Low-grade glued laminated timber beams reinforced using improved arrangements of bonded-in GFRP rods

Abstract This paper describes an experimental test programme which examines the strengthening in flexure of low-grade glued laminated timber beams (glulam) using bonded-in glass fibre reinforced polymer (GFRP) rods. Reinforcement configurations and arrangements previously not studied in the literature are reported on. The performance of unreinforced glulam beams, strengthened glulam beams using varying groove arrangements and different GFRP sized rods with single and double reinforcement was examined. The test results indicate that the geometrical arrangement of the routed out grooves is important and enhancements in the mechanical performance of the reinforced beams can be improved by reducing the effects of stress concentrations. The use of a number of smaller diameter rods per groove to increase the bond surface area proved to be of no advantage when reinforcing the beams. The unreinforced low-grade glulam exhibited linear elastic behaviour with brittle tensile failures in comparison to the nonlinear behaviour of the beams strengthened on their tensile face. Using a reasonable reinforcement percentage of 1.4% in the tension zone with circular routed grooves, mean stiffness enhancements of 11.2% and 13.9% for the global and local measurements were achieved respectively and a mean improvement in the ultimate moment capacity of 68% was achieved in comparison to the unreinforced glulam beams.

[1]  Martin P. Ansell,et al.  Bonded-in rod connections for timber structures—development of design methods and test observations , 2002 .

[2]  A. Harte,et al.  Bond quality at the FRP–wood interface using wood-laminating adhesives , 2009 .

[3]  Jerzy Jasieńko,et al.  Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips , 2013 .

[4]  V. Karbhari.  Durability of composites for civil structural applications , 2007 .

[5]  J. Barros,et al.  Bond behavior between glulam and GFRP’s by pullout tests , 2012 .

[6]  Aj Buchan,et al.  Glued laminated timber , 1964 .

[7]  A. Harte,et al.  Nonlinear numerical modelling of FRP reinforced glued laminated timber , 2013 .

[8]  A. R. Hutchinson,et al.  Pull-out behaviour of steel rods bonded into timber , 2001 .

[9]  Francesco Micelli,et al.  Flexural Reinforcement of Glulam Timber Beams and Joints with Carbon Fiber-Reinforced Polymer Rods , 2005 .

[10]  Jamal M. Khatib,et al.  Sustainability of construction materials , 2009 .

[11]  Jerzy Jasieńko,et al.  Experimental assessment of CFRP reinforced wooden beams by 4-point bending tests and photoelastic coating technique , 2009 .

[12]  G. Mays,et al.  Adhesives in Civil Engineering , 1992 .

[13]  M. Ansell,et al.  Experimental study of static and fatigue strengths of pultruded GFRP rods bonded into LVL and glulam , 2004 .

[14]  D Svecova,et al.  Flexural and shear strengthening of timber beams using glass fibre reinforced polymer bars — an experimental investigation , 2004 .

[15]  Annette M. Harte,et al.  Qualification of Wood Adhesives for Structural Softwood Glulam with Large Juvenile Wood Content , 2008 .

[16]  Sami H. Rizkalla,et al.  Timber Beams Strengthened with GFRP Bars: Development and Applications , 2002 .

[17]  George K. Criner,et al.  B848: Economic Analysis of Fiber-Reinforced Polymer Wood Beams , 2000 .

[19]  T. Russell Gentry,et al.  Performance of Glued-Laminated Timbers with FRP Shear and Flexural Reinforcement , 2011 .

[20]  L. Bank.  Composites for Construction: Structural Design with FRP Materials , 2006 .

[21]  Raymond Gilfillan,et al.  Pull-out behaviour of axially loaded Basalt Fibre Reinforced Polymer (BFRP) rods bonded perpendicular to the grain of glulam elements , 2013 .

[22]  H. Johnsson,et al.  Glulam members strengthened by carbon fibre reinforcement , 2007 .

[23]  A. Jesus,et al.  Study of strengthening solutions for glued-laminated wood beams of maritime pine wood , 2009 .

[24]  J. Comyn,et al.  Structural Adhesive Joints in Engineering , 1984, The Aeronautical Journal (1968).

[25]  L. Bednarz,et al.  Reinforcement of bent timber beams in historic buildings , 2009 .

[26]  Annette M. Harte,et al.  Material characterisation of fast-grown plantation spruce , 2014 .

[27]  A. R. Hutchinson,et al.  Effect of timber moisture content on bonded-in rods , 2001 .

[28]  Abdelhamid Bouchaïr,et al.  Analytical study and finite element modelling of timber connections with glued-in rods in bending , 2012 .

[29]  William M. Bulleit,et al.  Reinforcement of wood materials: a review , 2007 .

[30]  Karl Rautenstrauch,et al.  Post-strengthening of timber structures with CFRP's , 2007 .

[31]  Jin-Guang Teng,et al.  Strengthening and rehabilitation of civil infrastructures using fibre-reinforced polymer (FRP) composites , 2008 .

[32]  Annette M. Harte,et al.  Bonding of FRP materials to wood using thin epoxy gluelines , 2009 .

[33]  A. Harte,et al.  Low-grade glued laminated timber reinforced with FRP plate , 2011 .

[34]  David W. Scott,et al.  Wood Members Strengthened with Mechanically Fastened FRP Strips , 2006 .