POWER QUALITY ISSUES, PROBLEMS, STANDARDS & THEIR EFFECTS IN INDUSTRY WITH CORRECTIVE MEANS

Latest innovative ideas to make the life easier using the technology depends upon the application of power electronics in turn about power quality. With increasing quantities of non-linear loads being added to electrical systems, it has become necessary to establish criteria for limiting problems from system voltage degradation. This paper presents the power quality problems, issues, related international standard, effect of power quality problem in different apparatuses and methods for its correction, which is actually a technology management. This is important for design engineers and researchers in power quality to know the international standards used for power quality.

[1]  T. S. Key,et al.  Analysis of harmonic mitigation methods for building wiring systems , 1998 .

[2]  T. S. Key,et al.  Costs and benefits of harmonic current reduction for switch-mode power supplies in a commercial office building , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[3]  L. Manz.  Applying adjustable-speed drives to three-phase induction NEMA frame motors , 1997 .

[4]  A. von Jouanne,et al.  Assessment of ride-through alternatives for adjustable speed drives , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[5]  J. Machowski,et al.  Simple robust adaptive control of static VAR compensator , 2007 .

[6]  E. Tironi,et al.  Some considerations on active compensation devices , 2007 .

[7]  V. K. Dhar.  Conducted EMI analysis. A case study , 1999, Proceedings of the International Conference on Electromagnetic Interference and Compatibility.

[8]  A.T. de Almeida,et al.  Technical and economical considerations in the application of variable speed drives with electric motor systems , 2004, Conference, 2004 IEEE Industrial and Commercial Power Systems Technical.

[9]  K. Mikolajuk,et al.  A new method for reduction of current and voltage harmonic distortion in power systems , 2007 .

[10]  Graeme Burt,et al.  Aircraft electrical systems - coping with harmonics for changing power demands , 2009, 2009 44th International Universities Power Engineering Conference (UPEC).

[11]  J.V. Milanovic,et al.  Sensitivity of personal computers to voltage sags and short interruptions , 2005, IEEE Transactions on Power Delivery.

[12]  J.G. Boudrias.  Harmonic mitigation, power factor correction and energy saving with proper transformer and phase shifting techniques , 2004, Canadian Conference on Electrical and Computer Engineering 2004 (IEEE Cat. No.04CH37513).

[13]  A. Y. Chikhani,et al.  Microprocessor controlled reactive power compensator for loss reduction in radial distribution feeders , 1991 .

[14]  Geza Joos,et al.  Performance analysis of a PWM inverter VAr compensator , 1991 .

[15]  G.T. Heydt,et al.  A power quality index based on equipment sensitivity, cost, and network vulnerability , 2004, IEEE Transactions on Power Delivery.

[16]  E. J. Stacey,et al.  Advanced state VAr generator employing GTO thyristors , 1988 .

[17]  Geza Joos,et al.  Analysis and design of a 3-phase current source solid-state VAR compensator , 1987, IEEE Power Electronics Specialists Conference.

[18]  Jih-Sheng Lai,et al.  Comparison of standards limiting harmonic distortion in power systems , 1991, Conference Record. Industrial and Commercial Power Systems Technical Conference 1991.

[19]  Phoivos D. Ziogas,et al.  Analysis and design of a three-phase synchronous solid-state VAr compensator , 1989 .

[20]  M. M. Morcos,et al.  Behavior of induction motor due to voltage sags and short interruptions , 2002 .

[21]  Wei Zhao,et al.  Dividing Frequency Control of Hybrid Active Power Filter With Multi-Injection Branches Using Improved $i_{p}$--$i_{q}$ Algorithm , 2009, IEEE Transactions on Power Electronics.

[22]  A. W. Kelley,et al.  Effects of power disturbances on computer systems , 1998 .

[23]  sponser.  IEEE recommended practice for emergency and standby power systems for industrial and commercial applications , 2013 .

[24]  L. Czarnecki.  Reactive and unbalanced currents compensation in three-phase asymmetrical circuits under nonsinusoidal conditions , 1989 .

[25]  S.B. Dewan,et al.  A large scale PWM solid state synchronous condenser , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[26]  Daniel W. Hart,et al.  Power Electronics , 2010 .

[27]  J. W. Gray,et al.  Industrial power quality considerations when installing adjustable speed drive systems , 1995 .

[28]  C. A. Gross,et al.  NEAR-OPTIMUM CAPACITOR ALLOCATION ON DISTRIBUTION FEEDERS FOR VOLTAGE CONTROL , 1994 .

[29]  Simone Buso,et al.  Design and fully digital control of parallel active filters for thyristor rectifiers to comply with IEC-1000-3-2 standards , 1998 .

[30]  G. Schroder,et al.  A novel approach to power factor control and balancing problems , 1994, Proceedings of IECON'94 - 20th Annual Conference of IEEE Industrial Electronics.

[31]  D. O. Koval,et al.  Power quality characteristics of computer loads , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[32]  Kamal Al-Haddad,et al.  A review of active filters for power quality improvement , 1999, IEEE Trans. Ind. Electron..

[33]  Janaka Ekanayake,et al.  A three-level advanced static VAr compensator , 1996 .

[34]  G. Blajszczak,et al.  Power Quality Park - Idea and feasibility study , 2010, Proceedings of the 2010 Electric Power Quality and Supply Reliability Conference.

[35]  Laszlo Gyugyi,et al.  Power electronics in electric utilities: static VAR compensators , 1988, Proc. IEEE.

[36]  V. Beldjajev,et al.  Harmonic losses in induction motors caused by voltage waveform distortions , 2010, Proceedings of the 2010 Electric Power Quality and Supply Reliability Conference.

[37]  David E. Rice,et al.  Adjustable Speed Drive and Power Rectifier Harmonics-Their Effect on Power Systems Components , 1986, IEEE Transactions on Industry Applications.

[38]  Yahia Baghzouz,et al.  OPTIMAL SHUNT COMPENSATION FOR UNBALANCED LINEAR LOADS WITH NONSINUSOIDAL SUPPLY VOLTAGES , 1991 .

[39]  J.-G. Boudrias.  Power factor correction and energy saving with proper transformer, phase shifting techniques and harmonic mitigation , 2004, 2004 Large Engineering Systems Conference on Power Engineering (IEEE Cat. No.04EX819).

[40]  A. D. de Almeida,et al.  Technical and economical considerations in the application of variable-speed drives with electric motor systems , 2005, IEEE Transactions on Industry Applications.

[41]  S.Z. Djokic,et al.  Sensitivity of AC coil contactors to voltage sags, short interruptions, and undervoltage transients , 2004, IEEE Transactions on Power Delivery.

[42]  M. B. Brennen,et al.  Vector analysis and control of advanced static VAr compensators , 1991 .

[43]  Y. Yoshioka,et al.  Self-commutated static flicker compensator for arc furnaces , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.

[44]  W. M. Grady,et al.  Predicting the net harmonic currents produced by large numbers of distributed single-phase computer loads , 1995 .

[45]  Longya Xu,et al.  A new converter topology for advanced static VAr compensation in high power applications , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.

[46]  C. E. Lin,et al.  A Real-Time Calculation Method for Optimal Reactive Power Compensator , 1989, IEEE Power Engineering Review.

[47]  P. W. Hammond,et al.  A new approach to enhance power quality for medium voltage AC drives , 1997 .