Investigating Pulsed Discharge Polarity Employing Solid-state Pulsed Power Electronics

Abstract The power electronics technique has become a key technology in solid-state pulsed power supplies. Since pulsed power applications have been matured and found their way into many industrial applications, moving toward energy efficiency is gaining much more interest. Therefore, finding an optimum operation condition plays an important role in maintaining the desired performance. Investigating the system parameters contributed to the generated pulses is an effective way in improving the system performance further ahead. One of these parameters is discharge polarity, which has received less attention. In this article, the effects of applied voltage polarity on plasma discharge have been investigated in different mediums at atmospheric pressure. The experiments have been conducted based on a high-voltage DC power supply and a high-voltage pulse generator for point-to-point and point-to-plane geometries. Furthermore, the influence of electric field distribution is analyzed using finite-element simulations for the employed geometries and mediums. The experimental and simulation results have verified the important role of the applied voltage polarity, employed geometry, and medium of the system on plasma generation.

[1]  Kurt Faber,et al.  State of the Art and Outlook , 2011 .

[2]  Hongfu Li,et al.  Analysis of a 0.6-THz Second Harmonic Gyrotron With Gradually Tapered Cavity , 2014, IEEE Transactions on Plasma Science.

[3]  Richard J. Brown,et al.  Effect of Pulsed Power on Particle Matter in Diesel Engine Exhaust Using a DBD Plasma Reactor , 2013, IEEE Transactions on Plasma Science.

[4]  P. Corona,et al.  Corona Discharge Processes , 1991 .

[5]  A. Ghosh,et al.  A flexible solid-state pulsed power topology , 2012, 2012 15th International Power Electronics and Motion Control Conference (EPE/PEMC).

[6]  Xuming Zhang,et al.  The Plasma-Containing Bubble Behavior Under Pulsed Discharge of Different Polarities , 2015, IEEE Transactions on Plasma Science.

[7]  Robert J. Barker,et al.  Modern Pulsed Power: Charlie Martin and Beyond , 2004, Proceedings of the IEEE.

[8]  Kun He,et al.  Effect of Pulse Polarity on Nanosecond Surface Dielectric Barrier Discharge , 2014, IEEE Transactions on Plasma Science.

[9]  S. Katsuki,et al.  Positive- and Negative-Pulsed Streamer Discharges Generated by a 100-ns Pulsed-Power in Atmospheric Air , 2007, IEEE Transactions on Plasma Science.

[10]  Sanborn C. Brown,et al.  Electrical Coronas: Their Basic Physical Mechanisms , 1966 .

[11]  Y. Teramoto,et al.  Streamer Propagation of Positive and Negative Pulsed Corona Discharges in Air , 2011, IEEE Transactions on Plasma Science.

[12]  A. Ghosh,et al.  High-Voltage Modular Power Supply Using Parallel and Series Configurations of Flyback Converter for Pulsed Power Applications , 2012, IEEE Transactions on Plasma Science.

[13]  Mazen Abdel-Salam,et al.  Electric fields and corona currents in needle-to-meshed plate gaps , 2007 .

[14]  Pooya Davari,et al.  Sterilizing tissue-materials using pulsed power plasma , 2014, Journal of Materials Science: Materials in Medicine.

[15]  Firuz Zare,et al.  Analysing DBD plasma lamp intensity versus power consumption using a push-pull pulsed power supply , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[16]  S. Katsuki,et al.  Effect of polarity and rise time of applied pulsed voltage on streamer discharge phenomena , 2009 .

[17]  Bruce R. Locke,et al.  Electrohydraulic Discharge and Nonthermal Plasma for Water Treatment , 2006 .

[18]  T. Sakugawa,et al.  Industrial Applications of Pulsed Power Technology , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.