A micro tri-generation system based on direct flame fuel cells for residential applications

Abstract A novel micro tri-generation system which combines a direct flame fuel cell, a boiler and a double-effect absorption chiller is proposed and analyzed for residential applications. Parametric analyses are conducted to investigate the effects of operating parameters (i.e. the equivalence ratio and the fuel utilization factor of the fuel cell) on the system efficiency and the thermal-to-electric ratio. Then optimum operating parameters are determined based on the typical energy demand of Hong Kong in the summer and the typical energy demand of Beijing in the winter, respectively. It is found that very high efficiency (over 90%) can be achieved by this novel tri-generation system for both Hong Kong and Beijing. Besides, the system is modified for combined heat and power cogeneration, combined cooling and power cogeneration and their efficiencies are compared with the tri-generation system to evaluate the effect of each single unit on the whole system.

[1]  Andrea Toffolo,et al.  Parameter Setting for a Tubular SOFC Simulation Model , 2004 .

[2]  Jie Zhou,et al.  Field Measurements of Residential Energy Consumption and Indoor Thermal Environment in Six Chinese Cities , 2012 .

[3]  Xiongwen Zhang,et al.  A review of integration strategies for solid oxide fuel cells , 2010 .

[4]  Georgios A. Florides,et al.  Design and construction of a LiBr–water absorption machine , 2003 .

[5]  Robert J. Braun,et al.  Evaluation of system configurations for solid oxide fuel cell-based micro-combined heat and power generators in residential applications , 2006 .

[6]  Alberto Coronas,et al.  REVIEW ON ABSORPTION TECHNOLOGY WITH EMPHASIS ON SMALL CAPACITY ABSORPTION MACHINES , 2013 .

[7]  Local Non‐Equilibrium Thermal Effects in Solid Oxide Fuel Cells with Various Fuels , 2013 .

[8]  Nigel M. Sammes,et al.  Novel applications for micro-SOFCs , 2000 .

[9]  E. Achenbach.  Three-dimensional and time-dependent simulation of a planar solid oxide fuel cell stack , 1994 .

[10]  Kevin Kendall,et al.  Micro-tubular solid oxide fuel cells and stacks , 2011 .

[11]  Yixiang Shi,et al.  Multi-level simulation platform of SOFC–GT hybrid generation system , 2010 .

[12]  J. Pátek,et al.  A computationally effective formulation of the thermodynamic properties of LiBr-H2O solutions from 273 to 500 K over full composition range , 2006 .

[13]  Viktor Dorer,et al.  Modelling and evaluation of building integrated SOFC systems , 2011 .

[14]  A. M. Férriz,et al.  Modelling and Performance of a Microtubular YSZ-based Anode Supported Solid Oxide Fuel Cell Stack and Power Module. , 2012 .

[15]  Reinhard Radermacher,et al.  Absorption Chillers and Heat Pumps , 1996 .

[16]  R. Lizarte,et al.  Air conditioning using an air-cooled single effect lithium bromide absorption chiller: Results of a trial conducted in Madrid in August 2005 , 2008 .

[17]  Jitian Han,et al.  Investigation on performance of an integrated solid oxide fuel cell and absorption chiller tri-gener , 2011 .

[18]  Kelvin K. W. Yau,et al.  A study of domestic energy usage patterns in Hong Kong , 2003 .

[19]  N. Sammes,et al.  Assembling single cells to create a stack: The case of a 100 W microtubular anode-supported solid oxide fuel cell stack , 2006 .

[20]  K. Kendall,et al.  A 1000-cell SOFC reactor for domestic cogeneration , 1998 .

[21]  Yixiang Shi,et al.  Integration of Solid Oxide Fuel Cells with Multi-Element Diffusion Flame Burners , 2013 .

[22]  B. Haberman,et al.  Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell , 2004 .

[23]  C. Adjiman,et al.  Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance , 2004 .

[24]  G. Xu,et al.  Theoretical analysis and optimization of a double-effect parallel-flow-type absorption chiller , 1997 .

[25]  S. Singhal,et al.  Advanced anodes for high-temperature fuel cells , 2004, Nature materials.

[26]  Takuto Araki,et al.  Cycle analysis using exhaust heat of SOFC and turbine combined cycle by absorption chiller , 2009 .

[27]  Nigel P. Brandon,et al.  Analysis of the impact of heat-to-power ratio for a SOFC-based mCHP system for residential applicati , 2011 .

[28]  F. Hamdullahpur,et al.  Performance Evaluation of Different Configurations of Biogas-Fuelled SOFC Micro-CHP Systems for Residential Applications , 2010 .

[29]  Wolfgang G. Bessler,et al.  A direct-flame solid oxide fuel cell (DFFC) operated on methane, propane, and butane , 2007 .

[30]  Zongping Shao,et al.  A high-performance no-chamber fuel cell operated on ethanol flame , 2008 .

[31]  Michio Horiuchi,et al.  Electrochemical Power Generation Directly from Combustion Flame of Gases, Liquids, and Solids , 2004 .

[32]  Nigel P. Brandon,et al.  Anode-supported intermediate-temperature direct internal reforming solid oxide fuel cell. II. Model-based dynamic performance and control , 2005 .

[33]  K. Kendall,et al.  Microtubular SOFC anode optimisation for direct use on methane , 2008 .

[34]  Eric Croiset,et al.  A multi-level simulation platform of natural gas internal reforming solid oxide fuel cell–gas turbine hybrid generation system: Part I. Solid oxide fuel cell model library , 2010 .

[35]  Alberto Coronas,et al.  Thermodynamic analysis of a trigeneration system consisting of a micro gas turbine and a double effect absorption chiller , 2011 .

[36]  Kevin Kendall,et al.  Progress in Microtubular Solid Oxide Fuel Cells , 2010 .

[37]  Zongping Shao,et al.  Coking-free direct-methanol-flame fuel cell with traditional nickel-cermet anode , 2010 .

[38]  Stefano Cordiner,et al.  Review of the micro-tubular solid oxide fuel cell: Part I. Stack design issues and research activities , 2009 .

[39]  K.S.Y. Wan,et al.  Representative building design and internal load patterns for modelling energy use in residential buildings in Hong Kong , 2004 .