The novel results of the R & D activity of TDI SIE SB RAS in the field of the optical measuring technologies, as well as laser technologies for solving actual problems are presented. The metrological characterization of a perspective Fresnel method for high precision measuring the dimensions of objects is investigated. An optoelectronic noncontact method using diffractive optical element for the 3D inspection of article holes is presented. For permanent noncontact bearing position inspection of oil-drilling platforms on Sakhalin coast (Russia) under extreme temperatures (± 40°C) we have developed optical-electronic method and system SAKHALIN. Multifunctional laser technological system LSP-2000 equipped by two Nd-YAG lasers was developed for cutting, welding and surface micro profiling with ablation process (working range of 3 × 3 × 0.6 m, positioning error less than 10 μm). Safety of Russian nuclear reactors takes 100 % noncontact 3D dimensional inspection of all parts of fuel assemblies, including grid spacers. Results of development and testing the specialized high productive laser measuring machine, based on structured illumination, for 3D inspection of grid spacers with micron resolution are presented.
[1]
N. A. Yakovenko,et al.
Metrology for Fresnel measuring method
,
2006
.
[2]
R. A. Saunders,et al.
In-process drilled hole inspection for aerospace applications
,
1991
.
[3]
Yuri V. Chugui,et al.
Laser measuring machine for 3D noncontact inspection of geometric parameters of grid spacers for nuclear reactors VVER-1000
,
2002,
Other Conferences.
[4]
Valery P. Kiryanov.
Laser setup for flat optical components fabrication with submicron resolution
,
1997,
Other Conferences.
[5]
Yuri Chugui,et al.
Novel optical measuring systems and laser technologies for science and industry
,
2006,
International Symposium on Precision Mechanical Measurements.