The paper introduces the concept of power supply on chip (PwrSoC) which will enable the development of next generation, functionally integrated, power management platforms with applications in dc-dc conversion, gate drives, isolated power transmission and ultimately, high granularity, on-chip, power management for mixed-signal, SOC chips. PwrSoC will integrate power passives with the power management IC, in a 3D stacked or monolithic form factor, thereby delivering the performance of a high efficiency dc-dc converter within the footprint of a low efficiency linear regulator. A central element of the PwrSoC concept is the fabrication of power micro-magnetics on silicon to deliver micro-inductors and micro-transformers. The paper details the magnetics on silicon process which combines thin film magnetic core technology with electroplated copper conductors. Measured data for micro-inductors show inductance operation up to 20MHz, footprints down to 0.5mm2, efficiencies up to 93% and dc current carrying capability up to 600mA. Measurements on micro-transformers show voltage gain of approximately -1dB at between 10MHz and 30 MHz.
[1]
T. O'Donnell,et al.
Thin-Film-Integrated Power Inductor on Si and Its Performance in an 8-MHz Buck Converter
,
2008,
IEEE Transactions on Magnetics.
[2]
M. Brunet,et al.
High-frequency micro-machined power inductors
,
2005
.
[3]
Ningning Wang,et al.
High efficiency Si integrated micro-transformers using stacked copper windings for power conversion applications
,
2012,
2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[4]
T. O'Donnell,et al.
Magnetic-Core and Air-Core Inductors on Silicon: A Performance Comparison up to 100 MHz
,
2011,
IEEE Transactions on Magnetics.
[5]
S.C. O'Mathuna,et al.
Analysis of Microinductor Performance in a 20-100 MHz DC/DC Converter
,
2009,
IEEE Transactions on Power Electronics.
[6]
T. O'Donnell,et al.
Thin Film Microtransformer Integrated on Silicon for Signal Isolation
,
2007,
IEEE Transactions on Magnetics.