Preparation and high temperature oxidation resistance of laser deposited Ti5Si3/MoSi2/Mo5Si3 reinforced α-Ti/NiTi composite coatings

[1]  Yan-qiang Qiao,et al.  Microstructure and oxidation behaviors at 800°C and 1250°C of MoSi2/ReSi2/NbSi2 compound coating prepared by electrodeposition and then pack cementation , 2019, Ceramics International.

[2]  J. Li,et al.  Effects of the content of MoS2 on microstructural evolution and wear behaviors of the laser-clad coatings , 2019, Surface and Coatings Technology.

[3]  Zhi-Cheng Feng,et al.  Microstructure and high temperature reciprocating sliding wear properties of MoSi2/TiC/γ-Ni composite coating in-situ synthesized by co-axial powder feeding plasma transferred arc cladding , 2019, Tribology International.

[4]  R. Tu,et al.  Laser in-situ synthesizing Ti5Si3/Al3Ni2 reinforced Al3Ti/NiTi composite coatings: Microstructure, mechanical characteristics and oxidation behavior , 2019, Optics & Laser Technology.

[5]  Yong Pan,et al.  Insight into the oxidation mechanism of MoSi2: Ab-initio calculations , 2018, Ceramics International.

[6]  S. Palanisamy,et al.  A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder , 2018, Materials Letters.

[7]  H. Kleebe,et al.  Understanding the oxidation behavior of a ZrB2–MoSi2 composite at ultra-high temperatures , 2018, Acta Materialia.

[8]  Suwen Liu,et al.  Effect of molybdenum on the high-temperature properties of TiC-TiB2 reinforced Fe-based composite laser cladding coatings , 2018 .

[9]  Dezhi Wang,et al.  High temperature oxidation and microstructure of MoSi 2 /MoB composite coating for Mo substrate , 2017 .

[10]  T. Troczynski,et al.  Comparative studies of the oxidation of MoSi2 based materials: Low-temperature oxidation (300–900 °C) , 2017 .

[11]  Swarup Bag,et al.  Influence of pulsation in thermo-mechanical analysis on laser micro-welding of Ti6Al4V alloy , 2017 .

[12]  Jun Li,et al.  High-temperature wear and oxidation behaviors of TiNi/Ti 2 Ni matrix composite coatings with TaC addition prepared on Ti6Al4V by laser cladding , 2017 .

[13]  F. Quintero,et al.  Laser cladding of phosphor bronze , 2017 .

[14]  Jiansong Zhou,et al.  Effect of copper molybdate on the lubricating properties of NiCrAlY laser clad coating at elevated temperatures , 2017 .

[15]  Xin Lin,et al.  Microstructure and high temperature oxidation resistance of Ti-Ni gradient coating on TA2 titanium alloy fabricated by laser cladding , 2016 .

[16]  Ye-hua Jiang,et al.  Microstructure and high temperature oxidation resistance of in-situ synthesized TiN/Ti3Al intermetallic composite coatings on Ti6Al4V alloy by laser cladding process , 2016 .

[17]  J. Kang,et al.  Effect of starting materials on the wear performance of NiTi-based composites , 2015 .

[18]  A. Wang,et al.  Laser alloying of Ti–Si compound coating on Ti–6Al–4V alloy for the improvement of bioactivity , 2014 .

[19]  F. Weng,et al.  Research status of laser cladding on titanium and its alloys: A review , 2014 .

[20]  Yuan-Fu Liu,et al.  Microstructure and dry sliding wear behavior of plasma transferred arc clad Ti5Si3 reinforced intermetallic composite coatings , 2014 .

[21]  L. Qi,et al.  Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti–6Al–4V alloy , 2014 .

[22]  S. Jiao,et al.  Electrochemical synthesis of Ti5Si3 in CaCl2 melt , 2014 .

[23]  P. Boulet,et al.  Linear Thermal Expansion Coefficients of Higher Manganese Silicide Compounds , 2014 .

[24]  Jiang Xu,et al.  Novel high damage-tolerant, wear resistant MoSi2-based nanocomposite coatings , 2013 .

[25]  J. Guilemany,et al.  An overview of intermetallics research and application: Status of thermal spray coatings , 2013 .

[26]  B. Tang,et al.  Effects of plasma nitriding and multiple arc ion plating TiN coating on bacterial adhesion of commercial pure titanium via in vitro investigations , 2012 .

[27]  Yongjun Huang.  Characterization of dilution action in laser-induction hybrid cladding , 2011 .

[28]  L. Ceschini,et al.  A comparative study of the tribological behaviour of PVD coatings on the Ti-6Al-4V alloy , 2011 .

[29]  N. Chen,et al.  In situ formation of MoSi2/SiC composite coating on pure Al by laser cladding , 2003 .

[30]  M. Sohi,et al.  Microstructural and physical properties of titanium nitride coatings produced by CVD process , 2000 .