30]  Da-yung Wang,et al.  Microstructure analyses of CrN coating synthesized by a hybrid PVD and metal-plasma ion implantation process , 2002 .

[31]  M. Yoshimura,et al.  Corrosion of stainless steel coated with TiN, (TiAl)N and CrN in aqueous environments , 2002 .

[32]  J. Wind,et al.  Metallic bipolar plates for PEM fuel cells , 2002 .

[33]  A. Cunha,et al.  Performance of chromium nitride based coatings under plastic processing conditions , 2000 .

[34]  D. Mahajan,et al.  Metal bipolar plates for PEM fuel cell—A review , 2007 .

[35]  D. A. Shores,et al.  Evaluation of materials for bipolar plates in PEMFCs , 2000 .