Effect of interface type on the static and dynamic mechanical properties of 3D braided SiCf/SiC composites

[1]  R. Luo,et al.  Effect of fiber directionality on the static and dynamic mechanical properties of 3D SiCf/SiC composites , 2016 .

[2]  Xingui Zhou,et al.  Mechanical properties of SiCf/SiC composites with PyC and the BN interface , 2015 .

[3]  You Zhang,et al.  Effect of structure of pyrocarbon on the static and dynamic mechanical properties of carbon/carbon composites , 2014 .

[4]  Haifeng Cheng,et al.  Mechanical and microwave dielectric properties of KD-I SiCf/SiC composites fabricated through precursor infiltration and pyrolysis , 2014 .

[5]  F. Luo,et al.  Effects of thermal oxidation on electromagnetic interference shielding properties of SiCf/SiC composites , 2013 .

[6]  Zhaofeng Chen,et al.  Mechanical properties and microstructure of 3D sinking woven quartz fiber-reinforced silica composites by silicasol-infiltration-sintering , 2012 .

[7]  Jun Wang,et al.  Preparation of hollow Si-B-N ceramic fibers by partial curing and pyrolysis of polyborosilazane fibers , 2012 .

[8]  Xu Lei,et al.  Vibration characteristics of glass fabric/epoxy composites with different woven structures: , 2011 .

[9]  Haifeng Cheng,et al.  Effects of the fiber surface characteristics on the interfacial microstructure and mechanical properties of the KD SiC fiber reinforced SiC matrix composites , 2009 .

[10]  J. Lamon,et al.  Single‐ and Multilayered Interphases in SiC/SiC Composites Exposed to Severe Environmental Conditions: An Overview , 2009 .

[11]  G. Lu,et al.  Influence of heat treatment on the internal friction of 2D-C/SiC composites , 2009 .

[12]  Lai-fei Cheng,et al.  Internal friction and dynamic modulus of three-dimensional silicon carbide-matrix composites , 2005 .

[13]  Chang Boo Kim,et al.  Micro-frictional dissipation in fiber-reinforced ceramic matrix composites and interfacial shear estimation with a consideration of uneven fiber packing , 2005 .

[14]  R. Naslain.  Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview , 2004 .

[15]  Y. Kogo,et al.  Internal friction of carbon–carbon composites at elevated temperatures , 2003 .

[16]  A. Kohyama,et al.  Temperature dependence of internal friction and elastic modulus of SiC/SiC composites , 2003 .

[17]  A. Kohyama,et al.  Interfacial characterization of CVI-SiC/SiC composites , 2002 .

[18]  Lai-fei Cheng,et al.  High toughness, 3D textile, SiC/SiC composites by chemical vapor infiltration , 2001 .

[19]  Barry Marsden,et al.  A numerical study on the application of the Weibull theory to brittle materials , 2001 .

[20]  Akira Kohyama,et al.  Properties and radiation effects in high-temperature pyrolyzed PIP-SiC/SiC , 2001 .

[21]  A. Kohyama,et al.  High-performance SiC/SiC composites by improved PIP processing with new precursor polymers , 2000 .

[22]  J. Lamon,et al.  The influence of the interphase and associated interfaces on the deflection of matrix cracks in ceramic matrix composites , 2000 .

[23]  M. Singh,et al.  Measurement of Young’s modulus and damping for hexoloy SG silicon carbide , 1999 .

[24]  S. Phoenix,et al.  The single-filament-composite test: a new statistical theory for estimating the interfacial shear strength and Weibull parameters for fiber strength , 1998 .

[25]  F. Langlais,et al.  Preparation and characterization of 2D SiC/SiC composites with composition-graded C(B) interphase , 1997 .

[26]  M. N. Gungor,et al.  Damping behavior of 6061Al/Gr metal matrix composites , 1993 .

[27]  C. Cho,et al.  Estimation of Interfacial Shear in Ceramic Composites from Frictional Heating Measurements , 1991 .

[28]  B. Chabert,et al.  Characterization of a thermoplastic (polyamide 66) reinforced with unidirectional glass fibres. Matrix additives and fibres surface treatment influence on the mechanical and viscoelastic properties , 1990 .

[29]  Jacques Lamon,et al.  Statistical Approaches to Failure for Ceramic Reliability Assessment , 1988 .