论文信息 - A Comparative of Life Cycle Assessment of Post-combustion, Pre-combustion and Oxy-fuel CO2 Capture

A Comparative of Life Cycle Assessment of Post-combustion, Pre-combustion and Oxy-fuel CO2 Capture

Abstract This paper presents a life cycle assessment (LCA) of three different carbon dioxide (CO 2 ) capture technologies, namely post- combustion, pre-combustion and oxy-fuel capture. The Boundary Dam Power Station (BDPS) in Saskatchewan, Canada was chosen as a case study for modeling of operations at the electrical generating station. This study showed that CO 2 capture technologies have the potential of reducing greenhouse gas (GHG) emissions. Where an increase in the impact categories associated with soil and water was observed, the release of pollutants to the atmosphere were reduced and became more manageable in their waste streams.

[1] Sevket Durucan,et al. Life cycle modelling and comparative assessment of the environmental impacts of oxy-fuel and post-combustion CO2 capture, transport and injection processes , 2011 .

[2] Martin Pehnt,et al. Life cycle assessment of carbon dioxide capture and storage from lignite power plants , 2009 .

[3] Xiangping Zhang,et al. Post-combustion carbon capture technologies: Energetic analysis and life cycle assessment , 2014 .

[4] Sevket Durucan,et al. Full Chain Analysis and Comparison of Gas-Fired Power Plants with Co2 Capture and Storage with Clean Coal Alternatives , 2013 .

[5] Joris Koornneef,et al. Life cycle assessment of a pulverized coal power plant with post-combustion capture, transport and storage of CO2 , 2008 .

[6] Wilhelm Kuckshinrichs,et al. Environmental assessment of German electricity generation from coal-fired power plants with amine-based carbon capture , 2009 .

[7] Edgar G. Hertwich,et al. Comparative life cycle environmental assessment of CCS technologies , 2011 .

[8] Lidia Lombardi,et al. Life cycle assessment comparison of technical solutions for CO2 emissions reduction in power generation , 2003 .