Reusing steel and aluminum components at end of product life.

Reusing steel and aluminum components would reduce the need for new production, possibly creating significant savings in carbon emissions. Currently, there is no clearly defined set of strategies or barriers to enable assessment of appropriate component reuse; neither is it possible to predict future levels of reuse. This work presents a global assessment of the potential for reusing steel and aluminum components. A combination of top-down and bottom-up analyses is used to allocate the final destinations of current global steel and aluminum production to product types. A substantial catalogue has been compiled for these products characterizing key features of steel and aluminum components including design specifications, requirements in use, and current reuse patterns. To estimate the fraction of end-of-life metal components that could be reused for each product, the catalogue formed the basis of a set of semistructured interviews with industrial experts. The results suggest that approximately 30% of steel and aluminum used in current products could be reused. Barriers against reuse are examined, prompting recommendations for redesign that would facilitate future reuse.

[1]  R. Ayres.  Turning point: The end of exponential growth? , 2006 .

[2]  R. G. Fenton,et al.  Supporting Design for Remanufacture through Waste-Stream Analysis of Automotive Remanufacturers , 2000 .

[3]  Roland Clift,et al.  Time-dependent material flow analysis of iron and steel in the UK: Part 2. Scrap generation and recycling , 2007 .

[4]  Hiroki Takano,et al.  Incremental forming of nonuniform sheet metal: Possibility of cold recycling process of sheet metal waste , 2008 .

[5]  Michael D. Engelhardt,et al.  EXPERIMENTS ON THE IMPACT OF HIGHER STRENGTH STEEL ON LOCAL BUCKLING AND OVERSTRENGTH OF LINKS IN EBFs Progress Report to the American Institute of Steel Construction , 2001 .

[6]  I. Daigo,et al.  Outlook of the world steel cycle based on the stock and flow dynamics. , 2010, Environmental science & technology.

[7]  Kurt Buxmann,et al.  Analysis of greenhouse gas emissions related to aluminium transport applications , 2009 .

[8]  Bill Addis,et al.  Building with Reclaimed Components and Materials: A Design Handbook for Reuse and Recycling , 2006 .

[9]  Vera Straka,et al.  FACILITATING GREATER REUSE AND RECYCLING OF STRUCTURAL STEEL IN THE CONSTRUCTION AND DEMOLITION PROCESS , 2006 .

[10]  Julian M. Allwood,et al.  Conserving our metal energy: avoiding melting steel and aluminium scrap to save energy and carbon , 2011 .

[11]  Yasushi Umeda,et al.  Analysis of Reusability using ‘Marginal Reuse Rate’ , 2006 .

[12]  Julian M. Allwood,et al.  Sustainable Materials - With Both Eyes Open , 2012 .

[13]  J. O N A T H A,et al.  Options for Achieving a 50% Cut in Industrial Carbon Emissions by 2050 , 2010 .

[14]  Yasushi Umeda,et al.  Analysis of Reusability using Marginal Reuse Rate , 2002 .

[15]  Thomas E. Graedel,et al.  Aluminum in-use stocks in China: a bottom-up study , 2010 .

[16]  Thomas E. Graedel,et al.  Aluminium in-use stocks in the state of Connecticut , 2008 .

[17]  Geraldo Ferrer,et al.  The economics of tire remanufacturing , 1997 .