Measurement science research needs for premise plumbing systems
暂无分享,去创建一个
Andrew K. Persily | William M. Healy | Natascha Milesi Ferretti | Tania Ullah | David Yashar | A. Persily | D. Yashar | W. Healy | Natascha Milesi Ferretti | T. Ullah
[1] M J Orloski. Performance criteria and plumbing system design , 1978 .
[2] Joanne R. Debelius,et al. Water supply and drainage in buildings , 1979 .
[3] D. Lytle,et al. Impact of water quality on chlorine demand of corroding copper. , 2016, Water research.
[4] Amy Pruden,et al. Opportunistic Premise Plumbing Pathogens: Increasingly Important Pathogens in Drinking Water , 2015, Pathogens.
[5] Alaa-Eldin M. Abd-Elaal,et al. Improvement of plumbing systems performance using looped water pipe networks within buildings , 2018 .
[6] A. Whelton,et al. Contaminant Migration From Polymeric Pipes Used in Buried Potable Water Distribution Systems: A Review , 2013 .
[7] Ow Us Epa. Basic Information about Lead in Drinking Water , 2016 .
[8] E. J. Pieterse-Quirijns,et al. Modeling temperature in the drinking water distribution system , 2013 .
[9] Robert Pickering,et al. Measurement Science Roadmap Workshop for Water Use Efficiency and Water Quality in Premise Plumbing Systems, August 1-2, 2018: Synthesis of a Workshop organized by the National Institute of Standards and Technology, U.S. Environmental Protection Agency, a , 2018 .
[10] William M. Healy,et al. An assessment of efficient water heating options for an all-electric single family residence in a mixed-humid climate , 2016, Energy and buildings.
[11] Richard N. Wright. BUILDING AND FIRE RESEARCH AT NBS/NIST 1975-2000 , 2003 .
[12] R. Clark. USEPA’s Distribution System Water Quality Modeling Program: A Historical Perspective , 2015 .
[13] Randi H. Brazeau,et al. Role of Hot Water System Design on Factors Influential to Pathogen Regrowth: Temperature, Chlorine Residual, Hydrogen Evolution, and Sediment. , 2013, Environmental engineering science.
[14] Amy Pruden,et al. Survey of green building water systems reveals elevated water age and water quality concerns , 2016 .
[15] Robert M. Clark,et al. The USEPA's distribution system water quality modelling program: a historical perspective , 2015 .
[16] Sasha Schück. Water Age in Residential Premise Plumbing , 2018 .
[17] George C Whipple,et al. Recommended minimum requirements for plumbing in dwellings and similar buildings :: final report of subcommittee on plumbing of the building code committee July 3, 1923 , 1924 .
[18] Buchberger. Residential Water and Energy Savings in Right-Sized Premise Plumbing: , 2018 .
[19] P. Mayer. Residential End Uses of Water , 1999 .
[20] K. Pieper,et al. Corrosion of upstream metal plumbing components impact downstream PEX pipe surface deposits and degradation. , 2019, Chemosphere.
[21] Roy B Hunter. Methods of estimating loads in plumbing systems , 1940 .
[22] Modeling of Dispersion Effect for Intermittent Flow in Premise Plumbing Systems , 2018 .
[23] Sérgio T. Coelho,et al. Modeling of Chlorine Decay in Drinking Water Supply Systems Using EPANET MSX , 2014 .
[24] T. Ullah,et al. The Performance of an Auxiliary Heat Pump Water Heater Installed in a Dual-Tank System in a Net-Zero Energy Residence | NIST , 2016 .
[25] M. V. van Loosdrecht,et al. Biological Stability of Drinking Water: Controlling Factors, Methods, and Challenges , 2016, Front. Microbiol..
[26] W. B. Solley,et al. Estimated use of water in the United States in 1990 , 1993 .
[27] J. Vreeburg,et al. Development and validation of a drinking water temperature model in domestic drinking water supply systems , 2017 .
[28] J. P. van der Hoek,et al. Drinking Water Temperature Modelling in Domestic Systems , 2014 .