The characteristics of boiling heat transfer and pressure drop of R-600a in a circular tube with porous inserts

[1]  J. Turpin,et al.  Prediction of pressure drop for two‐phase, two‐component concurrent flow in packed beds , 1967 .

[2]  W. Nakayama,et al.  Dynamic Model of Enhanced Boiling Heat Transfer on Porous Surfaces—Part I: Experimental Investigation , 1980 .

[3]  Ryozo Echigo.  EFFECTIVE ENERGY CONVERSION METHOD BETWEEN GAS ENTHALPY AND THERMAL RADIATION AND APPLICATION TO INDUSTRIAL FURNACES , 1982 .

[4]  Y. Gortyshov,et al.  Experimental study of flow and heat exchange in highly porous structures , 1987 .

[5]  H. Ross,et al.  Horizontal flow boiling of pure and mixed refrigerants , 1987 .

[6]  S. Kandlikar.  A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes , 1990 .

[7]  Y. Gortyshov,et al.  Heat transfer in the flow of a single-phase and boiling coolant in a channel with a porous insert , 1991 .

[8]  D. Didion,et al.  Performance Evaluation of Two Azeotropic Refrigerant Mixtures of HFC-134a With R-290 (Propane) and R-600a (Isobutane) , 1994 .

[9]  Chung-Hsing Chao,et al.  Heat Transfer Measurement and Analysis for Sintered Porous Channels , 1994 .

[10]  Manfred Groll,et al.  Porous medium model for two-phase flow in mini channels with applications to micro heat pipes , 1994 .

[11]  S. Hsieh,et al.  An experimental study of flow boiling heat transfer in rib-roughened tube annuli , 1995 .

[12]  Min-Soo Kim,et al.  Experimental study on forced convective boiling heat transfer of pure refrigerants and refrigerant mixtures in a horizontal tube , 1997 .

[13]  B. Thonon,et al.  Experimental investigations on boiling of n-pentane across a horizontal tube bundle : two-phase flow and heat transfer characteristics , 1999 .

[14]  S. Hsieh,et al.  Evaporative heat transfer and enhancement performance of serpentine tubes with strip-type inserts using refrigerant-134a , 1999 .

[15]  T. Kuzay,et al.  Boiling liquid nitrogen heat transfer in channels with porous copper inserts , 1999 .

[16]  Evaporation Heat Transfer and Pressure Drop in Horizontal Tubes With Strip-Type Inserts Using Refrigerant 600a , 2000 .

[17]  Mo Se Kim,et al.  Performance and heat transfer characteristics of hydrocarbon refrigerants in a heat pump system , 2000 .

[18]  B. Wang,et al.  Boiling heat transfer on machined porous surfaces with structural optimization , 2001 .

[19]  S. M. You,et al.  Flow Boiling Heat Transfer From Plain and Microporous Coated Surfaces in Subcooled FC-72 , 2001 .

[20]  Barbara Watel,et al.  An Experimental Study of Convective Boiling in a Compact Serrated Plate-Fin Heat Exchanger , 2002 .

[21]  H. Boye,et al.  FLOW BOILING OF WATER AND n -HEPTANE IN MICRO CHANNELS , 2002, Proceeding of Heat Transfer and Transport Phenomena in Microscale.

[22]  J. Barbosa,et al.  Forced convective boiling of ternary mixtures at high qualities , 2002 .

[23]  Pradeep Bansal,et al.  Evaporating heat transfer and pressure drop of hydrocarbon refrigerants in 9.52 and 12.70 mm smooth tube , 2005 .

[24]  Ching-Yen Ho,et al.  Evaporation heat transfer and pressure drop characteristics of R-290 (propane), R-600 (butane), and a mixture of R-290/R-600 in the three-lines serpentine small-tube bank , 2005 .

[25]  P. Bansal,et al.  Characteristics of condensing and evaporating heat transfer using hydrocarbon refrigerants , 2006 .

[26]  V. Wadekar,et al.  TWO-PHASE PRESSURE DROP AND VOID FRACTION DURING FLOW BOILING OF ISO-OCTANE , 2007 .

[27]  Ching-Yen Ho,et al.  Boiling heat transfer of refrigerant R-600a/R-290-oil mixtures in the serpentine small-diameter U-tubes , 2007 .

[28]  Jürgen Schmidt,et al.  Flow Boiling of n‐Hexane in Small Channels: Heat Transfer Measurements and Flow Pattern Observations , 2007 .

[29]  John R. Thome,et al.  Flow boiling of ammonia and hydrocarbons: A state-of-the-art review , 2008 .

[30]  Savvas A. Tassou,et al.  Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes , 2009 .

[31]  Jixin Chen,et al.  Experimental study on the two phase flow behavior in PEM fuel cell parallel channels with porous media inserts , 2010 .

[32]  Du Yan.  EXPERIMENTAL INVESTIGATION OF BOILING HEAT TRANSFER IN HORIZONTAL TUBE PARTIALLY FILLED WITH METAL-FOAM , 2010 .

[33]  Yan Sun,et al.  Subcooled flow boiling heat transfer from microporous surfaces in a small channel , 2011 .

[34]  J. Cieśliński,et al.  Heat transfer and pressure drop during flow boiling of pure refrigerants and refrigerant/oil mixtures in tube with porous coating , 2012 .

[35]  Haitao Hu,et al.  Effect of oil on two-phase pressure drop of refrigerant flow boiling inside circular tubes filled with metal foam , 2013 .