论文信息 - Process Optimization for Piezoelectric Films and Coatings

Process Optimization for Piezoelectric Films and Coatings

The dielectric and piezoelectric response of sol gel based films and composite coatings is affected by the choice of process, gel composition, thermal cycle, processing atmosphere and poling conditions. Important general factors for thin films are the crystallization kinetics and the effects of residual carbon, while a new dielectric technique allows poling methods to be evaluated.

[1] Michael Sayer,et al. Preparation of Pb(Zr,Ti)O3 thin films by sol gel processing: Electrical, optical, and electro‐optic properties , 1988 .

[2] M. Sayer,et al. Sol gel processing of thick PZT films , 1992, ISAF '92: Proceedings of the Eighth IEEE International Symposium on Applications of Ferroelectrics.

[3] M. Sayer,et al. Crystallization of sputtered lead zirconate titanate films by rapid thermal processing , 1992 .

[4] Michael Sayer,et al. Sol-gel processing of PLZT thin films , 1995 .

[5] W. K. Choi,et al. Electrical characterization of radio frequency sputtered hydrogenated amorphous silicon carbide films , 1997 .

[6] D. A. Barrow,et al. Characterization of thick lead zirconate titanate films fabricated using a new sol gel based process , 1997 .