Synthetic rope responses in the context of load history: The influence of aging

In order to design marine renewable energy mooring systems which are both economical and durable it is necessary to establish the lifecycle performance of individual components. In parallel with numerical tool development, physical component testing utilising realistic load cases is pivotal in achieving a greater understanding of performance variations including the contribution of degradation mechanisms. Building upon previous experimental tests conducted by the authors, tension–tension tests were conducted on a sample used in first part of the study and samples extracted from a mooring line which was deployed for 18 months with the South West Mooring Test Facility. In agreement with the first part of the study it was found that sample axial stiffness and damping are influenced by load history and instantaneous strain. The increased compliance, lower load bearing capacity and reduced tension–tension fatigue performance of aged specimens are symptomatic of fibre-on-fibre abrasion damage sustained in service. Visual inspections of the rope and yarns including scanning electron microscope analysis of fibres revealed that abrasion wear was accelerated by debris found within the rope structure, highlighting the importance of preventing particle ingress. Datasets are provided to facilitate the development of rope and mooring system simulation tools.

[1]  J. E. McIntyre,et al.  Synthetic fibres : nylon, polyester, acrylic, polyolefin , 2005 .

[2]  John F. Flory.  Cordage institute guidelines for marine grade nylon and polyester rope-making yarns , 2013, 2013 OCEANS - San Diego.

[3]  Patrice Cartraud,et al.  Analytical modeling of synthetic fiber ropes subjected to axial loads. Part I: A new continuum model for multilayered fibrous structures , 2007 .

[4]  I M L Ridge,et al.  Nylon fibre rope moorings for wave energy converters , 2010, OCEANS 2010 MTS/IEEE SEATTLE.

[5]  Lars Johanning,et al.  Offshore Reliability Approach for Floating Renewable Energy Devices , 2011 .

[6]  F. Mcgarry,et al.  The effects of sea water and concentrated salt solutions on the fatigue of nylon 6,6 fibres , 1985 .

[7]  Emmanuel Chailleux,et al.  Prediction of the long term behavior of synthetic mooring lines , 2003 .

[8]  Loic Dussud,et al.  Mechanical behaviour of HMPE and aramid fibre ropes for deep sea handling operations , 2011 .

[9]  Hongbo Shu,et al.  A Historical Review on Integrity Issues of Permanent Mooring Systems , 2013 .

[10]  J Mason Angela.  An Experimental Investigation of Damaged Arresting Gear Tapes for the Langley Aircraft Landing Dynamics Facility , 1999 .

[11]  Kenneth R. Bitting.  The Dynamic Behavior of Nylon and Polyester Line , 1980 .

[12]  S. D. Weller,et al.  Synthetic rope responses in the context of load history: Operational performance , 2014 .

[13]  Peter Davies,et al.  Development of HMPE Fiber for Permanent Deepwater Offshore Mooring , 2012 .

[14]  Jeffrey Otten,et al.  Thunder Hawk Mooring Rope Particle Ingress, Break, and Fatigue Testing , 2013 .

[15]  J. Hearle,et al.  Handbook of Fibre Rope Technology , 2004 .

[16]  S. Banfield,et al.  Computer Model To Predict Long-Term Performance Of Fiber Rope Mooring Lines , 2005 .

[17]  S. D. Weller,et al.  Durability of synthetic mooring lines for ocean energy devices , 2012 .

[18]  F.E.G. Chimisso,et al.  Modelling creep tests in HMPE fibres used in ultra-deep-sea mooring ropes , 2011 .

[19]  C. M. Leech,et al.  The prediction of cyclic load behaviour and modulus modulation for polyester and other large synthetic fiber ropes , 2003, Oceans 2003. Celebrating the Past ... Teaming Toward the Future (IEEE Cat. No.03CH37492).

[20]  Stanley Backer,et al.  Deterioration of Synthetic Fiber Rope during Marine Usage. Appendix A. , 1981 .

[21]  John F. Flory,et al.  Defining, Measuring, and Calculating the Properties of Fiber Rope Deepwater Mooring Lines , 2004 .

[22]  S. D. Weller,et al.  Physical Component Testing to Simulate Dynamic Marine Load Conditions , 2013 .

[23]  Emmanuel Chailleux,et al.  Modelling the Non-Linear Viscoelastic and Viscoplastic Behaviour of Aramid Fibre Yarns , 2003 .

[24]  C. M. Leech,et al.  Modelling Heat Buildup In Large Polyester Ropes , 1997 .

[25]  Lars Johanning,et al.  Measurements of static and dynamic mooring line damping and their importance for floating WEC devices , 2007 .

[26]  J. Flory,et al.  DeepStar taut leg mooring polyester test program , 1999, Oceans '99. MTS/IEEE. Riding the Crest into the 21st Century. Conference and Exhibition. Conference Proceedings (IEEE Cat. No.99CH37008).